BAUKNECHT GKN 19G4S A2+ IN Daily Reference Guide

QUICK START GUIDE
EN
Read the Instructions for Use carefully before using the appliance.
1
2
3
4
11
5
6
7
8
12
9
10
13
1. External Indicators of Power On and alarms
2. Control panel
3. LED’s lighting*
4. Ice packs*
5. Ice Mate* or Ice tray*
6. Drawer divider*
7. Bottle rack*
9. Rating plate with commercial name
10. Door reversibility kit
11. Area for freezing fresh food or to store frozenfood
12. Area for storing frozen foods
13. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for approximately 1 second. The default (factory) values of the freezer compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2) Is recommended to reverse door swing by two persons. There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may varyfrom model to model
POWER ON (EXTERNAL LED) indicator
An external green LED showing that the appliance is switched ON. It automatically turns off when opening
PROFREEZE FREEZE CONTROL
ProFreeze / Freeze Control is an advanced technology that reduces freeze burns and food preserves its original quality and color.
the door.
PARTY MODE indicator
FAST FREEZE indicator
TEMPERATURE DISPLAY
ON/STANDBY button
To put the product in Stand-by, press and hold for 3 seconds the On/Standby button. All the icons turn off. To reactivate the appliance press once (briefly) this button.
FREEZE CONTROL indicator
PARTY MODE / FREEZE CONTROL button Party Mode
Press for 3 seconds the Freeze Control button to activate/ deactivate the Party Mode function. Use this function to chill drinks inside the freezer compartment. Important: do not leave the bottle inside the freezer compartment longer than the function is active (30 minutes).
Freeze Control
Freeze Control is an advanced technology that reduces temperature fluctuations in the whole freezer compartment to minimum. To activate/deactivate the Freeze Control function simply press FREEZE CONTROL button. If the function is engaged and the user modify the freezer temperature out of the working range, the function is automatically switched off. In case of Fast freezing is engaged, the function “Freeze control” is inhibited until the Fast Freezing function switched off
TEMPERATURE / FAST FREEZE button Temperature Setting
The appliance is normally factory-set for operation at the recommended temperature of -18°C. Theinternal temperature can be adjusted between -16°C and - 24°C, proceeding as follows:
Press the temperature setting button (°C). The storage temperature can be changed by -1°C witheach
pressure of the button: the value changes cyclically between -16°C and -24°C.
Fast Freeze
Press for 3 seconds to activate the Fast Freeze function (see the Instructions for Use). The function switches off automatically after about 50 hours.
(see the Instructions for Use).
ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm
Temperature alarm
Party Mode alarm
Long black-out alarm
The acoustical alarm is activated and the Alarm Indicator
The Temperature display blinks (°C) and the Alarm Indicator
The Party Mode Indicator
The Black Out Alarm icon (°C) blinks, showing the maximum temperature reached duringblackout.
blinks and the acoustical alarm is activated.
remains on, the Alarm indicator blinks and the Temperature display
blinks.
remains on.
The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.
The inside temperature is not adequate.
30 min. elapsed since Party Mode function has been activated. It is time to take out the bottle from the freezer (see Instructions for Use for more details).
Prolonged power failure, able to cause the inside temperature to increase to 0°C.
Press the Stop Alarm button blinks and the Alarm Indicator
Press the Party Mode button or alternatively Stop Alarm button to deactivate the Party Mode alarm - and remove the bottle from the freezer.
Press the Stop Alarm button blinks and the Alarm Indicator
ALARM EXTERNAL LED
This red LED can blink to show the occurrence of an alarm or a failure even when the door is closed. Please open the door and check on the internal Control Panel which alarm/failure is occurring.
SHOCK FREEZE indicator
BLACK OUT ALARM
Long Black-out Alarm indicator. (see the Instructions for Use)
SHOCK FREEZE button Shock Freeze function
Press to activate/deactivate the Shock Freeze function (see the Instructions for Use). The function switches off automatically after about 4-5 hours. Shock Freeze and Fast Freeze functions can’t be both active at the same time.
ALARM indicator (see the below Alarms Table)
STOP ALARM/FAST FREEZE button Stop Alarm
Press in case of alarm.
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.bauknecht.eu
®
Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.
DE
GB
NL FR
Printed in Italy 06/16 - Bauknecht
19514699300
Loading...