BAUKNECHT FL 7F4 Use & Care

Instructions for use

www.whirlpool.eu/register

Quick Guide

sumption kWh

60°/40°

THANK YOU FOR PURCHASING A BAUKNECHT PRODUCT.

To receive more comprehensive assistance, register the appliance on

www.bauknecht.eu/register

CONTROL PANEL

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

1. ON/OFF button

2. CHILD LOCK button

3. CLEANING ACTION button

4. CLEANING ACTION indicator lights

5. START/PAUSE button and indicator light

6. OPTION button and indicator light

7. DELAY START button

8. SPIN button

9. TEMPERATURE button

10. WASH CYCLE SELECTOR KNOB

WASH CYCLE TABLE

Maximum load 7 kg Power input in o mode 0.5 W / in left-on mode 8 W

Wash cycle

1 Anti-Stain 100 40 °C

2 Anti-Stain 45‘ 40 °C

3 Whites 60 °C

4 Bed&Bath 60 °C

Eco cotton

(1)

6 Mixed 40 °C

7 Cotton (2) 40 °C

8 Synthetics (3) 40 °C

9 Colours 40 °C

10 Rapid 30' 30 °C

11 Wool 40 °C

12 Darks 30 °C

13 Ultra-delicate 30 °C

14 Duvets 30 °C

Rinse – – 1400 7,0 ** – –

Spin & Drain * – – 1400 7,0 ** – – – – – – – –



Required dosage  Optional dosage

Temperature

Default Range

- 40 °C 1400 7,0 **

- 40 °C 1200 3,5 ** –

- 90 °C 1400 7,0 **

- 60 °C 1400 7,0 **

60 °C

60° C 1400 7,0 175 –

40°C 1400 7,0 230 –

- 40 °C 1000 3,5 ** –

- 60 °C 1400 7,0 230 –

- 60 °C 1200 4,0 195

- 40 °C 1400 7,0 **

- 30 °C 800 3,0 30 –

- 40 °C 800 1,5 ** –

- 30 °C 800 4,0 ** –

- 30 °C

- 30 °C 1000 2,0 ** –

Maximum

spin

(r.p.m.)

Maximum

load (kg)

Duration

(minutes)

1,0 ** –

DISPLAY

Detergents and Additives

Prewash Wash

Fabric

softener

1 2 3

   

 

   

   

 

  

   

 



Recommended

detergent

Powder Liquid

Residual

dampness %

– – – –

–



– – –

– – – –

53 0,96 52,5

53 0,96 71

–



– – –

– 53 0,96 71

– 33 0,75 72

– – – –

–



71 0,19 29

– – –

– – – – –

Energy con-

Total water l

The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010: This cycle is designed for normally soiled cotton loads and is the most ecient in terms of both electricity and water consumption; it should be used for garments washable at 60°C or at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

For all testing institutes:

2) Long cotton cycle: set cycle 7 at a temperature of 40°C.

3) Long synthetics cycle: set cycle 8 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only. ** The duration of the wash cycles can be checked on the display.

DETERGENT DISPENSER DRAWER

Compartment 1: Prewash detergent (powder)

Compartment 2: Washing detergent (powder or liquid)

If liquid detergent is used, the removable plastic partition A (supplied) should be used for proper

dosage. If powder detergent is used, place the partition

into slot B.

Compartment 3: Additives (fabric softeners,

etc.)

The fabric softener must not exceed the “MAX” level.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Anti-Stain 100

This cycle is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of dierent colours. We recommend the use of powder detergent. Pre-treatment with special additives is recommended if there are obstinate stains

Anti-Stain 45’

This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics and coloured garments.

Whites

For heavily soiled whites and resistant colours.

Bed&Bath

For washing home linen in a single cycle. It optimises the use of fabric softener and allows for saving time and electricity. We recommend the use of powder detergent.

Eco cotton

Suitable for washing moderately soiled cotton garments. At 40°C and 60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Mixed

To wash mixed and coloured items together.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Colours

For washing coloured cotton garments. This programme is optimised to keep colours bright even after repeated washing.

Rapid 30’

For washing lightly soiled garments in a short time. Not suitable for wool, silk and garments to be washed by hand.

Wool - Woolmark Apparel Care - Green:

The “Wool” wash cycle is approved by the Woolmark Company for washing wool garments classied as “hand-washable”, provided that the wash complies with the instructions appearing on the garment’s label and with those provided by the manufacturer of this washing machine. (M1126)

Darks

For washing dark-coloured garments. The wash cycle is designed to preserve dark colours over time. We recommend using a liquid detergent for best results, preferably when washing dark-coloured garments.

Ultra-delicate

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on delicate garments.

Duvets

Suitable for washing clothing padded with goose down, such as single duvets (weighing under 2 kg), cushions or down jackets. Duvets should be loaded into the drum with their edges folded inwards and no more than ¾ of the total drum volume should be used up. For best results, it is advisable to use liquid detergent to be poured into the detergent drawer.

Rinse

Designed for rinsing and spinning.

Spin & Drain

Designed for spinning and draining the water.

DISPLAY

The display is useful when programming the washing machine and provides plenty of information.

The duration of the available wash cycles and the remaining time of a running cycle appear (the display will show the maximum duration of the cycle chosen, which may decrease after several minutes, since the eective duration of the programme varies depending on the wash load and the settings chosen); if the DELAY START option has been set, the countdown to the start of the selected wash cycle will appear. Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst time, run a wash cycle with detergent and no laundry, by setting the “Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; the indicator light relative to START/PAUSE will ash slowly green.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- The machine automatically displays the maximum temperature and spin

speed values for the selected cycle, or the most recently used settings if they are compatible with the selected cycle. Pressing the button gradually reduces the temperature down to the cold wash “OFF” setting. Pressing the button gradually reduces the spin speed until it is completely excluded (“OFF” setting). Pressing the buttons further restores the maximum allowed values for the selected cycle.

- Select the desired option.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the indicator light will ash amber. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove garments, press the START/PAUSE button to pause the cycle; the indicator light will ash amber. If the symbol is not lit, the door may be opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the relative indicator light will ash amber), then select the desired cycle and press the START/PAUSE button again. ! To cancel a cycle that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “END” on the display; when the symbol switches o, the door may be opened. Open the door, unload the laundry and switch o the machine. If you do not press ON/OFF button, the washing machine will switch o automatically after about a half of an hour.

OPTIONS

- If the selected option is not compatible with the set wash cycle, the indicator light will ash and the option will not be activated.

Prewash

Allows you to perform a prewash.

Delay start

To set a delayed start for the selected cycle, press the corresponding button repeatedly until the desired delay period is reached. When this option has been activated, the symbol lights up on the display. To remove the delayed start setting, press the button until “OFF” appears on the display. Temperature Each wash cycle has a pre-dened temperature. To modify the temperature, press the button. The value will appear on the display.

+ 6 hidden pages