Bauhn ATV32HDS-0420 User Manual
Quick Start Guide
Hey!
Let’s get your new TV
ready to use, fast!
Have you got everything?
Model: ATV32HDS-0420
You will also need:
• Phillips-head screwdriver
• Someone to help lift the TV
D
G
F
H
I
E
J
K
Unpack the box (be gentle) and make sure all of these items are there:
A. 32”HD Smart TV
B. Remote Control
C. AAA Activ Energy Batteries (2)
D. TV Stands (2)
E. Screws for TV Stands (4)
F. Warning Sheet
G. TV Toppling Safety Message
H. Quick Start Guide
I. Warranty Certicate
J. General Safety Warnings
K. User Manual
Attach the TV stand
Unless you are wall-mounting the TV, you will need to
attach its stand/legs. If you do want to wall mount the
TV, see page 7 of the User Manual.
Lay the TV face-down on a soft,
at surface (like the sofa, or a
towel on a table) larger than the
TV itself.
Match the stands to the
installation points on the
underside of the TV.
Attach the stands to the TV at
the installation points using
the screws provided.
(Grab a screwdriver
for this bit).
This TV is heavy!
We recommend asking
someone to help you lift it.
Which plug goes where?
Want to hook up your new TV to a gaming console or something else?
Use the basic guide below to see what the plug and port should look like for
different connections.
You can nd more of these on pages 10 - 11 of the User Manual.
(These cables do not come with your TV)
Use this to connect your soundbar, amplier, digital
TOSLINK OPTICAL AUDIO
CABLE
receiver, or other external audio equipment.
Use this connection for a DVD player, gaming console,
HDMI CABLE
computer and camera.
To watch free-to-air TV channels, you need an antenna
connection.
ANTENNA CABLE
Use this cable to connect the TV to your modem for
LAN
LAN
ETHERNET CABLE
internet access. This TV also has Wi-Fi connectivity.
Get to know the remote
Familiarise yourself with the remote control - you’ll be
spending a lot of time together.
Here are some of the buttons you’ll be using most often.
On/Standby
Press twice to enter the
Point the remote
control at the
sensor on the TV
main menu settings
Access the input
sources and
smart apps list
Adjust the
volume
POWER
Web Browser
Navigate and
select/conrm
Change the
channel
Launch apps
On-screen set-up
Follow the on-screen set-up prompts
to set your country and language,
read and accept the license
agreement, connect the TV to the
internet, and tune TV channels.
Press to conrm a
selection
go to the next step
Note: If you choose to setup Netix or select an input source other
than DTV, the set up wizard will exit and will not let you tune TV
channels. To tune channels, go to: Menu > Channel > Auto Tuning.
Press to
Uh-oh, this isn’t right...
Set-up not going smoothly? We’ve got you!
We just need you to check a few things rst:
Is it plugged in?
A new TV is exciting! So it’s easy to forget
something simple - like plugging it into the power
outlet. Psst... make sure the outlet is switched ON.
Look at the manual!
More often than not, the answer you need is right there in the User Manual.
The troubleshooting section on pages 47 - 49 may come in handy for tricky stuff.
Ok, time to give us a call
What? You mean the User Manual didn’t have ALL the answers? Speak
to us! We’d love to help you get up and running as quickly as possible.
Call our After Sales Support on 1300 886 649.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Your new TV is ready to enjoy!
Well done, you made it.
Now sit back and relax... your new TV is automatically covered
by a 1-year warranty. How nice!
Loading...