1500/17 - 3000/25
110431 - 110432
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 2.0
Date of preparation: 2022-04-19
EN
2
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of Signal Words .................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended Use ........................................................................................... 5
1.4 Unintended Use ....................................................................................... 5
2 General information ....................................................................................... 6
2.1 Liability and Warranty .............................................................................. 6
2.2 Copyright Protection ................................................................................ 6
2.3 Declaration of Conformity ........................................................................ 6
3 Transport, Packaging and Storage ................................................................ 7
3.1 Delivery Check ......................................................................................... 7
3.2 Packaging ................................................................................................ 7
3.3 Storage .................................................................................................... 7
4 Technical Data ............................................................................................... 8
4.1 Technical Specifications .......................................................................... 8
4.2 Functions of the Appliance ....................................................................... 9
4.3 List of Components of the Appliance ..................................................... 10
5 Installation and operation ............................................................................ 12
5.1 Installation .............................................................................................. 12
5.2 Operation ............................................................................................... 14
6 Cleaning ...................................................................................................... 21
6.1 Safety Instructions for Cleaning ............................................................. 21
6.2 Cleaning ................................................................................................. 21
7 Possible Malfunctions .................................................................................. 23
8 Disposal ....................................................................................................... 26
110431 1 / 26
Safety
EN
Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartung d es Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanweisunge n schafft die Voraussetzung für da s sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereich des Geräts geltenden örtlichen Unfall verhütungsvorschriften und allgemeine n Sicherheitsbestimmungen eingehalt en werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Ger äts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt w erden. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 26 110431
Safety
EN
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2 Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
110431 3 / 26
Safety
EN
• Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Supervised Usage only
• Only supervised appliance may be used.
• Always remain in an immediate vicinity of the appliance.
Operating Personnel
• The appliance may only be operated by qualified personnel and trained
specialist personnel.
• This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper Use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
4 / 26 110431
Safety
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Drying and polishing of washed stainless steel and silver cutlery.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
110431 5 / 26
General information
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
6 / 26 110431
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
110431 7 / 26
Technical Data
EN
Name:
Cutlery polishing machine
1500/17
Art. No.:
110431
Material:
stainless steel
Quantity of maize granulate, in kg:
1,7
Cutlery input opening width, in mm:
215
Cutlery output opening width, in mm:
100
Maximum output, number of cutlery pieces /
hour:
1500
Connected load:
0,4 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
510 x 480 x 3650
Weight, in kg:
25,6
Name:
Cutlery polishing machine
3000/25
Art. No.:
110432
Material:
stainless steel
Quantity of maize granulate, in kg:
2,5
Cutlery input opening width, in mm:
230
Cutlery output opening width, in mm:
130
Maximum output, number of cutlery pieces /
hour:
3000
Connected load:
0,56 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
580 x 560 x 410
Weight, in kg:
40,0
4 Technical Data
4.1 Technical Specifications
We reserve the right to implement technical modifications.
We reserve the right to implement technical modifications.
8 / 26 110431
Technical Data
EN
Version / Characteristics 110431-110432
• Polishing/drying method: heated maize granulate
• Fan for granulate removal
• UV lamp for cutlery disinfection
• ON/OFF switch
• Indicator lights:
– temperature
– heating-up
– ready for operation
– warning
• Features:
– Start/Stop key
– HACCP conformity due to operating temperature of 80°C
– Appliance dries the granulate for 10 minutes more after switching off
– Automatic switching off when the cover is opened
– Easy access to the cutlery channel
The 110431 set includes:
– 1 cutlery collection basket
– 2 kg of maize granulate
The 110432 set includes:
– 1 cutlery collection basket
– 1 cutlery collection sieve
– 3 kg of maize granulate
4.2 Functions of the Appliance
The cutlery polishing machine makes it possible to polish to high shine up to 1,500
or 3,000 cutlery pieces per hour. Cutlery pieces are hygienically disinfected owing
to the integrated UV lamp and the HACCP compliant operating temperature.
110431 9 / 26
Technical Data
EN
Fig. 1
1. Housing
2. Cutlery input opening
3. Feet (4 pcs)
4. Control panel
5. Cutlery output opening
6. Cutlery collection basket
7. Maize granulate
4.3 List of Components of the Appliance
Cutlery polishing machine 110431
10 / 26 110431
Technical Data
EN
Fig. 2
1. Housing
2. Cutlery input opening
3. Feet (4 pcs)
4. Control panel
5. Cutlery output opening
6. Cutlery collection sieve
7. Cutlery collection basket
8. Maize granulate
Cutlery polishing machine 110432
110431 11 / 26
Installation and operation
EN
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Leave at least 20 cm clearance from flammable walls and items.
12 / 26 110431
Installation and operation
EN
CAUTION!
If the transport protection is not removed or if it is not fully removed,
this may lead to the appliance being damaged.
Before starting the appliance, remove entire transport protection.
Keep all elements for re-use if the appliance is to be transported again or
moved to another location.
– lift the cover of the appliance,
– undo the fastening knob (A) and remove
the cover (B) (Fig. 3),
– remove fastening rods (C),
– before using the appliance make sure you
re-fit the cover (B) for closing the drying
bowl,
– before starting the appliance make sure
you re-fit the cover.
– re-fit the cover (B) and tighten it securely with the fastening knob (A).
Fig. 3
Transport Protection Removal
In order to remove the transport protection, proceed in the following way:
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
110431 13 / 26
Installation and operation
EN
Fig. 4
No.
Symbol
Description
1 Fuse
Overvoltage protection.
2 ON/OFF switch
For switching the appliance on and off.
This switch should always be on during operation of
the appliance; for the purpose of switching the
appliance on and off, use the START / END key (3).
5.2 Operation
Appliance Preparation
1. Before use, clean the appliance and accessories thoroughly, following
indications in section 6 'Cleaning and Maintenance'.
2. To end with, dry the appliance and accessories thoroughly.
Operating Elements / LED Indicator Lights
14 / 26 110431
Installation and operation
EN
No.
Symbol
Description
3 START / END key
The appliance is switched on by pressing this key.
By pressing this key during the operation, the appliance
is being switched off; the maize granulate is dried for
approx. 10 minutes before the appliance is switched off.
4 UV lamp LED indicator light
When the appliance is switched on, it indicates that the
UV lamp is working.
Flashing light indicates lamp malfunction.
5
'Power' / 'Cycle Switch-Off' LED indicator light
When the appliance is switched on, it indicates that the
power is supplied to the appliance.
Flashing light indicates that the maize granulate drying
cycle is in progress; next, it goes off (after approx. 10
minutes).
6 'Operating Temperature Reached' LED indicator light
When the appliance is switched on, it indicates that the
maize granulate has an optimum operating temperature.
Flashing light indicates that the maize granulate is being
heated up.
7 'Heating' LED indicator light
When the appliance is switched on, it indicates that
maize granulate is being heated up.
When the appliance is switched off, it indicates that the
maize granulate has an optimum operating temperature.
8 'ALARM 1' LED indicator light
See table in section 7 'Possible Malfunctions'
9 'ALARM 2' LED indicator light
See table in section 7 'Possible Malfunctions'
110431 15 / 26
Installation and operation
EN
Operation Description
Switch-On Phase
1. Plug the appliance into a suitable single socket.
2. Press the ON/OFF switch (2) to switch the appliance on.
The cutlery polishing machine is ready for operation.
3. Press the 'START' key (3) to start the appliance.
Drying Cycle
1. Wait for the appliance to reach the operating temperature.
The 'Operating Temperature Reached' LED indicator light (6) will light up
concurrently with the 'Heating' LED indicator light (7).
2. Operate the appliance as described in section 'Loading the Cutlery Polishing
Machine'.
Switch-Off Phase
1. After using the appliance, press the END key (3) to start the appliance’s switch-
off phase.
The appliance is switched off after approx. 10 minutes, whereas 'Power' / 'Cycle
Switch-Off' LED indicator light (5) is flashing.
When this time elapses the appliance stops and the 'Power' / 'Cycle Switch-Off'
LED indicator light (5) remains on in continuous mode for the remaining duration of
the drying cycle.
The switch-off phase is necessary to allow for full drying of the maize granulate.
Loading Appliance with Maize Granulate
1. Switch the appliance on by pressing the ON/OFF switch (2) and then press the
START key (3).
2. Slowly fill the cutlery input opening to the right side or at the top with appropriate
maize granulate.
NOTE!
Always add the exact quantity of the maize granulate, as presented in the
'Technical Data' table for a given appliance.
16 / 26 110431
Installation and operation
EN
Fig. 5
Fig. 6
CAUTION!
Never leave the cutlery polishing machine on if the drier's drum has not
been filled with the maize granulate to avoid overheating and damaging
the housing of the drier's drum.
Loading the Cutlery Polishing Machine
1. Switch the appliance on by pressing the ON/OFF switch (2).
2. Press the 'START' key (3) to start the appliance.
3. Before you put the cutlery in the cutlery input opening wait for the 'Heating' LED
indicator light (7) to light up.
CAUTION!
Load the appliance with properly cleaned cutlery (no fat or oil residues)
only, to avoid damaging the surface of the drier’s drum.
4. Place the supplied cutlery collection basket (Art. No.110431, Fig. 7) or cutlery
collection sieve (Art. No. 110432, Fig. 8) under the cutlery output opening.
5. Place the cutlery for drying into the cutlery input opening at the side (Art. No.
110431, Fig. 5) or on the top (Art. No. 110432, Fig. 6)
NOTE!
Load the cutlery to the cutlery input opening adding them gradually to
avoid mixing them up.
110431 17 / 26
Installation and operation
EN
Fig. 7
Fig. 8
In the upper area of the cutlery output
opening there is a blower which prevents
the granulate from leaving the appliance
with cutlery.
Moreover, the UV lamp installed there
disinfects cutlery (Fig. 9).
Fig. 9
Cutlery Drying / Cutlery Output
Cutlery goes into the drier’s drum with the maize granulate and is dried there (Fig.
10).
After the drying phase, cutlery leaves the cutlery polishing machine through the
cutlery output opening and go to the cutlery collection basket (Fig. 7) or to the
cutlery collection sieve with the cutlery collection basket (Fig. 8).
18 / 26 110431
Installation and operation
EN
1. If a cutlery piece is stuck in the
appliance and it blocks the transport
channel, open the appliance cover.
As soon as the cover is opened, a microswitch in the cover disconnects the motor
and heating element.
2. Remove the cover of the transport
channel to diagnose the malfunction and
troubleshoot it (Fig. 10).
Fig. 10
3. Reinstall removed elements, close the cover and continue the drying process.
Switching the Appliance Off
1. If the appliance is not to be used any more, it should be switched off with the
START/END key.
The appliance continues to work for approx. 10 min. and dries the granulate. As
soon as the time elapses, the appliance switches off.
2. Unplug the appliance.
Maize Granulate Replacement
ATTENTION!
Electronic counter counts the operating hours of the appliance. After
reaching the number of operating hours set by the manufacturer, alarm
indicator lights start flashing (see section 7 'Possible Malfunction'), which
signal a need to replace the maize granulate.
A warning light remains active in stand-by mode of the appliance, until
resetting of the hour counter. The fact that the set number of operating
hours is reached does not block further operation of the appliance.
110431 19 / 26
Installation and operation
EN
Fig. 11
Fig. 12
The method of replacing the maize granulate:
1. Remove the plug from the socket.
2. Open the cover of the appliance (Fig. 11).
3. Undo the fastening knob (A) of the drier's drum cover.
4. Remove the drier's drum cover (B).
5. Remove the maize granulate from the drier’s drum as much as possible, by
hand or using a small dustpan. The rest may be removed with a vacuum
cleaner.
6. Clean the inside of the drier’s drum and dry it thoroughly.
7. Always fill with the exact quantity of the maize granulate (see 'Technical Data'
table) directly into the drier's drum of the appliance (Fig. 12).
8. To end with, attach the drier's drum cover using the fastening knob (A).
9. Close the cover of the cutlery polishing machine.
Resetting Hour Counter
1. With the appliance on, press and hold the START/END key (3) and operate the
ON/OFF switch (set to 'I' position).
2. Release the START/END key (3).
The red Alarm 1 (8) and ALARM 2 (9) LED indicator light blink for 5 seconds. Next,
the hour counter is reset to zero and the appliance is ready for operation again.
20 / 26 110431
Cleaning
EN
6 Cleaning
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
Cleaning from Inside and Outside
1. Clean the appliance daily from the outside with warm water and a soft, damp
cloth.
2. Dry surfaces thoroughly with a soft cloth.
3. Clean the inside of the appliance (drier’s drum) each time when the maize
granulate is replaced. Follow the instructions in section 'Replacing Maize
Granulate'.
UV Lamp Cleaning
1. Remove the plug from the socket.
2. Open the cover of the appliance (Fig. 11).
3. Use the enclosed spanner to undo the top side fixing bolts of the appliance's
front plate and remove it.
110431 21 / 26
Cleaning
EN
4. Loosen the bottom side bolts (Fig. 13).
5. Use a soft cloth and carefully wipe dust
off of the fluorescent tube that might
have accumulated, for example, during
operation.
NOTE!
If possibly, try not to touch the
fluorescent tube with your hands.
Fig. 13
6. After cleaning of the UV lamp, re-bolt the front plate.
7. Close the appliance cover.
UV Lamp Replacement
1. Remove the plug from the socket.
2. Use the enclosed spanner to undo the top side fixing bolts of the appliance's
front plate and remove it.
3. Loosen the bottom side bolts (Fig. 13).
4. Dismantle the fluorescent tube by turning it by 90° and carefully removing it.
5. Install a new fluorescent tube.
ATTENTION!
Handle the fluorescent tube carefully and, if possible, do not touch it with
bare hands not to soil the surface during installation.
6. Finally, re-bolt the front plate of the appliance.
7. Close the appliance cover.
ATTENTION!
In order to ensure proper operation, the UV lamp (fluorescent tube) should
be always replaced after 8,000 operating hours.
22 / 26 110431
Possible Malfunctions
EN
No.
Symbol
Problem
Possible Cause
Solution
1+2
Appliance
does not
work
No power supply
Check the power cord
and make sure that the
plug has been correctly
inserted into the mains
socket
Fuse damaged
Replace the fuse
ON/OFF switch in 'O'
position
Set the ON/OFF switch
to 'O' position
Cover is not closed
properly
Close the appliance
cover
4
LED 4
indicator light
is flashing
Damaged UV lamp
Replace the UV lamp
Damaged lamp
socket
Replace the lamp
socket
8
LED 8
indicator light
is flashing
Flashing indicates
that no power supply
reaches the motor
Check the motor’s
power supply, possibly
contact the service
company in order to
replace the motor
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
110431 23 / 26
Possible Malfunctions
EN
No.
Symbol
Problem
Possible Cause
Solution
9
LED 9
indicator light
is flashing
Flashing indicates
that the motor is
blocked
Disconnect the
appliance from mains
power supply and make
sure there are no
cutlery pieces in the
drier's drum that would
hinder motor rotations
Otherwise, contact the
service company in
order to replace the
motor
6+8
LED 6 and
LED 8
indicator
lights are
flashing
If both (6+8) or (6+9)
LED indicator light
are flashing, the
temperature probe
malfunctioned (probe
shorting or probe not
connected)
In this status, the
cycle of 8 minutes
of OFF and 8
minutes of ON
starts, during which
the resistor is
controlled directly
by the printed
circuit board.
Replace the
temperature probe
6+9
LED 6 and
LED 9
indicator
lights are
flashing
24 / 26 110431
Possible Malfunctions
EN
No.
Symbol
Problem
Possible Cause
Solution
4+5+
6+7+
8+9
LED 4, 5, 6,
7, 8, 9
indicator
lights are
flashing
If all the indicated
LED indicator lights
are flashing (4, 5, 6,
7, 8, 9), you need to
replace the maize
granulate and reset
the hour counter.
Replace the maize
granulate and reset the
hour counter (following
indications in sections
'Maize Granulate
Replacement' and
'Resetting Hour
Counter')
Appliance is
not heating
up
Damaged heating
element
Contact the service
company
110431 25 / 26
Disposal
EN
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Electrical appliances should be returned to designated collection points.
26 / 26 110431
Loading...