www.barska.com
Digital Wi-Fi Imager
For IOS & Android Mobile Devices
micro
2 3
Notes Before Use
- Do not disassemble the product.
- Do not clean the product with alcohol
organic solvents.
- Do not touch the lens with your ngers.
- Avoid outdoor use.
- If the product gets wet, leave PC connection
immediately. Do not dissemble or try to dry
product. Send to repair center if the product was
affected by liquid or other elements.
- Measurement data is only for reference.
- Fully charge product before using. When
charging, the red LED light will be off
automatically indicating that the internal battery
is fully charged.
- Do NOT use product while charging.
- Portable power supply can also be used to
charge the product.
- It is normal for the product to get hot with
continuous use of 10 minutes. Turn microscope
off and allow it to cool off for 30 mins
before re-using.
Contents
Parts Of The Imager
On/Off
Reset
Low Battery
Charging
WiFi
1.25”
Astronomical
Adaptor
Micro USB
Charging
Port
Includes 0.91” Inch
Microscope Adaptor
Parts Of The Imager 3
Set Up 4
Using The Application 6
Internal Battery 6
Reset Button 6
Technical Data 7
Warranty 8
Loading...