Barco FS35 User Manual
an introducon to
an introducon to
the projector
the projector
F35/FL35
user’s guide
user’s guide
Designed and manufactured in Fredrikstad, Norway.
www.projectiondesign.com
english
F35/FL35
UF35/FL35
user’s guide
user’s guide - Introduction
2
1 Contents of this User’s Guide
1 Introduction 6
1.1 Thank you
1.2 Features
2 Safety Instructions 9
2.1 SAFETY
2.2 GENERAL WARNINGS
2.2.1 INFORMATION AND WARNING ABOUT POTENTIAL HEALTH ISSUES RELATED TO MERCURY
VAPOR (UHP lamps only)
2.2.2 HEAVY DUTY AND CONTINOUS USE (UHP lamps only)
2.2.3 SERVICE PERSONNEL INFORMATION WARNING (UHP lamps only)
2.2.4 REMOTE CONTROL WARNING
2.2.5 WARNING SYMBOLS
2.3 FCC
2.4 WEEE INFORMATION
2.5 RECYCLING
2.6 SERVICE INFORMATION
english
3 What’s in the box? 13
4 Getting to know the projector 15
4.1 Overview
4.2 Indicators
4.2.1 The status indicator
4.2.2 Keypad
4.2.3 Remote control
4.3 Connectivity
4.4 Graphical User Interface (GUI)
5 Basic setup 21
5.1 Lens
5.1.1 Lens and lens mount
5.1.2 Inserting a lens
5.1.3 Replacing a lens
5.2 Adjusting on screen image size and position
5.3 Lamp operation
5.4 Projector rotation
5.5 Ceiling mount
5.5.1 Ceiling mount cover (optional)
3
www.projectiondesign.com
english
5.5.2 Attaching the ceiling cover
5.6 Connection and cables
5.6.1 Setting up a video source
5.6.2 Setting up a computer source
5.6.3 Connecting command and control interfaces
5.6.4 Attaching X-PORT™ modules
5.7 Using X-PORT™ modules
5.7.1 X-PORT DCC120
5.7.2 X-PORT 3G-SDI
5.7.3 X-PORT HDMI 3D
5.8 Image alignment
5.9 Setting image orientation
5.10 Using source scan
5.11 Limiting OSD messages
5.12 Changing the language of the menu system
5.13 Identifying system status
5.13.1 Getting information about the active source
5.14 Using the dual lamp system (UHP models only)
5.15 Configuring 3D (AS3D)
5.16 Image sizes
6 Advanced setup 35
6.1 Controlling multiple projectors with remote control ID (RCID)
6.2 Protecting the projector with a pin code
6.3 Using dual head input
6.4 Multi-channel 3D synchronization
6.4.1 Synchronous frame sequential
6.4.2 Asynchronous frame sequential
6.4.3 Synchronous side-by-side
6.4.4 Asynchronous side-by-side
6.5 Setting custom color space and digital level
6.6 Disabling IR receivers
6.7 Controlling screens with triggers
6.8 Setting aspect trigger behavior
6.9 Automatic power on/off
6.9.1 Using the timer
6.9.2 Using DPMS (Display Power Management Signaling)
6.10 Disabling LED indicators
6.11 Setting the background color
6.12 Selecting the startup logo
6.13 Setting OSD menu timeout
6.14 Selecting the startup logo
User’s Guide – Introduction
F35/FL35
user’s guide - Introduction
4
7 Optimising the picture 43
7.1 Calibration data
7.1.1 Updating RealColor™ calibration data
7.2 Working with RealColor™
7.2.1 Setting the BrilliantColor™ correctly
7.2.2 Gamma
7.2.3 RealColor™ operating modes
7.2.4 Setting a white point or color temperature
7.2.5 Defining the system color gamut
8 Maintenance 49
8.1 Software upgrades
8.2 Lamp replacement (UHP units only)
9 Technical specifications 51
9.1 Product details
english
5
www.projectiondesign.com
english
1 Introduction
1.1 Thank you
Thank you for purchasing this projector.
The F35 projectors set an industry benchmark for projectors in its size and performance
category. Featuring high resolution DLP technology, high performance optics and lenses,
updated signal processing and built-in frame-lock synchronisation makes it the ideal projector
for multi-channel visualisation and simulation applications, where realism and reliability are
key criteria. In addition the excellent image performance, the 1080p and WUXGA version are
capable of Active Stereo 3D.
1.2 Features
• 1080p (1920x1080), WUXGA (1920 x 1200), panorama (2560x1080) or WQXGA (2560 x
1600) resolution single chip DLP® technology
• Patented Dual Architecture or LED illumination system and optics
• RealColor advanced colour management suite
• Fail safe, hot swap Dual Lamp architecture or longlife LED illumination
• Dual optomechanical IRIS for customizable brightness and contrast
• Full powered horizontal and vertical lens shift, allows direct stacking
• Full 12-bit colour resolution for minimised artefacting and high accuracy
• BrilliantColor™ technology with six-colour processing for accurate colours
• Elevated contrast levels for unmatched image dynamics
• High brightness for large screen applications
• Range of application specific colour wheel options
• Wide range of projection lenses
• Highly versatile colour management and calibration options
• Built-in real time clock for timed operations
• Sigma Designs™ technology video de-interlacing and processing
• Economy mode for reduced power consumption and prolonged lamp life
• Small and ergonomic footprint, with low weight
• Direct view status monitor and lamp function indicators
• Multiple video and graphics inputs for virtually any video and data source
• Dual Link DVI (330 MHz)
• HDMI ver. 1.3a
• LAN and RS232 for control and monitoring
User’s Guide – Introduction
F35/FL35
user’s guide - Introduction
6
Symbols used in this documentation
WARNING: Used to point out potential danger to people or equipment when using this
product or peripheral equipment.
NOTE: Used to point out essential handling requirements for the projector, which if not
acted on may cause product malfunctioning.
TIP: Used to give advice which benefits the projector usage or conditions related to
projector performance.
The specifications and functionality of this projector may change without prior notice
english
7
www.projectiondesign.com
english
User’s Guide – Introduction
F35/FL35
user’s guide - Introduction
8
2 Safety Instructions
This device complies with safety regulations for Information Technology Equipment for use
in an office environment. Before using the device for the first time, please read the safety
instructions thoroughly.
2.1 SAFETY
This user guide contains important information about safety precautions and the set-up and
use of the projector. Please read the manual carefully before you operate the projector.
2.2 GENERAL WARNINGS
Use only the cables and cords supplied with the projector or original replacement cables.
Using other cables or cords may lead to malfunction and permanent damage of the unit.
Always use 3-prong / grounded power cord to ensure proper grounding of the unit. Never
use 2-prong power cords, as this is dangerous and could lead to electrical shock.
Never open the unit. The projector contains no user serviceable parts. Refer all repairs to
qualified personnel only. Make sure that no objects enter into the vents and openings of the
set.
Do not spill any liquids on the projector or into the vents or openings of the unit.
Always remove lens cap before switching on the projector. If the lens cap is not removed,
it may melt due to the high energy light emitted through the lens. Melting the lens cap may
permanently damage the surface of the projection lens.
Do not look into the projection lens when the projector is switched on. The strong light may
permanently damage sight. Do not look into the laser beam when activated on the remote
control. Laser light may permanently damage sight.
Do not point laser beam at people or animals.
Only place the projector on a stable surface, or mount it securely using an approved ceilingmount.
Do not drop the projector.
Always operate the projector according to the rotation guidelines. Operating the unit
in other positions may reduce lamp life significantly, and may lead to overheating,
resulting in malfunctioning.
Always allow ample airflow through the projector. Never block any of the air vents. Never
cover the unit in any way while running. Allow for sufficient distance to walls and ceilings to
avoid overheating.
Minimum safety distance to any side of the unit is 50 cm / 20” in any direction.
Hot air is exhausted from the rear vent. Do not place objects that are sensitive to heat nearer
than 50cm / 20” to the exhaust vent.
The projector is designed for indoor use only. Never operate the unit outdoors.
Do not operate the projector outside its temperature and humidity specifications, as this may
result in overheating and malfunctioning.
Connecting sources to a powered projector may result in product failure. It is recommended that the power cable connector (projector-end) or the mains power socket
are accessible while the product is in use to enable mains power to be disconnected
or switched off when connecting source devices. This should be considered during
9
product installation.
english
www.projectiondesign.com
english
Only connect the projector to signal sources and voltages as described in the technical
specification. Connecting to unspecified signal sources or voltages may lead to malfunction
and permanent damage of the unit.
In order to prevent damage to the projector caused by overvoltages (e.g. lightning), we recommend connection to a line (mains) circuit which has overvoltage protection.
Allow lamp to cool down before changing. One lamp may be changed while the other lamp
is operating (hot-swap). USE ONLY ORIGINAL LAMPS.
2.2.1 INFORMATION AND WARNING ABOUT POTENTIAL HEALTH ISSUES RELATED TO MERCURY VAPOR (UHP lamps only)
This projector uses a very powerful UHP™ lamp for illumination to produce an extremely
bright image.
This technology is similar to other high-pressure discharge lamps that are extensively used in
cars, street lights and other lighting appliances today. These lamps, like fluorescent lighting,
contain small amounts of mercury. The amount of mercury present in a lamp is far below the
limits of danger. It is very important that lamps containing mercury are treated properly to
minimize potential health hazards.
The UHP™ lamp, like any other high brightness projector lamp, is under high-pressure when
operating. While the lamp and the projector are carefully designed to minimize the probability of lamp rupture, the lamp may break while operating and small amounts of mercury
vapor may be emitted from the projector. The probability of rupture increases when the lamp
reaches its expected lifetime. It is therefore highly recommended that the lamp is replaced
when the rated lifetime is reached.
As a general precaution, secure good ventilation in the room when operating the projector. If
lamp rupture occurs, evacuate the room and secure good ventilation. Children and pregnant
women in particular should leave the room.
When replacing a worn lamp, dispose of the used lamp carefully by proper recycling.
Mercury is a naturally occurring, stable metallic element that may pose a safety risk to people
under certain conditions. According to the Public Health Statement for Mercury published by
the Agency for Toxic Substances and Disease Registry (“ATSDR”, part of the United States
Public Health Service), the brain, central nervous system and kidneys are sensitive to the
effects of mercury, and permanent damage can occur at sufficiently high levels of exposure.
Acute exposure to high concentrations of mercury vapor can cause conditions such as
lung and airway irritation, tightness in the chest, a burning sensation in the lungs, coughing,
nausea, vomiting and diarrhea. Children and fetuses are particularly sensitive to the harmful
effects of metallic mercury to the nervous system.
Seek medical attention if any of the above symptoms are experienced or if other unusual
conditions are experienced following lamp rupture.
2.2.2 HEAVY DUTY AND CONTINOUS USE (UHP lamps only)
2.2.3 SERVICE PERSONNEL INFORMATION WARNING (UHP lamps only)
user’s guide - Safety Instructions
The projector contains moving parts (such as cooling fans) that have limited life-expectancies. When the projector has been used for 8 000 hours, and when the unit is used in
mission-critical applications, it is recommended that the projector is given preventive maintenance by a qualified service person. A message will appear on the screen when the projector
is due for preventive maintenance. This will help ensure long term stable operation.
Use UV radiation eyes and skin protection during servicing.
10User’s Guide - Safety InstructionsF35/FL35
2.2.4 REMOTE CONTROL WARNING
Laser radiation class II product; wavelength 670nm; maximum output 1mW.
Remote control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.
Remote control complies with applicable requirements of EN/IEC 60825-1/2007
Use of controls or adjustments, or performance of procedures other than those
specified in the User Guide, may result in hazardous radiation exposure.
2.2.5 WARNING SYMBOLS
Here is a list of warning symbols found on the product lable(s):
READ USER GUIDE Attention! Read the user guide for further information!
DANGEROUS VOLTAGE Danger! High voltage inside the product!
HOT Warning! Hot surfaces!
WAIT Warning! Wait until cooled down!
MERCURY Warning! Lamp contains mercury! Recycle properly,
do not dispose of in ordinary waste!
UV Warning! UV radiation inside the product!
RECYCLE Warning! Recycle properly, do not dispose of in ordinary waste!
english
2.3 FCC
FCC regulations provide that changes or modifications not expressly approved by the party
responsible manufacturer could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
CANADA
This Class A digital apparatus complies with Canadian ICES-003. / Cet appareil numérique
de la classe A est conforme à la norme NMB- 003 du Canada.
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
11
www.projectiondesign.com
english
2.4 WEEE INFORMATION
This product conforms to all requirements of the EU Directive on waste electrical and electronic equipment (WEEE). This product shall be recycled properly. It can be disassembled to
facilitate proper recycling of it’s individual parts. This product is using projection lamps that
shall be recycled properly. Consult your dealer or relevant public authority regarding drop-off
points for collection of WEEE.
2.5 RECYCLING
This product contains chemicals, including lead, known to the State of California to cause
birth defects or other reproductive harm. Recycle properly, do not dispose of in ordinary
waste!
2.6 SERVICE INFORMATION
This product contains no user serviceable parts. If the product fails to function as expected,
please first check that all connections are properly made, and that the power cord is properly
connected. Please check that the projector as well as the video and computer sources are all
switched on. Cables and cords may break over time. Try to change cables and cords, in case
there is a bad or intermittent connection. Check if the circuit breaker or fuse of your mains
is intact. In the event of product failure, please contact your reseller. You should prepare a
description of the symptoms of failure you experience. Please also state product number and
serial number as printed on the label on the bottom of the projector.
user’s guide - Safety Instructions
12User’s Guide - Safety InstructionsF35/FL35
3 What’s in the box?
The following components are standard delivery:
Projector
Power Cable (Country Dependent)
Remote Control
english
User Documentation
Additional accessories available for the projector:
DVI-cable
Please verify that you have all compoents upon unpacking the unit, and its contents. Check
next page for additional accessories.
Please save packaging materials for future use, should it be necessary to ship the unit.
13
www.projectiondesign.com
english
F35/FL35
User’s Guide - What’s in the Box?
user’s guide - What’s in the Box?
14
4 Getting to know the projector
4.1 Overview
A Lens
B IR sensor
C1 Ventilation - Air flow IN
C2 Ventilation - Air flow OUT
D Lens release
E Power connector
F Keypad
G Connector panel
H LCD
I Lamp lids*
J Adjustable feet
K Security lock
L Ceiling mount
Figure 4-1. - Projector front view
F
AB C D
C1 C1
english
B
E
15
HB G
Figure 4-2. - Projector rear view
J J
Figure 4-3. - Projector bottom view
C2
L
B I
*
K
B
* Features in the user guide pictures/drawings may be
different from your projector depending on model/version.
www.projectiondesign.com
english
4.2 Indicators
System status indicators are located right of the keypad on the back of the projector. Figure
4-4 shows the three status indicators – one for each lamp and one for the system status.
* Pictures show backpanel of projector with UHP lamps.
LED illumination projectors have one indicator lamp (LED), instead of two (LAMP 1, LAMP 2).
Figure 4-4. The lamp indicators
For the lamp indicators the following apply:
- PERMANENT GREEN LIGHT: The lamp is on and operating normally.
- PERMANENT YELLOW LIGHT: The lamp is off. The lamp may be disabled in the menu or
the system is in standby.
- PERMANENT RED LIGHT: Lamp life has expired, lamp is not igniting or lamp door is
open. If the lamp life has expired, please change projection lamp immediately. Failing to
change lamp may lead to lamp explosion. Please replace with original projectiondesign
replacement lamp.
- FLASHING YELLOW LIGHT: The lamp is cooling down. The total cooling down time is
approx. 45 seconds.
- NO LIGHT: No lamp inserted.
The replacement lamps must be purchased from an authorized projectiondesign dealer
for the warranty of the product to be valid. Using lamps from any other after market
supplier will void the warranty.
4.2.1 The status indicator
- PERMANENT GREEN LIGHT: The projector is turned on and in normal operation.
- PERMANENT YELLOW LIGHT: The projector is in standby mode. If the projector was
powered off by the power saving feature (DPMS), it will automatically power on when you
connect a valid source.
- FLASHING YELLOW LIGHT: Please wait. The yellow light will flash a period after power
cord is connected (20-30 sec.), and a period after going to standby mode while lamp is
cooling down (approximately 45 sec.). The projector may not be turned on again until the
light has turned to permanent yellow.
- FLASHING RED LIGHT: Projector is overheated. Turn off immediately! Check if air inlets
are covered or if ambient temperature is outside specifications. The projector cannot be
restarted until the power cord is disconnected and reconnected again. If the projector
continues to flash red, you will need to return the unit for service.
F35/FL35
User’s Guide – Getting to know the projector
user’s guide - Getting to know the projector
16
4.2.2 Keypad
english
The projector has an illuminated keypad on the back of the unit. Figure 4-5 shows the
keypad.
Figure 4-5. Projector keypad
The keypad is used to:
- navigate the menu system
- scroll the information in the LCD panel
- directly select input sources
- enter pin code (if enabled)
- power on/off
- adjust basic image functions
The keypad is illuminated for operation in dark environments. Available functions are
illuminated in yellow while selected (active) functions are illuminated in green. Functions that
are not available are not illuminated.
4.2.3 Remote control
The remote control allows flexible access to the projector settings, either through direct keys,
or through the menu system. The remote control is backlit for use in dark environments.
It also has a data-jack that allows for wired connection to the projector. When the wire is
connected, the IR (infra-red) beam and internal batteries are switched off.
The direct sources buttons for VGA1, VGA2, X-Port 2 and YPbPr are not
available for all versions of the product. If your product does not have these inputs
implemented the OSD will display “not available” when pressing these buttons.
* Pictures show backpanel of projector with UHP lamps.
LED illumination projectors have one indicator lamp (LED), instead of two (LAMP 1, LAMP 2).
Do not look into the laser beam when activated on the remote
control. Laser light may permanently damage eyesight. Avoid
pointing the laser beam at people or animals.
Only use the supplied remote control, otherwise the result may
be malfunction.
17
Figure 4-6. Remote control
www.projectiondesign.com
Loading...