Banner Tubular Fluorescent Lights User Manual

HFFW.. High-Frequency Tubular Fluorescent Lighting

0 115387 3

Sealed fluorescent lights, 8" to 48" tube lengths, ac and dc powered

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com

• Electronic ballast increases lamp frequency and eliminates strobe effect

• Models available with built-in or external ballast. External ballast models provide
shorter, more compact light housing.

• Ideal for illuminating hard-to-reach areas

• Parabolic louver extends the full length of the light opening; reduces glare.

• All models include built-in mounting brackets and a 2.5 m (8') integral cable

• Acrylic tube and strain-relief cable gland for use in wet environments

• IEC IP67 enclosure rating, exceeds NEMA 4X

Built-in ballast models shown

WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This product does NOT include the self-checking redundant circuitry neces-

sary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition.

Models

Model Bulb

Length

HFFW8DC 8"

HFFW12DC 12" 24 W

HFFW14DC 14" 36 W

HFFW8AC110 8"

HFFW15AC110 15" 120V ac 36 W

HFFW12AC 12"

HFFW24AC 24" 17 W

HFFW36AC 36" 25 W

HFFW48AC 48" 32 W

HFFW8AC230 8" 100–230V ac 18 W

HFFW15AC230 15" 230V ac 36 W

HFFW8ACR 8"

HFFW12ACR 12" 24 W

HFFW15ACR 15" 36 W

HFFW24ACR 24" 17 W

Ballast Type Connection Supply Voltage Bulb Wat-

tage

18 W

Built-In Elec­tronic Ballast

External Bal-

last

3-conductor, 2.5 m (8') integral cable, untermi­nated

3-conductor, 2.5 m (8') integral cable with
male plug

3-conductor, 2.5 m (8') integral cable, untermi­nated (light to ballast) plus 3-conductor, 2.5 m
(8') cable with male 3-prong plug (ballast to
power source) See wiring.

24V dc

100–120V ac 18 W

24 W

120–277V ac

18 W

120–277V ac

P/N 115387 rev. D 9/7/2012

HFFW.. High-Frequency Tubular Fluorescent Lighting

Model Bulb

Length

HFFW36ACR 36" 25 W

HFFW48ACR 48" 32 W

Ballast Type Connection Supply Voltage Bulb Wat-

tage

Dimensions

Figure 1. Dimensions for Models with Lamps 24 inches and Longer

Models with Lamps Up to 15 Inches Long

Light Model Light Opening L1 Distance Between Mounting Holes L2 Overall Length L3

HFFW8DC

HFFW8AC110

HFFW8AC230 468 mm (18.4") 480 mm (18.9")

HFFW12DC 318 mm (12.5") 620 mm (24.4") 632 mm (24.9")

HFFW12AC 315 mm (12.4") 700 mm (27.6") 712 mm (28.0")

HFFW14DC 363 mm (14.3") 727 mm (28.6") 739 mm (29.1")

HFFW15AC110 363 mm (14.3") 808 mm (31.8") 820 mm (32.3")

HFFW15AC230 363 mm (14.3") 854 mm (33.6") 866 mm (34.1")

HFFW8ACR 198 mm (7.8") 388 mm (15.3") 400 mm (15.8")

HFFW12ACR 293 mm (11.5") 467 mm (18.4") 479 mm (18.9")

HFFW15ACR 393 mm (15.5") 546 mm (21.5") 558 mm (22.0")

198 mm (7.8")

Models with Lamps 24 Inches and Longer

501 mm (19.7") 513 mm (20.2")

Light Model Light Opening L1 Distance Between Mounting Holes L2 Overall Length L3

HFFW24AC 604 mm (23.8") 1019 mm (40.1") 1031 mm (40.6")

HFFW36AC 909 mm (35.8") 1324 mm (52.1") 1336 mm (52.6")

HFFW48AC 1214 mm (47.8") 1644 mm (64.7") 1656 mm (65.2")

2 www.bannerengineering.com - tel: [phone] P/N 115387 rev. D

Lamp Ballast

Blue Blue

Brown

Green/Yellow Green/Yellow

Black/White

White

AC
Power

(connect to
ballast housing)

(connect to

ballast housing)

Red

-8

-16

-8

0

8

16

5

10

15

20

25

-16

0

8

16

inches

E[fc]

0

-16 -8

8

16

0

-16

-8

8

16

inches

16

18

20

E[fc]

-8

-16

-8

0

8

16

5

10

15

20

25

-16

0

8

16

inches

E[fc]

0

-16 -8

8

16

0

-16

-8

8

16

inches

25

27.5

30

E[fc]

22.5

HFFW.. High-Frequency Tubular Fluorescent Lighting

Models with Lamps 24 Inches and Longer

Light Model Light Opening L1 Distance Between Mounting Holes L2 Overall Length L3

HFFW24ACR 605 mm (23.8") 773 mm (30.5") 785 mm (30.9")

HFFW36ACR 909 mm (35.8") 1080 mm (42.5") 1092 mm (43.0")

HFFW48ACR 1214 mm (47.8") 1384 mm (54.5") 1396 mm (55.0")

Wiring

External Ballast Models Only — See dimension drawings for wiring of built-in ballast models.

Beam Patterns

3D View Top View 3D View Top View

14-inch and 15-inch Models 24-inch Models

3D View Top View 3D View Top View

8-inch Models 12-inch Models

P/N 115387 rev. D www.bannerengineering.com - tel: [phone]

-8

-16

-8

0

8

16

-16

0

8

16

inches

E[fc]

10

20

30

40

50

0

-16 -8

8

16

0

-16

-8

8

16

inches

35

40

45

E[fc]

-8

-16

-8

0

8

16

5

10

15

20

25

-16

0

8

16

inches

E[fc]

0

-16 -8

8

16

0

-16

-8

8

16

16

18

20

22

inches

E[fc]

-8

-16

-8

0

8

16

-16

0

8

16

inches

E[fc]

5

10

15

20

25

30

35

0

-16 -8

8

16

0

-16

-8

8

16

inches

26

E[fc]

24

25

-8

-16

-8

0

8

16

10

20

30

40

50

-16

0

8

16

inches

E[fc]

0

-16 -8

8

16

0

-16

-8

8

16

inches

E[fc]

30

32.5

35

HFFW.. High-Frequency Tubular Fluorescent Lighting

14-inch and 15-inch Models 24-inch Models

36-inch Models 48-inch Models

3D View Top View 3D View Top View

Mounting height for all views: 20 inches.

Replacement Parts

Light Model Replacement Bulb Replacement Housing

Model Length Model Length

HFFW8DC

HFFTA18.5 18.5"

HFFW8AC110

HFFLW8 8"

HFFW8AC230 HFFTA17.2 17.2"

HFFW8ACR HFFTA14.2 14.2"

HFFW12DC

HFFW12AC HFFTA26.4 26.4"

HFFLW12 12"

HFFTA23.3 23.3"

HFFW12ACR HFFTA17.3 17.3"

HFFW14DC

HFFTA27.5 27.5"

HFFW15AC110 HFFTA30.7 30.7"

HFFLW15 15"

HFFW15AC230 HFFTA32.5 32.5"

HFFW15ACR HFFTA20.4 20.4"

HFFW24AC HFFLW24 24" HFFTA38.9 38.9"

4 www.bannerengineering.com - tel: [phone] P/N 115387 rev. D

Light Model Replacement Bulb Replacement Housing

HFFW24ACR HFFTA29.3 29.3"

HFFW.. High-Frequency Tubular Fluorescent Lighting

Model Length Model Length

HFFW36AC

HFFLW36 36"

HFFW36ACR HFFTA41.4 41.4"

HFFW48AC

HFFLW48 48"

HFFW48ACR HFFTA53.4 53.4"

HFFTA50.9 50.9"

HFFTA63 63.0"

Accessory Mounting Brackets

All HFFW... Series Lights have built-in end-cap mounting brackets. If they are not used, these accessory mounting brackets are required
for mounting the lights.

• Heavy-duty, bright zinc-coated steel construction

• Two brackets required per light

Model Description Product

SMBWFTLS Straight

SMBWFTLR Right-angle

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN­CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN­SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR­RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.