Banner RSD1QP, RSD1 Quick Start Manual
Output A
LED Indicator
Power
LED Indicator
Output B
LED Indicator
Display
Push Buttons
RSD1 Remote Display
199622
Quick Start Guide
Remote Display and Configuration Tool
To view or download the latest technical information about this product, including specifications, dimensions, accessories, and
wiring, see
sensor, reference the sensor specific literature.
Models
Model Output A and B Connection
RSD1QP Configurable Integral 150 mm (6 in) PVC cable with 5-pin M12/Euro-style quick disconnect
www.bannerengineering.com
. Search 199621 to view the Instruction Manual. To check RSD1 compatibility with a
• Allows for configuration of remote sensor heads
• Easy to set up and use with a 2-line, 8-character display
• Ability to display live distance measurement
• Ability to save up to 6 unique configurations
• Not required for continuous operation of configured sensor(s)
Overview
The RSD1 remote display is designed to provide easy sensor configuration and monitoring with the ability to copy settings between
sensors.
Features and Indicators
Three LED indicators on the RSD1 provide ongoing
indication of the connected sensor status.
Output A LED Indicator
Solid Amber = Output A On
Off = Output A Off
Power LED Indicator
Solid Green = Normal Operation, Power On
Output B LED Indicator
Solid Amber = Output B On
Figure 1. RSD1 Display Features
RSD1 Buttons
Use the RSD1 buttons Down, Up, Enter, and Escape to view or change RSD1 settings and information and to program a
connected sensor.
Down and Up Buttons
Press Down and Up to:
• Navigate the menu systems
• Change programming settings
When navigating the menu systems, the menu items loop.
Press Down and Up to change setting values. Press and hold the buttons to cycle through numeric values. After
changing a setting value, the value slowly flashes until the change is saved using the Enter button.
Off = Output B Off
Original Document
199622 Rev. B
4 September 2018
3
1
4
5
shield
2
+
12–30 V dc
D1_Out
D2_Out
Input
−
Load
NPN
PNP
* User-configurable PNP/NPN setting
Load
or
shield
+
12-30V dc
D_Out
A_Out
Input
–
Load
* User-configurable PNP/NPN setting
4-20 mA
3
1
2
4
5
NPN
or
PNP
shield
+
12-30V dc
D_Out
A_Out
Input
–
Load
* User-configurable PNP/NPN setting
3
1
2
4
5
NPN
or
PNP
0-10V
RSD1 Remote Display
Enter Button
Press Enter to:
• Confirm selection
• Save changes
In the RSD1 Menu, a check mark in the lower right corner of the display indicates that pressing Enter accesses a
submenu.
Press Enter to save changes. New values flash rapidly, and the sensor returns to the parent menu.
Escape Button
Press and hold Escape for 4 seconds to:
• Access the RSD1 Menu while in Run mode
Press Escape to:
• Leave the current menu and return to the parent menu
Important: Pressing Escape discards any unsaved programming changes.
In the RSD1 Menu, a return arrow in the upper left corner of the display indicates that pressing Escape returns to the
parent menu.
Press and hold Escape for 2 seconds to return to Run mode from the RSD1 Menu.
Programming a Sensor with the RSD1
When connected to a sensor and in Run Mode, the RSD1 mirrors the connected sensor's display. Program a sensor using the
buttons on the RSD1.
For sensor programming information, reference the literature
For more information on the options available in each RSD1 menu, reference the Instruction Manual (199621).
In addition to programming a connected sensor, the RSD1 buttons can be disabled to prevent unauthorized or accidental
programming changes. See the Instruction Manual for more information.
specific to the connected sensor.
Wiring Diagrams
The following wiring diagrams are examples of different RSD1 outputs. Wiring is dependent on the sensor connected to the
RSD1.
Dual Discrete
Note: When connecting a 5-pin sensors to the RSD1, a double-ended 5-pin to 5-pin cordset is optional.
When connecting a 4-pin sensor to the RSD1, a double-ended 4-pin to 5-pin adapter cordset is required.
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 199622 Rev. B
Discrete Analog (Current)
Discrete Analog (Voltage)
Loading...