Banner QS30H20 User Manual
®
QS30H2O
WORLD-BEAM
Opposed-Mode Water Sensors
Reliable liquid detection
in WORLD-BEAM®
housing
Detect water and water-based
liquids inside containers
▶
Fluid filled IV bags
▶
HDPE milk containers
▶
Clear glass test tubes
▶
Colored PET beverage
bottles
▶
Etched or frosted glass
containers
▶
Liquid point level in
sight glass
▶
Thin walled PFA/FEP tubes
▶
Nozzle spray verification
High-power, infrared sensor for reliable
detection of water and water-based liquids
The WORLD-BEAM® QS30H2O Sensor uses a 1450 nm sensing beam to burn through many types
of thin-walled glass and plastic containers, creating contrast for reliable liquid detection. The
QS30H2O Sensor is an innovative addition to Banner’s complete line of cost-effective, rugged and
powerful WORLD-BEAM photoelectric sensors.
Liquid detection for challenging clear or translucent plastic or glass containers
▶
Emits light that water-based liquids will
attenuate, enhancing contrast in
challenging low-contrast applications
▶
Burns through many plastic and glass
containers
▶
Detects water-based liquids including
liquor, beer, shampoos, conditioners,
lotions and sauces
▶
Penetrates many labels (material thickness
and type dependent)
▶
Features WORLD-BEAM QS30 housing
with popular 30 mm threaded lens and
side mount
▶
Specified ranges of up to 4 m
(longer range possible)
▶
Offers built-in electronic crosstalk avoidance
▶
Resists harsh environments with rugged IP67
(NEMA 6) housing and encapsulated electronics
▶
Rated PW12 (1200 psi washdown)
▶
Offers choice of 10 to 30V dc operation with
bipolar, NPN (sinking) and PNP (soucing) output
or 15 to 30V dc with analog (0-10V) output
▶
Delivers highly visible power and output
status indicators
▶
Includes accessory apertures to attenuate
or shape the beam
Versatile models
to meet demanding
requirements
▶
Robust housing with
30 mm threaded barrel
and integrated side mount
▶
Receivers with a choice of outputs
and range
•
Models with bipolar NPN/PNP output
and 2 m range
•
High-gain models with bipolar
NPN/PNP output and 4 m range
•
Analog (0-10V) output with 4 m range
▶
Light operate (LO) or dark operate (DO),
depending on model (discrete only)
▶
Operating temperature from -20° to 60° C
▶
Large output status indicator on back
of receiver
▶
Bright LED status indicators on sensor top
▶
2 m or 9 m attached cable or 5-pin Euro-style
pigtail quick-disconnect
www.bannerengineering.com
1.888.373.6767
bannerengineering.com
®
WORLD-BEAM
Sensing Mode Models* Range
QS30EXH2O
QS30EXH2OQ5 5-pin Euro Pigtail QD
QS30ARH2O
QS30ARH2OQ5 5-pin Euro Pigtail QD
QS30RRH2O 2 m
OPPOSED
WATER DETECTION
Opposed
(Effective Beam: 13 mm)
1450 nm infrared
* For 9 m cable, add suffix W/30 to the 2 m model number (example, QS30EXH2O W/30).
A model with a QD connector requires a mating cordset.
†
Sensors can be used at ranges greater than listed for applications that require less excess gain. Please contact the factory for assistance on
your long-range applications.
QS30RRH2OQ5 5-pin Euro Pigtail QD
QS30ARXH2O
QS30ARXH2OQ5 5-pin Euro Pigtail QD
QS30RRXH2O 2 m
QS30RRXH2OQ5 5-pin Euro Pigtail QD
QS30RXH2OU
QS30RXH2OUQ5 5-pin Euro Pigtail QD
QS30H2O Models
†
—
2 m
4 m
4 m
Cable
2 m
2 m
2 m
2 m
Supply
Voltage
10 to 30V dc
10 to 30V dc
15 to 30V dc
Output
—
Bipolar
NPN/PNP
LO
Bipolar
NPN/PNP
DO
Bipolar
NPN/PNP
LO
Bipolar
NPN/PNP
DO
0-10V
Analog
Quick-Disconnect (QD) Cordsets
Style Model
5-pin
Euro-style,
straight
MQDC1-506
MQDC1-515
MQDC1-530
Length Dimensions
2 m
5 m
9 m
44 mm
max.
ø 15 mm
M12 x 1
Female Pinout
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
1
4
Data
Sheet
136166
Dimensions
22 mm
44 mm
iKnow
®
Online
51.5 mm
Training & Tutorials
A complete resource for tutorials, product
questions and answers— and the mechanics
and theory behind sensor technology available
online at www.bannerengineering.com
Q: Why does the sensor burn through
some materials but not others?
Q: Does the color of the container matter?
Q: Is there a certain percentage of
water necessary?
Q: Can I use this sensor to tell the
percentage of water content?
2
3
5
Q: Does the color of the liquid matter?
Q: Can I control the gain on this sensor?
Go online for answers to these questions or
to pose your own!
Brackets
Models Description
• Right-angle bracket for cabled sensors
• 14-ga. stainless steel
• ±12˚ tilt adjustment
SMBQS30L
SMBQS30LT
SMBQS30Y
SMB30SC
Banner Engineering Corp.
• Clearance for M4 (#8) hardware
• Tall right-angle bracket for QD sensors with straight cordset connectors
• 14-ga. stainless steel
• ± 8˚ tilt adjustment
• Heavy-duty die-cast bracket with M18 vertical mounting option
• ± 8˚ tilt adjustment for cabled sensors
• Nuts and lockwasher included
• Swivel bracket with 30 mm mounting hole for sensor
• Black reinforced thermoplastic polyester
• Stainless steel mounting and swivel locking hardware included
www.bannerengineering.com
Opposed-Mode Apertures
Aperture Model Description
Circular hole
Horizontal slot
Vertical slot
NOTE: The use of apertures will reduce the excess gain.
9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • (763) 544-3164 • Fax: (763) 544-3213
Toll-free: 888-373-6767 • www.bannerengineering.com • Email: sensors@bannerengineering.com
P/N 141524
APQS30-040 1 mm dia. - 6 each
AP QS 30-100 2.5 mm dia. - 6 each
APQS30-200 5 mm dia. - 6 each
APQ30-040H 1 x 12 mm dia. - 6 each
AP QS 30-100H 2.5 x 12 mm dia. - 6 each
APQS30-200H 5 x 12 mm dia. - 6 each
APQ30-040V 1 x 17 mm dia. - 6 each
AP Q30-100V 2.5 x 17 mm dia. - 6 each
APQ30-200V 5 x 17 mm dia. - 6 each
APQS30-DVHX2 Kit (two of each) -18 total
Kit
APQS30-DVH
Kit (included with each emitter/receiver)
containing one each of aperture models:
APQS30-040, APQS30-040H,
APQS30-040V
Loading...