Banner PresencePLUS Interface Modules User Manual
PSC-24 Power Supplies (24 Volt)
Features
• 24V dc power supply delivers up to 2.2 amps
• Designed to power Banner model SCM strobe control module (see data sheet
p/n 67448)
• Choose model with 120V ac North American power cord, or with 220V ac Euro
power cord
• Tough ABS housing
PSC-24 Models
Input
Models Input
†
PSC-24
PSC-24E
†
†
Environmental Rating IEC IP20; NEMA 1
Operating Conditions Temperature: 0° to 40°C (+32° to 104°F)
These models are not stocked and are non-returnable.
100-250V ac
50/60 Hz
1.0A (RMS) for 120V ac
0.5 A (RMS) for 240V ac
Maximum relative humidity: 95% at 40°C (non-condensing)
80.0 mm
(3.15")
54.0 mm
(2.13")
Cord Output
North America
(NEMA 5-15)
Cont. Europe
(Schuko CEE 7)
24V dc ±5%
with voltage
regulation of ±1%
2.2 A max.
165.0 mm
(6.50")
Output
Cable Used with
1.8 m (6')
2-wire cable
(no connector)
SCM
Strobe Control
Module
1.8 m
(6.0')
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA 05/01 P/N 67446
Banner Engineering Corp., 9714 Tenth Ave. No., Mpls., MN 55441 • Ph: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
Loading...