Banner K50L Independent Push Button Contact User Manual

QPMA
E
U
R
O
-
S
T
Y
L
E
P
I
G
T
A
I
L
P
U
R
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
EZ-LIGHT Indicators — Daylight Visible
0 137330 7
DC-Operated Indicators for Outdoor Applications
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com.
• Intense levels of light output for outdoor applications
• Controlled field of view for signage and narrow lane use
• May also be used for low-cost vision sensor illumination
• Rugged, cost-effective and easy to install
• Compact devices are completely self-contained — no controller needed
• Immune to ambient light, EMI and RFI interference
• 50 mm diameter with flat profile and 30 mm mounting base
• PNP (sourcing) or NPN (sinking) input type, depending on model
• 15 to 30V dc operation
Contact Factory for more information
Models
NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness levels
(see Sun Shield on page 4).
Model* LED Function** Inputs‡
K50LDGRYPQ 3 Color:
K50LDGRYNQ NPN
Green, Red, Yellow
K50LDGRBPQ 3 Color:
K50LDGRBNQ NPN
Green, Red, Blue
PNP
PNP
Model* LED Function** Inputs‡
K50LDXGXPQ 1 Color: Green PNP/NPN
K50LDXRXPQ 1 Color: Red PNP/NPN
K50LDXYXPQ 1 Color: Yellow PNP/NPN
K50LDXWXPQ 1 Color: White PNP/NPN
K50LDXBXPQ 1 Color: Blue PNP/NPN
* Integral QD models only are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LDGRYPQP).
• For 2 m (6.5’) cable, omit suffix Q from model number (example, K50LDGRYP).
• A model with a QD requires a mating cable (see 4-Pin Euro-Style Cordsets on page 4).
** 3-color models: 6 LEDs per color 1-color models: 18 LEDs per color
Contact factory for other colors and color combinations.
‡ 1-color models are PNP/NPN selectable, depending on hookup.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener­gized sensor output condition.
P/N 137330 rev. B 3/22/2011
EZ-LIGHT Indicators — Daylight Visible
Specifications
Supply Voltage and Current
15 to 30V dc @ 120 mA max. (1-color models) 15 to 30V dc @ 40 mA max. per LED color (3-color
models) NOTE: 12V dc minimum voltage to -20°C for both
models
Supply Protection Circuitry
Protected against reverse polarity and transient voltag­es
Indicators
LED colors are independently selected, depending on model
Input Response Time
Indicator ON/OFF: 1 ms max.
Environmental Rating
Fully encapsulated, rated IEC IP67
Construction
Base and covers: polycarbonate
Connections
Integral 4-pin Euro-style QD, 150 mm PVC pigtail with QD, or 2 m (6.5') integral cable, depending on model
Operating Conditions
−40° to +50° C (−40° to +122° F) 90% @ 55º C max. relative humidity (non-condensing)
Certifications
Percent of Maximum Intensity vs Viewing Angle
X: Viewing Angle (Deg)
Y: Intensity (Percent)
2 www.bannerengineering.com - tel: 763-544-3164 P/N 137330 rev. B
49.5 mm (1.95")
M12 X 1
M30 X 1.5 (mounting nut included) max. torque 4.5 Nm (40 in-lbf)
Ø50 mm (1.97")
13 mm (0.51")
11 mm (0.43")
20 mm (0.79")
Internal Threads ½- 14 NPSM max. torque 2.25 Nm (20 in-lbf)
3
1
2
4
15-30V dc
X
X
C
1
3
2
4
15-30V dc
X
X
C
3
4
1
2
Indicator
Color
15-30V dc
G
R
Y
B
or
1
4
3
2
Indicator
Color
R
Y
G
15-30V dc
B
or
EZ-LIGHT Indicators — Daylight Visible
Dimensions
Wiring – 1-Color Models
Sourcing (PNP) Input Sinking (NPN) Input Key:
1 = Brown
2 = White
3 = Blue
4 = Black
C = Indicator Color (Green, Red, Yellow, White or Blue)
X = Not Used
NOTE: 1-color models are PNP/NPN selectable
Wiring – 3-Color Models
P/N 137330 rev. B www.bannerengineering.com - tel: 763-544-3164 3
Sourcing (PNP) Input Sinking (NPN) Input Key:
1 = Brown
2 = White
3 = Blue
4 = Black
G = Green
R = Red
Y = Yellow
B = Blue
EZ-LIGHT Indicators — Daylight Visible
4-Pin Euro-Style Cordsets
4-Pin M12/Euro-Style Cordsets (straight connector)
MQDC-406, 2 m (6.5')
MQDC-415, 5 m (15')
MQDC-430, 9 m (30')
4-Pin M12/Euro-Style Cordsets (right-angle connector)
MQDC-406RA, 2 m (6.5')
MQDC-415RA, 5 m (15')
MQDC-430RA, 9 m (30')
Sun Shield
K50DS
• Use for enhanced visibility in desert sun brightness levels
• Thermoplastic polyester
Accessory Mounting Brackets
For more information about these and other available brackets, visit www.bannerengineering.com.
30 mm brackets mount to base of light:
• SMB30A
• SMBAMS30RA
• SMBAMS30P
• SMB30SC
• SMB30MM
• SMB3018SC
Contact Us
For more information: Contact your local Banner representative or Banner Corporate Offices around the world.
Corporate Headquarters: Banner Engineering Corp. 9714 Tenth Ave. North, Mpls., MN 55441, Tel: 763-544-3164, www.bannerengin-
eering.com, sensors@bannerengineering.com
Europe: Banner Engineering Europe Park Lane, Culliganlaan 2F, Diegem B-1831 BELGIUM,Tel: 32-2 456 07 80, Fax: 32-2 456 07 89,
www.bannereurope.com, mail@bannereurope.com
Latin America: Contact Banner Engineering Corp. (US) or e-mail Mexico: mexico@bannerengineering.com; or Brazil: brasil@banner-
engineering.com
Asia:
Banner Engineering China Shanghai Rep Office Rm. G/H/I, 28th Flr. Cross Region Plaza No. 899, Lingling Road, Shanghai 200030
CHINA, Tel: 86-21-54894500, Fax: 86-21-54894511, www.bannerengineering.com.cn, sensors@bannerengineering.com.cn
Banner Engineering Japan Cent-Urban Building 305 3-23-15, Nishi-Nakajima Yodogawa-Ku, Osaka 532-0011 JAPAN, Tel: 81-6-6309-0411, Fax: 81-6-6309-0416, www.bannerengineering.co.jp, mail@bannerengineering.co.jp
Banner Engineering Asia ─ Taiwan Neihu Technology Park 5F-1, No. 51, Lane 35, Jihu Rd., Taipei 114 TAIWAN, Tel: 886-2-8751-9966, Fax: 886-2-8751-2966, www.bannerengineering.com.tw, info@bannerengineering.com.tw
Banner Engineering India Pune Head Quarters Office, No. 1001 Sai Capital, Opp. ICC Senapati Bapat Road, Pune 411016 INDIA, Tel: 91-20-66405624, Fax: 91-20-66405623, www.bannerengineering.co.in, india@bannerengineering.com
Warranty: Banner Engineering Corporation warrants its products to be free from defects
for a period of one year. Banner Engineering Corporation will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to
the factory during the warranty period. This warranty does not cover damage or liability
for the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.
Loading...