Banner K50FL Sensor Emulator EZ-LIGHT User Manual

EZ-LIGHT™ 2-Color Indicators for Use with Sensors

0 121900 1

DC-Operated LED Indicators

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com.

Models* Inputs

T8LGYX7PQP PNP

T8LGYX7NQP NPN

• Polycarbonate/ABS alloy housing,
thermoplastic diffuser

• IP67

M18GYX7PQ PNP

M18GYX7NQ NPN

• Nickel-plated brass housing, thermo­plastic diffuser

• Fully encapsulated IP67

T18GYX7PQ PNP

T18GYX7NQ NPN

• Thermoplastic polyester housing, ther­moplastic diffuser

• Fully encapsulated IP67

T30GYX7PQ PNP

Models* Inputs

K30LGYX7PQ PNP

K30LGYX7NQ NPN

• 22 mm threaded polycarbonate base,
translucent polycarbonate dome

• Fully encapsulated IP67, IP69K

K50LGYX7PQ PNP

K50LGYX7NQ NPN

• 30 mm threaded polycarbonate base,
translucent polycarbonate dome

• Fully encapsulated IP67, IP69K

K50FLGYX7PQ PNP

K50FLGYX7NQ NPN

• Polycarbonate base, translucent poly­carbonate dome

• Fully encapsulated IP67, IP69K

K80LGYX7PQ PNP

T30GYX7NQ NPN

• Thermoplastic polyester housing, ther­moplastic diffuser

• Fully encapsulated IP67

* A QD model requires a mating cable; see 4-Pin Euro-Style Cordsets on page 3.

T8L Models: Standard pigtail QD models are listed. For integral 4-wire cable model, omit suffix QP (example, T8LGYX7P).

K80L Models: Standard 4-pin Euro integral QD connector models are listed. For terminal-wired model, omit suffix Q (example,
K80LGYX7P).

Other Models: Standard 4-pin Euro integral QD connector models are listed. For 2 m (6.5') integral 4-wire cable model, omit suffix Q

(example, M18GYX7P). For 150 mm (6") PVC pigtail with 4-pin Euro connector, replace suffix Q with QP (example, M18GYX7PQP).

Contact Factory for other colors/color combinations, including: blue, white, orange.

WARNING: Not To Be Used for Personnel Protection

Never use this product as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow
its use in personnel safety applications. A sensor failure or malfunction can cause either an energized
or de-energized sensor output condition.

K80LGYX7NQ NPN

• ABS and polycarbonate base, translu­cent polycarbonate dome

• Electronics fully encapsulated IP67

P/N 121900 rev. G 3/10/2011

ø16.3 mm

(0.64")

8.8 mm (0.35")

150 mm (6")
Euro-style PVC Pigtail

19.1 mm (0.75")

15. 8 mm (0.62")

M8 X 1

Ø 15 mm

(0.59")

M18 x 1
Thread

33.0 mm
(1.3")

53.6 mm
(2.11")

M12 X 1

30 mm

(1.2")

23 mm

(0.9")

Ø16.5 mm
(0.65")

61 mm

(2.4")

M12 X 1

M18 X 1

M30 x 1.5

Thread

Ø 40.0 mm

(1.57")

45.0 mm
(1.77")

63.7 mm
(2.51")

Ø 15 mm

(0.59")

M12 X 1

31.0 mm
(1.22")

58.0 mm
(2.28")

30.0 mm (1.18")

16.0 mm (0.63")

M12 X 1

Max. Torque

2.25 Nm (20 in-lbf)

M22 X 1.5

50.0 mm
(1.97")

38 mm (1.50")*

20 mm (0.79")

11 mm (0.43")

M30 x 1.5

(mounting nut

included)

Internal Threads

½ - 14 NPSM

Max. Torque 4.5 Nm

(40 in-lbf)

Max. Torque 2.25 Nm

(20 in-lbf)

EZ-LIGHT™ 2-Color Indicators for Use with Sensors

Specifications

Supply Voltage and Current

T8L models: 10 to 30V dc @ 20 mA max.
T18, M18, and K30L models: 10 to 30V dc @ 30 mA

max.
T30 models: 10 to 30V dc @ 45 mA max.
K50L, K50FL, and K80L models: 18 to 30V dc @ 45

mA max.

Indicators

Entire translucent diffuser or dome provides indication.
Green and Yellow, when connected to discrete output
of 3-wire or 4-wire sensors. For other colors, contact
Factory for availability.

Input Response Time

Indicator ON/OFF: 1 ms max.

Construction

See Models table.

Dimensions

Connections

K80L models: 4-pin Euro-style integral QD (Q)stand­ard; terminal-wired models available for use with bulk
cable; compression fitting optional. Contact Factory for
cable information.

Other models: 4-pin Euro-style integral QD (Q), 6" pig­tail QD (QP), or 4-wire, 2 m (6.5') integral cable, de­pending on model

Environmental Rating

Rated IEC IP67. T8L not encapsulated; K80L has en­capsulated electronics only; other models fully encap­sulated. K30L, K50L, and K50FL QD models meet
IP69K, per DIN 40050-9. Cabled models also meet
IP69K if the cable and cable entrance are protected
from high-pressure spray.

Operating Conditions

−40° to +50° C (−40° to +122° F)

Certifications

All models: CE; K30L and K50L models: UL

T8L Models T18 Models M18 Models

T30 Models K30L Models K50L Models

2 www.bannerengineering.com - tel: [phone] P/N 121900 rev. G

K50FL Models K80L Models

60.0

[2.36"]

35.0

[1.38"]

16.0 [0.63"]

40.0 [1.58"]

2x 5.0 [0.20"]

2x 5.0 [0.20"]

2x 5.5 [0.21"]

Ø50 [1.97"]

17.0 [0.67"]

44.6 [1.76"]

109.5 mm
(4.31")

80.8 mm
(3.18")

66.3 mm
(2.61")

26.0 mm
(1.02")

M12 X 1

65.0 mm
(2.56")

65.0 mm
(2.56")

4X 8–32 UNC

Max. Torque 1.12 Nm (10 in–lbf)

4X Ø 5.5 mm (Ø 0.22")

Max. Torque 1.12 Nm (10 in–lbf)

with supplied screws

Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)

2

3

4

1

EZ-LIGHT™ 2-Color Indicators for Use with Sensors

Wiring

NPN Models PNP Models Wiring Key:

1 = Brown

2 = White

3 = Blue

4 = Black

*Yellow ON = Green OFF

** This object represents the sensor

4-Pin Euro-Style Cordsets

4-Pin M12/Euro-Style Cordsets (straight connector)

MQDC-406, 2 m (6.5')

MQDC-415, 5 m (15')

MQDC-430, 9 m (30')

Legend

T.C. = To Controller

Y = Yellow

G = Green

X = Not Used

4-Pin M12/Euro-Style Cordsets (right-angle connector)

MQDC-406RA, 2 m (6.5')

MQDC-415RA, 5 m (15')

MQDC-430RA, 9 m (30')

Pinout

P/N 121900 rev. G www.bannerengineering.com - tel: [phone]

EZ-LIGHT™ 2-Color Indicators for Use with Sensors

4-Pin Euro-Style Double-Ended Quick-Disconnect (QD) Cordsets

4-pin Euro-Style Male Straight/ Female

Straight Connectors

MQDEC-403SS
MQDEC-406SS
MQDEC-412SS
MQDEC-420SS
MQDEC-430SS
MQDEC-450SS

4-pin Euro-Style Male Right-Angle/Female

Straight Connectors

MQDEC-403RS
MQDEC-406RS
MQDEC-412RS
MQDEC-420RS
MQDEC-430RS
MQDEC-450RS

4-Pin Euro-Style Quick-Disconnect (QD) Splitter Cordsets

Model Branch Length/ Connector Trunk Length/ Connector

CSB-M1240M1240 2 x 10 mm (0.4") / female 10 mm (0.4") / male

CSB-M1241M1241
CSB-M1248M1241
CSB-M12415M1241
CSB-M12425M1241
CSB-UNT425M1241

2 x 0.3 m (1') / female

0.3 m (1') / male

2.5 m (8') / male
5 m (15') / male
8 m (26') / male
8 m (26') / unterminated

Length

1 m (3')
2 m (6.5')
4 m (12')
7 m (23')
10 m (33')
15 m (50')

Contact Us

For more information: Contact your local Banner representative or Banner Corporate Offices around the world.

Corporate Headquarters: Banner Engineering Corp. 9714 Tenth Ave. North, Mpls., MN 55441, Tel: [phone], www.bannerengin-

eering.com, [e-mail]

Europe: Banner Engineering Europe Park Lane, Culliganlaan 2F, Diegem B-1831 BELGIUM,Tel: [phone], Fax: [phone],

www.bannereurope.com, [e-mail]

Latin America: Contact Banner Engineering Corp. (US) or e-mail Mexico: [e-mail]; or Brazil: brasil@banner-

engineering.com

Asia:

Banner Engineering China Shanghai Rep Office Rm. G/H/I, 28th Flr. Cross Region Plaza No. 899, Lingling Road, Shanghai 200030

CHINA, Tel: [phone], Fax: [phone], www.bannerengineering.com.cn, [e-mail]

Banner Engineering Japan Cent-Urban Building 305 3-23-15, Nishi-Nakajima Yodogawa-Ku, Osaka 532-0011 JAPAN, Tel:
81-6-6309-0411, Fax: [phone], www.bannerengineering.co.jp, [e-mail]

Banner Engineering Asia ─ Taiwan Neihu Technology Park 5F-1, No. 51, Lane 35, Jihu Rd., Taipei 114 TAIWAN, Tel:
886-2-8751-9966, Fax: [phone], www.bannerengineering.com.tw, [e-mail]

Banner Engineering India Pune Head Quarters Office, No. 1001 Sai Capital, Opp. ICC Senapati Bapat Road, Pune 411016 INDIA, Tel:
91-20-66405624, Fax: [phone], www.bannerengineering.co.in, [e-mail]

Warranty: Banner Engineering Corporation warrants its products to be free from defects

for a period of one year. Banner Engineering Corporation will repair or replace, free of

charge, any product of its manufacture found to be defective at the time it is returned to

the factory during the warranty period. This warranty does not cover damage or liability

for the improper application of Banner products. This warranty is in lieu of any other

warranty either expressed or implied.