Banner K50FL General Purpose EZ-LIGHT User Manual

EZ-LIGHT

0 130865 5

™ One-Color General-Purpose Indicators

DC-Operated LED Indicators with One Color

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com

Models

Models* LED Color**

T8LGXXPQP Green

T8LXRXPQP Red

T8LXXYPQP Yellow

• Polycarbonate/ABS alloy housing,
thermoplastic diffuser.

• IP67

M18GXXPQ Green

M18XRXPQ Red

M18XXYPQ Yellow

• Nickel-plated brass housing, thermo­plastic diffuser.

• Fully encapsulated IP67

T18GXXPQ Green

T18XRXPQ Red

T18XXYPQ Yellow

• Thermoplastic polyester housing, ther­moplastic diffuser.

• Fully encapsulated IP67

Models* LED Color**

K30LGXXPQ Green

K30LXRXPQ Red

K30LXXYPQ Yellow

• 22 mm threaded polycarbonate base,
translucent polycarbonate dome.

• Fully encapsulated IP67, IP69K

K50LGXXPQ Green

K50LXRXPQ Red

K50LXXYPQ Yellow

• 30 mm threaded polycarbonate base,
translucent polycarbonate dome.

• Fully encapsulated IP67, IP69K

K50FLGXXPQ Green

K50FLXRXPQ Red

K50FLXXYPQ Yellow

• Polycarbonate base, translucent poly­carbonate dome.

• Fully encapsulated IP67, IP69K

T30GXXPQ Green

T30XRXPQ Red

T30XXYPQ Yellow

• Thermoplastic polyester housing, ther­moplastic diffuser.

• Fully encapsulated IP67

* A QD model requires a mating cable; see 4-Pin Euro-Style Cordsets on page 4.

T8L Models: Standard pigtail QD models are listed. For integral 4-wire cable model, omit suffix QP (example, T8LGXXP).

K80L Models: Standard 4-pin Euro integral QD connector models are listed. For terminal-wired model, omit suffix Q (example,
K80LGXXP).

Other Models: Standard 4-pin Euro integral QD connector models are listed. For 2 m (6.5') integral 4-wire cable model, omit suffix Q

(example, M18GXXP). For 150 mm (6") PVC pigtail with 4-pin Euro connector, replace suffix Q with QP (example, M18GXXPQP).

** Contact Factory for other colors/color combinations, including: blue, white, orange.

P/N 130865 rev. D 3/10/2011

K80LGXXPQ Green

K80LXRXPQ Red

K80LXXYPQ Yellow

• ABS and polycarbonate base, translu­cent polycarbonate dome.

• Electronics fully encapsulated IP67

ø16.3 mm

(0.64")

8.8 mm (0.35")

150 mm (6")
Euro-style PVC Pigtail

19.1 mm (0.75")

15. 8 mm (0.62")

M8 X 1

Ø 15 mm

(0.59")

M18 x 1
Thread

33.0 mm
(1.3")

53.6 mm
(2.11")

M12 X 1

30 mm

(1.2")

23 mm

(0.9")

Ø16.5 mm
(0.65")

61 mm

(2.4")

M12 X 1

M18 X 1

M30 x 1.5

Thread

Ø 40.0 mm

(1.57")

45.0 mm
(1.77")

63.7 mm
(2.51")

Ø 15 mm

(0.59")

M12 X 1

31.0 mm
(1.22")

58.0 mm
(2.28")

30.0 mm (1.18")

16.0 mm (0.63")

M12 X 1

Max. Torque

2.25 Nm (20 in-lbf)

M22 X 1.5

50.0 mm
(1.97")

38 mm (1.50")*

20 mm (0.79")

11 mm (0.43")

M30 x 1.5

(mounting nut

included)

Internal Threads

½ - 14 NPSM

Max. Torque 4.5 Nm

(40 in-lbf)

Max. Torque 2.25 Nm

(20 in-lbf)

60.0

[2.36"]

35.0

[1.38"]

16.0 [0.63"]

40.0 [1.58"]

2x 5.0 [0.20"]

2x 5.0 [0.20"]

2x 5.5 [0.21"]

Ø50 [1.97"]

17.0 [0.67"]

44.6 [1.76"]

109.5 mm
(4.31")

80.8 mm
(3.18")

66.3 mm
(2.61")

26.0 mm
(1.02")

M12 X 1

65.0 mm
(2.56")

65.0 mm
(2.56")

4X 8–32 UNC

Max. Torque 1.12 Nm (10 in–lbf)

4X Ø 5.5 mm (Ø 0.22")

Max. Torque 1.12 Nm (10 in–lbf)

with supplied screws

Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)

EZ-LIGHT™ One-Color General-Purpose Indicators

WARNING: Not To Be Used for Personnel Protection

Never use this product as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow
its use in personnel safety applications. A sensor failure or malfunction can cause either an energized
or de-energized sensor output condition.

Dimensions

T8L Models T18 Models M18 Models

T30 Models K30L Models K50L Models

K50FL Models K80L Models

2 www.bannerengineering.com - tel: [phone] P/N 130865 rev. D

EZ-LIGHT™ One-Color General-Purpose Indicators

Specifications

Supply Voltage and Current

T8L models: 5 to 30V dc @ 20 mA max.
T18, M18, and K30L models: 10 to 30V dc @ 25 mA

max.
T30 models: 10 to 30V dc @ 40 mA max.
K50L, K50FL, and K80L models: 18 to 30V dc @ 50

mA max.

Indicators

Entire translucent diffuser or dome provides indication.
Green, Red, or Yellow LED, depending on model. For
other colors, contact Factory for availability.

Input Response Time

Indicator ON/OFF: 1 ms max.

Construction

See Models table.

Wiring

For NPN Operation

Connections

K80L models: 4-pin Euro-style integral QD (Q)stand­ard; terminal-wired models available for use with bulk
cable; compression fitting optional. Contact Factory for
cable information.

Other models: 4-pin Euro-style integral QD (Q), 6" pig­tail QD (QP), or 4-wire, 2 m (6.5') integral cable, de­pending on model

Environmental Rating

Rated IEC IP67. T8L not encapsulated; K80L has en­capsulated electronics only; other models fully encap­sulated. K30L, K50L, and K50FL QD models meet
IP69K, per DIN 40050-9. Cabled models also meet
IP69K if the cable and cable entrance are protected
from high-pressure spray.

Operating Conditions

−40° to +50° C (−40° to +122° F)

Certifications

All models meet CE; K30L and K50L models also meet
UL

Green LED Red LED Yellow LED

Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used

For PNP Operation

Green LED Red LED Yellow LED

Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used

Wiring Key:

1 = Brown

2 = White

3 = Blue

4 = Black

P/N 130865 rev. D www.bannerengineering.com - tel: [phone]

EZ-LIGHT™ One-Color General-Purpose Indicators

4-Pin Euro-Style Cordsets

4-Pin M12/Euro-Style Cordsets (straight connector)

MQDC-406, 2 m (6.5')

MQDC-415, 5 m (15')

MQDC-430, 9 m (30')

4-Pin M12/Euro-Style Cordsets (right-angle connector)

MQDC-406RA, 2 m (6.5')

MQDC-415RA, 5 m (15')

MQDC-430RA, 9 m (30')

Accessory Mounting Brackets

For more information about these and other available brackets, visit www.bannerengineering.com.

K50FL models include a 48 mm (1.9") circular hook-and-loop mounting kit for easy mounting with no additional hardware required.

For use with T8L models:
SMB8MM

For use with M18 and T18 mod­els or base-mount T30 models:

• SMB18A

• SMB1815SF

• SMB18Q

• SMB18SF

• SMB312PD

• SMBAMS18RA

For use with T30 models or
base-mount K50L models:

• SMB30A

• SMBAMS30RA

• SMBAMS30P

• SMB30SC

• SMB30MM

• SMB3018SC

DIN-mount bracket for K80L
models:

SMBDX80D

• SMBAMS18P

Contact Us

For more information: Contact your local Banner representative or Banner Corporate Offices around the world.

Corporate Headquarters: Banner Engineering Corp. 9714 Tenth Ave. North, Mpls., MN 55441, Tel: [phone], www.bannerengin-

eering.com, [e-mail]

Europe: Banner Engineering Europe Park Lane, Culliganlaan 2F, Diegem B-1831 BELGIUM,Tel: [phone], Fax: [phone],

www.bannereurope.com, [e-mail]

Latin America: Contact Banner Engineering Corp. (US) or e-mail Mexico: [e-mail]; or Brazil: brasil@banner-

engineering.com

Asia:

Banner Engineering China Shanghai Rep Office Rm. G/H/I, 28th Flr. Cross Region Plaza No. 899, Lingling Road, Shanghai 200030

CHINA, Tel: [phone], Fax: [phone], www.bannerengineering.com.cn, [e-mail]

Banner Engineering Japan Cent-Urban Building 305 3-23-15, Nishi-Nakajima Yodogawa-Ku, Osaka 532-0011 JAPAN, Tel:
81-6-6309-0411, Fax: [phone], www.bannerengineering.co.jp, [e-mail]

Banner Engineering Asia ─ Taiwan Neihu Technology Park 5F-1, No. 51, Lane 35, Jihu Rd., Taipei 114 TAIWAN, Tel:
886-2-8751-9966, Fax: [phone], www.bannerengineering.com.tw, [e-mail]

Banner Engineering India Pune Head Quarters Office, No. 1001 Sai Capital, Opp. ICC Senapati Bapat Road, Pune 411016 INDIA, Tel:
91-20-66405624, Fax: [phone], www.bannerengineering.co.in, [e-mail]

Warranty: Banner Engineering Corporation warrants its products to be free from defects

for a period of one year. Banner Engineering Corporation will repair or replace, free of

charge, any product of its manufacture found to be defective at the time it is returned to

the factory during the warranty period. This warranty does not cover damage or liability

for the improper application of Banner products. This warranty is in lieu of any other

warranty either expressed or implied.