Banner IP68 User Manual
®
PresencePLUS Pro™
Vision Sensor
Easy system to set up and
operate:
• Use PC for simple point-andclick step-by-step setup
• PC not required for operation,
live video built in
• Inspections are stored in the
system
Perform multiple inspec-
tions simultaneously:
• Nine full-function vision
inspection tools
• Not dependent on product
alignment or orientation
Ethernet & flexible I/O
• Communicate measure
ment, location, and system
process control data
• Up to six configurable
inputs & outputs
• Easy selection of stored
inspections
-
E-A016 04/05
PresencePlus Pro™ Inspection Tools:
Locate
Pattern Find
Grey Scale
Blob Pattern Count
Edge
Object
Measure
Test
PC Display
Tablet Package Verification
PresencePLUS Pro verifies a tablet is present in
each blister, and that no broken tablets or foreign
material are in the package.
Bad Good
Good Bad
Label positioning
PresencePLUS Pro verifies the correct label
placement on a bottle.
GAP (PITCH) Measurement
PresencePLUS Pro inspects stamped metal pins
for critical flaws.
Banner Engineering offers the industry a highly
complete and integrated line of photoelectric
sensors, ultrasonic sensors, machine safety
products, measurement & inspection products
and vision sensors.
Banner Engineering is a US based company
with subsidiaries around the world for global
sales and support.
Banner Engineering Europe
Koning Albert 1 laan, 50
1780 Wemmel • Belgium
Phone: +32 2 456 07 80
Fax: +32 2 456 07 89
e-mail: mail@bannereurope.com
www.bannereurope.com
Multiple Component Location
PresencePLUS Pro verifies the presence and
location of foam padding and plastic nuts on an
automobile dashboard trim piece.
®
E-A016
04/05
Loading...