B and K DT-1 Owners manual

B&K Components, Ltd. 2100 Old Union Road Buffalo, New York 14227

Table of contents

Safety precautions page 2
Front panel view page 3
Front panel description page 3
Back panel view page 4
Back panel description page 4 - 5
Description of operation page 5

Auto select mode page 5
AC-3 demodulator only mode page 6
Figure 1 page 6
Changing mode page 6

Connections page 7

Dolby Digital RF page 7
Coax digital page 7
Toslink digital page 7
Main output page 7

Figure 2 page 8
Troubleshooting page 8
Warranty page 9

Accessories included: Power cord and manual

Page 1

SAFETY PRECAUTIONS

PLEASE READ BEFORE INSTALLING

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.

The lightning flash wit h arrow head, within an equilateral tri angle, is intended to alert the
user of the presence of uninsulated “dangerous voltage
that may be sufficient magnitude t o const itute a risk of electric shock to you.

The exclamation point withi n an equi l ateral triangle is intended to al ert the user of the
presence of important operating and maintenance ( servi cing) instructions in the
literature accompanying the unit.

Caution: To prevent the risk of electric shock, do not remove cover. Ref er servi ci ng t o
qualified service personnel.

” within the product’s enclosure











Turn demodulator ‘off’ (remove the power cable) when plugging in or unplugging source

cables!!!

The DT-1 is equipped with raised feet so that continuous ventilation can be maintained.

They also help to reduce acoustic feedback into t he pr eam plifier and provide a measure

of protection against scrat ching any surface the unit might be resting on. Do not alter

or remove them.

Do not stack anything on top of the demodulator (processor, source, et c) .

Do not stack the DT-1 on top of an amplifier.

Always connect the DT-1 power cord to an unswitched AC outlet for normal oper at ions.

Page 2