B and K CK-1.1 Owners manual

GUIDE TO INSTALLATION

B&K

CK1.1 K

EYPAD

Rev A 0505

Thank you for choosing to install the B&K CK 1.1

Keypad for this system!

Please use this manual as a guide to connecting and mounting the Keypad.

The CK1.1 keypad is preprogrammed at the factory to initially operate

B&K CT products. It can be re-programmed using a Windows PC and the

accompanying CD. See the Keypad Programming Manual on the CD for

instructions on programming.

B&K Components, Ltd. sells its products through authorized dealers.
Buying from an authorized B&K Components, Ltd. dealer insures that you
have a FACTORY WARRANTY on your B& K Components, Ltd. product. A
warranty on B&K Components, Ltd. products is NOT VALID if the products
have been purchased from an unauthorized dealer or an E-tailer or if the
factory serial number has been removed, defaced or replaced in any way.

Guide to Installation of the B&K CK1.1 Keypad

© 2005 B&K Components, Ltd. All rights reserved.

B&K Components, Ltd.

2100 Old Union Road

Buffalo, New York 14227

1.800.543.5252 In NY: 716.656.0023
Fax: [phone]

E-mail: [e-mail]

On the web: www.bkcomp.com

Table of Contents

Table of Contents
Features and Benefits 1
Basic Controls and Displays 2
Rear Panel Connections 3
Programming Jack - Behind the Faceplate 4
Terminate RJ-45’s One to One 4
Standard CT Receiver System 5
Connecting To A CT Receiver 6
Keypad Total Power Consumption 7
Single Gang Mounting 7
The B & K REF 5 Preamp Perfect for Adding Zones 8
Keypads with other B & K Receivers and Preamps 8
No Emitter Needed for B & K Receivers and Preamps 9
Connecting Slave Keypads 9
Controlling A Local TV or Device 10
Using IR “Eyes” with the CK1.1 11
Programming 11
White and Beige Wall Plate Included 12
CK1.1 Keypad Dimensions Front, Back, Side 12
Specifications Back

Page 1

Features and Benefits

Programming Capacity

The CK1.1 can be programmed with up to 20 IR commands or macros.
The ON and OFF buttons can additionally be programmed with a command
or macro. The soft button labels can be customized so the commands or
macros will display user friendly names that your client will find easy to use.

One Touch Automates Operation

The On, Off and all of the soft buttons can be programmed with macros of
up to 190 steps (steps can include IR commands or delays of .1 to 30 sec­onds).

Point Any Remote Control at the Keypad!

The integrated IR pass through allows commands from infrared remotes to
pass through to the back panel and on to other sources using emitters. The
sensor can be disabled using the programming software.

Control Local TV’s and the Central System

!

By connecting a flasher directly to the Keypad, you can program the IR
commands and Macros to control TV’s and other components placed in the
zone.

Two Way Communication With B&K Multi-Zone Receivers

The keypad displays the status of the zone it controls in two ways:

1. The green status LED indicates when the zone is on or off.

2. The keypad will display the current zone status when the backlight but­ton is pressed. The zone status will scroll through the current parame­ters such as volume, source and audio information.

Multiple Keypads within One Zone

You can daisy-chain keypads within one zone. All keypads will correctly dis­play the zone power status.

Ultra-Fast Programming via PC Software

A vast database of more than one thousand brands instantly programs IR
Codes for most components, B&K Batch Learning does the rest in a frac­tion of the time of any other system.

Retains Programming Through Power Failures

Your programming is safe in the event of a power failure of any length. The
Non-Volatile Flash Memory keeps the program intact.

Page 2

Basic Controls and Displays

Volume/Mute
Buttons

control the audio
level.

Power LED

Lights up
when this
Zone/Room
is ON.

LCD Buttons - Labels on the Screen change depending on what activity

has been selected.

Backlight Button

lights the keypad dis­play & recalls status
feedback of the CT
Receiver on the bot­tom line of the display.

Remote Control Target

conceals an IR Sensor which relays com­mands from a hand held IR remote to
control the main system and components
connected to flashers.

Soft Buttons

Drag and drop any
command or macro
from a CK1.2 key­pad program over to
the CK1.1.

Page Button

cycles through the 4
pages of commands
or macros.