Baldor RM3155A Product Information Sheet

Product Information Packet

RM3155A

2HP,3450RPM,3PH,60HZ,56/56H,3428M,OPEN

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RM3155A - 2HP,3450RPM,3PH,60HZ,56/56H,3428M,OPEN

Part Detail

Revision: S Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WG5900 CD Diagram: CD0007 Mfg Plant:
Mech. Spec: 34-5809 Layout: 34LY5809 Poles: 02 Created Date:
Base: RS Eff. Date: 04-16-2012 Leads: 12#18

Specs

Catalog Number: RM3155A
Frame: 56/56H
Frame Material: Steel
Output @ Frequency: 2.000 HP @ 60 HZ
Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
Voltage @ Frequency: 460.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: CSA

UR
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 6.400 A @ 208.0 V

5.400 A @ 230.0 V

Inverter Code: Not Inverter
KVA Code: H
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 12 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: Flying Leads
Motor Type: 3428M
Mounting Arrangement: F1
Power Factor: 84
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

2.700 A @ 460.0 V

Shaft Rotation: Reversible

Page 2 of 9

Product Information Packet: RM3155A - 2HP,3450RPM,3PH,60HZ,56/56H,3428M,OPEN

Design Code: B
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB

Page 3 of 9