Baldor RL1323A Product Information Sheet

Product Information Packet

RL1323A

.5HP,1725RPM,1PH,60HZ,56,3416L,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RL1323A - .5HP,1725RPM,1PH,60HZ,56,3416L,OPEN,F1

Part Detail

Revision: AA Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGW140 CD Diagram: CD0052 Mfg Plant:
Mech. Spec: 34K018 Layout: 34LYK018 Poles: 04 Created Date:
Base: RS Eff. Date: 10-12-2019 Leads: 6#18,1#16 #1TH

Specs

Catalog Number: RL1323A
Enclosure: OPEN
Frame: 56
Frame Material: Steel
Output @ Frequency: .500 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ

230.0 V @ 60 HZ
XP Class and Group: None
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None

Inverter Code: Not Inverter
KVA Code: J
Lifting Lugs: No Lifting Lugs
Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 6 @ 18 AWG
Motor Lead Exit: Terminal Panel
Motor Lead Termination: Flying Leads
Motor Type: 3416L
Mounting Arrangement: F1
Power Factor: 71
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding

Current @ Voltage: 4.000 A @ 230.0 V

Shaft Rotation: Reversible: Connected Standard

Page 2 of 10

Product Information Packet: RL1323A - .5HP,1725RPM,1PH,60HZ,56,3416L,OPEN,F1

8.000 A @ 115.0 V
Design Code: N
Drip Cover: No Drip Cover
Duty Rating: CONT
Electrically Isolated Bearing: Not Electrically Isolated
Feedback Device: NO FEEDBACK
Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B

Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10