Bacharach H-10 PRO Specifications

H-10 PRO

Refrigerant Leak Detector

FEATURES & BENEFITS

• Detects all CFC, HFC and HCFC refrigerants as low as 0.006 oz/yr, including R-410a
and R-507

• Dual power options allow battery operation for the best mobility or wall power for
uninterrupted usage

• Visual and audible indicators include an incremental ashing LED in the probe tip,

an internal speaker and a headphone jack

ULTRA-SENSITIVE UNIVERSAL REFRIGERANT LEAK DETECTOR

The H-10 PRO is a highly responsive universal refrigerant leak detector using Bacharach’s
tried-and-true heated diode sensor technology. It’s ultra-sensitive to all halogen-based,

non-ammable CFC, HFC and HCFC refrigerants for reliable use in a wide range of

refrigerant leak detection applications.

The H-10 PRO has a long probe (4.5 ft./1.4 m) for detecting leaks in hard-to-reach areas,
visual and audible indicators to show relative leak sizes and an auto-zeroing feature

(automatic mode only) for nding leaks in backgrounds where target gas is present. It has

an internal sensor calibration reference to ensure optimum performance and comes with
a 3 year warranty.

mybacharach.com

ORDERING INFORMATION

PART NO. DESCRIPTION

3015- 8004

3015- 8005

H-10 PRO with shoulder strap, spare lters, wall adapter/charger with N.

American plug and instruction manual

H-10 PRO with shoulder strap, spare lters, wall adapter/charger with N.
American, European, UK and Australian plugs and instruction manual

TECHNICAL DATA

COMMERCIAL REFRIGERATIONRESIDENTIAL

PRODUCT ATTRIBUTES DESCRIPTION

Refrigerants Detected

Sensitivity

[2]

Response Time 1 second

Leak Indicators Visual (red LED in probe tip) and audible (via internal speaker or headphones)

Automatic Background Adjustment Yes, in automatic mode

Power 12 VDC internal rechargeable batter y or via 100-240 VAC wall adapter/charger

Run Time 3 hours (t ypical) on fully-charged battery

Recharging Time 3-4 hours with wall adapter (included)

Dimensions Unit: 8.3 x 10.5 x 5.4 in. (21.1 x 26.7 x 13.7 cm)

Weight 5.1 lbs. (2.3 kg)

Sensor Type Heated diode

Sensor Life

[3]

Flow Rate 90 cc/min @ small setting (typical)

Operating Conditions 32 to 104 °F (0 to 40 °C ), 10 to 90% RH (non-condensing), 1 ATM

Warm-up Time 2 minutes (approximate)

Approvals CE mark

Warranty 3 years (does not include sensor, lters, refrerence leak bottle, battery or probe)

[1]

DO NOT use this device to detect for leaks of refrigerants which are rated as combustible/ammable gases (e.g., ASHR AE A2- or A3-rated

refrigerants).

[2]

Sensitivity for R-12, R-22, R-124a, R-410A, R-404A and R-507 when unit is set to small leak setting, manual mode.

[3]

Based on normal use. Consistent and/or constant exposure to high levels of refrigerant will deteriorate the sensor life more quickly. Increasing

the sensor heater will also impac t sensor life.

[1]

All CFC, HFC and HCFC refrigerants, including but not limited to: R-12, R-22, R-134a, R-404A, R-410A,
R-502, R-507, HFO-1233zd, HFO-1234yf and HFO-1234ze

0.006 oz/yr (stationary)

0.1 oz/yr (moving per SAE J2791)

Probe: 4.5 ft. (1.37 m)

1 year (typical)

ACCESSORIES AND PARTS

MKTG 00013 | Rev0 | 1612 | Subjec t to modica tion s | © 2016 Bacharach Inc

PART NUMBER DESCRIPTION

3015-0119 100-240 VAC wall adapter, N. American and international plugs

3015 -5812 100-240 VAC wall adapter, N. American plug

3015- 0326 Flexible probe extension (14 in. / 35.6 cm)

3015- 0 486 Replacement sensor

3015- 0781 Tune-up kit (sensor, 100 lters, 3 air ow balls, 3 rubber probe tips, and calibration bottle)

3015- 0 864 Replacement calibration reference bottle

3015- 0 895 Battery clamps with cigaret te adapter (allows H-10 PRO to be operated from a car battery)

0028-0002 Headphones (w/ volume control)

New Kensington, PA USA | Dublin, Ireland | Toronto, Canada
mybacharach.com | [e-mail]