Baby Trend LX 7392 LX, LX 7381 LX, LX 7374 LX, LX 7348 LX, LX 7318 LX User Manual

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Model #: 7311 LX, 7315 LX, 7318 LX, 7348 LX, 7374 LX, 7381 LX, 7392 LX

Sit N Stand LX Tandem Stroller

with Car Seat Snap N Go Attachment System

US PATENT #5,664,795

Instruction Manual

Convenience through innovation and thoughtful design

Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.

05.07

WARNING: Please follow all of these instructions to ensure the

WARNINGS

safety of your child. Keep these instructions for future reference.

WARNING: Failure to follow these instructions could result in

serious injury or death. Avoid serious injury from falling or sliding out.

Always use the safety belts and insure that the children are properly

positioned according to these instructions.

WARNING: Never leave children unattended.

* Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and

cause a hazardous, unstable condition.

* The maximum weight that can be carried in the storage basket is 5 lbs. The maximum weight that can be carried

in the Parent Tray is 3 lbs. Excessive weight may cause a hazardous unstable condition to exist.

* Be certain the stroller is completly opened and locked in place before allowing a child near the stroller.

* The rear stand on platform is designed for a child who is at least 2 1/2 years old and is not over 40 inches tall.

Use of the stroller with two (2) children weighing more than 40 pounds each, or children totaling more than
80 pounds, will cause excessive wear and stress on the stroller and may cause a hazardous unstable
condition to exist.

* DO NOT use the stroller on stairways or escalators.
* Never allow your stroller to be used as a toy.

* To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.
* Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or
repair parts as needed.
* Discontinue use of stroller should it malfunction or become damaged. Please contact our customer service

department to arrange for repair or obtain replacement parts.

Please: If you experience any difficulty with the use of our product or have a question regarding these instructions,
please contact our Customer Service Department at [phone] between the hours of 8:00 am and 4:30 pm
Pacific Standard Time or visit us online at www.babytrend.com. Please do not return to the store as once it is
returned it cannot be resold and the materials and energy used to make it are wasted.

To contact us:

Baby Trend, Inc. Parts Hotline:
1567 S. Campus Ave. [phone]
Ontario, CA 91761 8:00 am and 4:30 pm Pacific Standard Time

2

Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.

Snap On

Push

Down

PARTS

ASSEMBLING

Child Tray

Foot Rest

Canopy

Front Wheels

Stroller

Rear Wheels

Parent Tray

Snap N Go Attachment

TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW

THESE INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR

FUTURE REFERENCE.

ASSEMBLY

1. Remove stroller from box. The front wheels, rear wheels, child tray, and
canopy need to be installed prior to use.

2. To attach the front wheels, unfold stroller as described in the section
following. Fig. 1. Lean the stroller backwards so that it rests on the
handle and rear frame tubes and the front wheel tubes are pointing
upward. Position the front wheel assembly at the front tube such that
the large hole in the swivel assembly will slide onto the front tube. Push
each front wheel assembly onto the front tube being careful that wheel
assembly locks onto the front leg. Pull on the wheel assembly to ensure
that it is securely attached to the stroller. Fig. 2.

3. Lean the stroller forward to rest on the front wheels. To attach the rear
wheels, position the rear axle and wheel assembly such that the brake
levers are facing to the rear of the stroller. Press the rear wheel assembly
onto the rear frame tubes being careful that the push buttons on the
forward side of each rear tube engage the hole on the forward side of
each rear wheel housing. Pull on the rear wheel assembly to ensure that
it is securely attached to the stroller. Fig. 3.

4. Ensure that the wheels are firmly locked into place. Do Not use the
stroller if the wheels are not locked into place, but rather contact our
customer service department immediately at [phone], between
the hours of 8:00am and 4:30pm PST, for assistance.

5. Snap footrest onto front legs of stroller just below the seat. Push
downward on the footrest until it locks onto the rivets protruding from
both sides of each leg and snaps onto the U-shaped frame cross member.
Fig. 4.

Fig. 1.

Fig. 2.

Fig. 3.

Fig. 4.

3

Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.