Baby Lock Palette PTS Instruction Manual

Palette PTS (PES Transfer System)

Software Update for Palette PTS Version 1.0
Added: 07/14/2003

Software Update for Palette PTS (PES Transfer System)

If you use Palette PTS, an update is now available to download to improve the performance of
the program.

Important Information For Windows 2000 Users:

If you have Windows 2000 with S
you are about to install S
update Palette PTS with the latest driver to prevent system lock-up.

This update is available via the Baby Lock Web site (http://www.babylock.com)

After installing the driver update, your system will be ready for the PTS update.

ERVICE PACK 3 or SERVICE PACK 4, please ensure that you

1. The device driver for USB Reader/Writer Box has been updated to improve its performance.

2. The installation of Palette PTS corresponds to this new device driver for USB Reader/Writer
Box.

ERVICE PACK 3 or SERVICE PACK 4 on your PC or if

Before applying this “Update”, please uninstall
your PC. This “Update” will install all program files for Palette PTS (PES Transfer System).

Instructions for download

Follow the instructions below before downloading the update.

1. Make a temporary folder (ex: C:\Temp) on your PC.

2. Visit the Baby Lock Web page (http://www.babylock.com), locating the Palette 5.02 update.
Click the “DOWNLOAD NOW” link at the bottom of the page.

3. Select the temporary folder. (ex: C:\Temp)

4. Download the file.

How to update your Palette PTS (PES Transfer System)

1. Un-install the Palette PTS that is currently installed on your PC.

2. Disconnect the USB Card Reader/Writer from your PC.

3. Double-click on the downloaded file “PTSDriverUp.exe in Windows Explorer. Or go to Start

menu on Task bar, select Run and type in “PTSDriverUp.exe” file name, then click on OK. The
update process will automatically start.

4. Follow the instructions and proceed through the update process.

5. After the installation process finishes, re-connect the USB Card

Reader/Writer box to your PC.

For Windows 98, Windows Me, Windows 2000 users

6. The Hardware Wizard will be launched, automatically. To install the new device driver for

the USB Reader/Writer Box, please specify the temporary folder (ex. C:\Temp) where the
downloaded files are located.

the Palette PTS that is currently installed on