Aztech S 201-0816 Oem Integrator Manual
tel: (613) 384-9400
www.aztechinc.com
805 Bayridge Dr. Kingston, Ontario, Canada K7P 1T5
OEM Integrator Manual
Model: S 201-0816
Feb 28, 2013
The S 201-0816 is a commercial. It is designed to operate in the 902MHz – 928 MHz frequency band.
The module contains a separate radio microcontroller, flash storage, and arm processor, with the
intention of connecting the AMI network for smart meter monitoring.
Powering Up the Module
To power the S 201-0816 plug in a 5 volt USB power supply into the micro USB connector as shown
below.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and,
2. This device must accept any interference received, including interference that may cause
undesired operation.
Integrator Documentation Requirements - FCC Radiation Exposure Statement
The following statement must be visible on the end device or in the manual for the end device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a distance of at least 20 cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Loading...