Axis Communications M3006-V User Manual

Installation Guide

AXIS M3006-V Network Camera

About this Document

This document includes instructions
for installing AXIS M3006-V on your
network. Previous experience of
networking will be beneficial when
installing the product.

Legal Considerations

Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes. This
product includes one (1) H.264
decoder license. To purchase further
licenses, contact your reseller.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla,
Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java­based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM
Implementers Corporation.

Electromagnetic Compatibility
(EMC)

This equipment has been designed and
tested to fulfill applicable standards
for:

• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.

• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.

USA - This equipment has been

tested using a shielded network cable
(STP) and found to comply with the

limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.

• Consult the dealer or an experienced
radio/TV technician for help.

Canada - This Class B digital

apparatus complies with Canadian
ICES-003.

Europe - This digital equipment

fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
This product fulfills the requirements
for immunity according to EN 61000­6-1 residential, commercial and light­industrial environments.
This product fulfills the requirements
for immunity according to EN 61000­6-2 industrial environments.
This product fulfills the requirements

for immunity according to EN 55024

。

し

信

す
扱

residential and commercial
environments.

Australia

This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of
AS/NZS CISPR 22.

Japan -

この装置は、クラスB 情報技術装置です
この装置は、家庭環境で使用することを目 的と
いますが、この装置がラジオやテレビジョン受
に近接して使用されると、 受信障害を引き起こ
とがあります。 取扱説明書に従って正しい取り
をして下さい。

Safety

This product complies to
EN/IEC 60950-1, Safety of Information
Technology Equipment.

Equipment Modifications

This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.

Liability

Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis
Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and documentation without prior
notice. Axis Communications AB
makes no warranty of any kind with
regard to the material contained
within this document, including, but
not limited to, the implied warranties
of merchantability and fitness for a
particular purpose. Axis

Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or
use of this material. This product is
only to be used for its intended
purpose.

RoHS

This product complies with
both the European RoHS
directive, 2002/95/EC, and the
Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has
enacted a Directive 2002/96/
EC on Waste Electrical and
Electronic Equipment (WEEE
Directive). This directive is
applicable in the European Union
member states.
The WEEE marking on this product (see
right) or its documentation indicates
that the product must not be disposed
of together with household waste. To
prevent possible harm to human
health and/or the environment, the
product must be disposed of in an
approved and environmentally safe
recycling process. For further
information on how to dispose of this
product correctly, contact the product
supplier, or the local authority
responsible for waste disposal in your
area.
Business users should contact the
product supplier for information on
how to dispose of this product
correctly. This product should not be
mixed with other commercial waste.

Support

Should you require any technical
assistance, please contact your Axis

reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:

• download user documentation and

firmware updates

• find answers to resolved problems in

the FAQ database. Search by
product, category, or phrases

• report problems to Axis support by

logging in to your private support
area.

Battery Replacement

This Axis product uses a 3.0 V CR2032
lithium battery as the power supply for
its internal real-time clock (RTC).
Under normal conditions this battery
will last for a minimum of 5 years. Low
battery power affects the operation of
the RTC, causing it to reset at every
power-up. A log message will appear
when the battery needs replacing. The
battery should not be replaced unless
required!

If the battery does need replacing,
please contact www.axis.com/techsup
for assistance.

• Dispose of used batteries according

to the manufacturer's instructions.

• Risk of explosion if battery is

incorrectly replaced.

• Replace only with the same or

equivalent battery, as recommended
by the manufacturer.

Dome Cover Cleaning

• Be careful not to scratch or damage
the dome cover. Do not clean a dome
cover that looks clean to the eye and
never polish the surface. Excessive
cleaning could damage the surface.

• For general cleaning of a dome cover
it is recommended to use a non­abrasive, solvent-free neutral soap
or detergent with water and a soft
cloth. Rinse well with clean
lukewarm water. Dry with a soft
cloth to prevent water spotting.

• Never use harsh detergents, gasoline,
benzene or acetone etc. and avoid
cleaning in direct sunlight or at
elevated temperatures.

AXIS M3006-V Page 5

Horizontal

1x 1x 1x 1x

1x

1x

1x 1x 2x

1x

Page 6 AXIS M3006-V

1

2