Axis PrintPoint IP 560, 560, 660, PrintPoint IP100, PrintPoint 560 Quick Installation Manual
...
BACK TO AXIS ONLINE
English
Quick Installation Guide
for
AXIS PrintPoint 1P 560/100,
AXIS PrintPoint 560/100,
AXIS 560 and AXIS 660
Fast Ethernet, Ethernet and Token Ring
Print Servers for
NetWare • Windows • LANtastic
• OS/2 • UNIX • Macintosh
• Web Management
Quick Installation Guide
AXIS 5 60/
660 0
This guide covers the installation and basic setup procedures for the
AXIS 560/660 - see note right. If you need more detailed instructions,
please refer to the AXIS 560/660 User’s Manual.
Physical Description
Network Indicator
Power Indicator
AXIS PrintPoint 1P 5 60/100 Fast E thernet N etwork P rint Server
COM1
Printer
Connector
Network Indicator
Power Indicator
AXIS PrintPoint 560/100 Fast Ethernet Network Pri nt Server
LPT1 Printer
Connector
LPT1 Printer
Connector
LPT1 Printer
Connector
LPT2 Printer
Connector
LPT2 Printer
Connector
External Power
Supply Connector
Ethernet/
10baseT
Fast Ethernet/
100baseTX
Connector
Test Button
External Power
Supply Connector
Ethernet/
10baseT
Fast Ethernet/
100baseTX
Connector
Test Button
External Power
Supply Connector
COM1
Printer
Connector
Network Indi cator
Power Indicator
COM1
Printe r
Connector
Network Indica tor
Power Indicator
Ethernet/
10base2
Connector
Ethernet/
10baseT
Connector
Test Button
AXIS 560 Ethernet Network Print Server
LPT1 Printer
Connector
AXIS 660 Token Ring Network Print Server
LPT2 Printer
Connector
External Power
Supply Connector
Token Ring/
STP
Connector
Token Ring/
UTP
Connector
Test Button
Installing the AXIS 560/660
Important note:
❏ Unless specifically stated, the AXIS PrintPoint 1P 560/100,
AXIS PrintPoint 560/100, AXIS 560, and AXIS 660 are
collectively referred to as the AXIS 560/660 within this
document. Similarly, the AXIS PrintPoint 1P 560/100, AXIS
PrintPoint 560/100 and AXIS 560 and are referred to as the
AXIS 560.
Proceed with the following instructions, as appropriate for your type
of network. Refer to all relevant sections if you intend to use the
AXIS 560/660 in a multiprotocol environment.
Hardware Installation
1. Note the serial number found on the underside label of the
AXIS 560/660. You need this number during the configuration.
2. Switch off the printer. Remove the AXIS 560/660 power supply.
3. Using a standard printer cable, connect the printer to one of the
AXIS 560/660 printer ports LPT1, LPT2*, or COM1*.
*Not supported on the AXIS PrintPoint 1P 560/100 model.
4. Connect the AXIS 560/660 to the network using an appropriate
Fast Ethernet, Ethernet or Token Ring cable.
Refer to the User Manual for specific cabling details.
5. For the AXIS 660 only: Slide the Ring Speed switch to 4 or 16, as
appropriate for your Token Ring network.
6. Switch on the printer. Connect the AXIS 560/660 power supply.
7. Ensure that the Network Indicator is flashing. To check the
connections, print a Test Page by depressing the Test Button.
NetWare
Follow the instructions detailed below, in order to install your
AXIS 560/660. If you are using NDPS, you must install the
HP Gateway, together with NDPS, on your NetWare file server.
Otherwise you must install your AXIS 560/660 with the AXIS
NetPilot™ Installation Wizard, supplied on the AXIS Utilities disk.
NetWare using NDPS (Public Access Printer)
1. Make sure that the HP Gateway is configured to automatically
create a public access printer.
2. Connect the AXIS 560/660 to the NetWare network, if it is not
already connected.
The HP Gateway will automatically create a public access printer, to
which any user will have access.
Loading...