AXIS P33-VE installation Guide

INSTALLATION GUIDE
Pendant Kit for
AXIS P3343-VE Network Camera
AXIS P3344-VE Network Camera
AXIS P3346-VE Network Camera
ENGLISH DEUTSCH
FRAN
Ç AIS
ITALIANO
ESPAÑOL
About this Document
This document includes instructions for installing the AXIS P33-VE Series Pendant Kit.
Equipment Modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation.
Liability
Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Support
Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
• find answers to resolved problems in the FAQ database. Search by product, category, or phrases
• report problems to Axis support by logging in to your private support area.
Pendant Kit Installation Guide Page 3
Important!
This product must be used in compliance with local laws and regulations.

Pendant Kit Installation Guide

This installation guide provides instructions for installing the Pendant Kit for the AXIS P3343-VE, AXIS P3344-VE, and AXIS P3346-VE. The Pendant Kit is designed to be installed with the mounting of your choice; for details about the types of mounting go to Accessories at www.axis.com
Please read through the entire guide before proceeding with the installation. For all other aspects of using the Axis network camera, please see the Installation Guide and User’s Manual, available from www.axis.com/techsup
Installation steps
• Check the package contents against the list on page 4.
• Installation instructions. See page 5.
ENGLISH
Page 4 Pendant Kit Installation Guide
Weather shield
Pendant adapter
M4x8 screws
(Bottom view)
Pendant adapter
(Side view)

Package contents

•1 Weather shield
• 1 Pendant adapter
•4 M4x8 screws
Pendant Kit Installation Guide Page 5

Install pendant kit

1. Install the mount of your choice according to the instructions included with the mounting kit. Use the network cable included with the network camera, or follow the instructions for prepar­ing a network cable in the camera’s installation guide.
ENGLISH
2. Attach the weather shield (optional) to the pendant adapter with the 4 M4x8 screws included with this kit. The weather shield is optional and protects against direct sunlight and rain.
Page 6 Pendant Kit Installation Guide
stop screw
3. Attach the pendant adapter to the mount and secure it using the stop screw.
4. Remove the camera unit from the unit casing by pushing the springs aside. Pull the network cable through the gasket hole of the unit casing.
Pendant Kit Installation Guide Page 7
5. Attach all the necessary cables to the camera unit. Pull aside the springs in the unit casing and click the camera unit in place.
6. Insert the unit casing/camera into the pendant adapter and attach by tightening the captive screws. Follow the instructions in the camera’s Installation Guide for adjusting the lens.
ENGLISH
Page 8 Pendant Kit Installation Guide
7. Place the dome cover and attach by tightening the captive screws.
Guide d’installation du kit de suspension Page 9
Important !
Ce produit doit être utilisé conformément aux lois et dispositions locales en vigueur.

Guide d’installation du kit de suspension

Ce guide d’installation fournit des instructions pour l’installation du kit de suspension pour les caméras réseau AXIS P3343-VE, AXIS P3344-VE, et AXIS P3346-VE. Le kit de suspension est conçu pour être installé avec le montage de votre choix : accédez à la section Accessoires sur www.axis.com
Veuillez lire l’intégralité de ce guide avant de procéder à l’installation. Pour plus d’informations sur tous les autres aspects liés à l’utilisation de la caméra réseau Axis, reportez-vous au guide d’installation et au manuel de l’utilisateur, disponible sur le site web www.axis.com/techsup
Procédure d’installation
• Vérifiez le contenu de l’emballage par rapport à
la liste de la page 10.
• Instructions d’installation. Cf. page 11.
FRANÇAIS
Page 10 Guide d’installation du kit de suspension
Protection étanche
Adaptateur de suspension
Vis M4x8
(Vue de dessous)
Adaptateur de suspension
(Vue de profil)

Contenu de l’emballage

• 1 protection étanche
• 1 adaptateur de suspension
•4 vis M4x8
Guide d’installation du kit de suspension Page 11

Installation du kit de suspension

1. Installez le montage de votre choix conformément aux instructions incluses avec le kit de montage. Utilisez le câble réseau inclus avec la caméra réseau ou suivez les instructions pour la préparation d’un câble réseau dans le guide d’installation de la caméra.
2. Fixez la protection étanche (facultatif) à l’adaptateur de suspension à l’aide des 4 vis M4x8 incluses dans ce kit. La protection étanche facultative assure la protection contre une exposition directe aux rayons du soleil et à la pluie.
FRANÇAIS
Loading...
+ 23 hidden pages