How it Works
Axis
Loading...
P3344-VE
User Manual
68 pgs7.03 Mb0
User Manual
34 pgs3.82 Mb0
Specsheet
4 pgs1.58 Mb0
User Guide
58 pgs1.57 Mb0
Comparison
8 pgs609.23 Kb0
User Manual
4 pgs54.52 Kb0
Table of contents
Loading...

Axis P3344-VE User Manual

USER’S MANUAL
AXIS P33 Network Camera Series
AXIS P3343 Network Camera
AXIS P3343-V Network Camera
AXIS P3343-VE Network Camera
AXIS P3344 Network Camera
AXIS P3344-V Network Camera
AXIS P3344-VE Network Camera
AXIS P3346 Network Camera
AXIS P3346-V Network Camera
AXIS P3346-VE Network Camera
Notices
Liability
Every care has been taken in the preparation of this manual. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.
This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see http://www.opensource.apple.com/apsl/). The source code is available from: http://developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Netscape Navigator, OS/2, Real, QuickTime, UNIX, Windows, WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Axis Communications AB is independent of Sun Microsystems Inc. UPnPTM is a certification mark of the UPnPTM Implementers Corporation.
Support
Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and firmware updates
• find answers to resolved problems in the FAQ database. Search by product, category, or phrases
• report problems to Axis support by logging in to your private support area
• visit Axis Support at www.axis.com/techsup
AXIS P33 Series User’s Manual
AXIS P33 Series User’s Manual
Copyright© Axis Communications AB, 2010
December 2009-2010 Part no. 40367
Rev. 2.0
AXIS P33 Series - Table of contents
Contents
AXIS P33 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unit connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Access from a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Access from the internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
The Live View page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Video Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How to stream H.264 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Motion JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Alternative methods of accessing the video stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessing audio streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Video & Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Video Stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stream Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
View Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Overlay Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Privacy Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Focus & Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Audio Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Live View Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
PTZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Preset Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Guard Tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Event Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Event Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Camera Tampering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Port Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Continuous Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Storage - Disk Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Resetting to Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Checking the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical Specifications for AXIS P3343 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Specifications for AXIS P3344 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Technical Specifications for AXIS P3346 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
General performance considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
. . . . . . . . . . . . . . . .52
3

AXIS P33 Series

This manual is relevant to the following network cameras:
AXIS P3343 Network Camera Series
• AXIS P3343 Network Camera
• AXIS P3343-V Network Camera
• AXIS P3343-VE Network Camera
AXIS P3344 Network Camera Series
• AXIS P3344 Network Camera
• AXIS P3344-V Network Camera
• AXIS P3344-VE Network Camera
AXIS P3346 Network Camera Series
• AXIS P3346 Network Camera
• AXIS P3346-V Network Camera
• AXIS P3346-VE Network Camera
AXIS P33 Series
The information in this manual applies to all these camera types except where otherwise stated.
Model Network Camera Features
AXIS P3343 Network Camera Series Resolution 800x600
AXIS P3344 Network Camera Series Megapixel resolution up to 1280x800
AXIS P3346 Network Camera Series 3 Megapixel resolution up to 2048x1536
Standard AXIS P3343 Network Camera
Vandal
Vandal and Environmental casing (VE)
AXIS P3344 Network Camera AXIS P3346 Network Camera
AXIS P3343-V Network Camera AXIS P3344-V Network Camera AXIS P3346-V Network Camera
AXIS P3343-VE Network Camera AXIS P3344-VE Network Camera AXIS P3346-VE Network Camera
Indoor use Built-in microphone
Indoor use, vandal-resistant Built-in microphone
Outdoor use, vandal-resistant Equipped with fan and heater Outdoor-proof design for maximum protection (IP66 Ingress Protection rating)
The AXIS P33 Series includes high-performance network cameras for professional surveillance and remote monitoring. The discreet, vandal-resistant and outdoor-proof design of some of these cameras provides maximum protection in harsh environmental conditions. The built-in heater and fan protect against low and high temperatures respectively and help prevent the glass from misting over. Supported by the industry’s largest base of video management software, the AXIS P33 Series provide the perfect solution for securing prisons, schools, parking ramps, railway stations and other facilities over the local area network or across the Internet.
The compact and cost-efficient design enables easy and flexible installation with tamper-proof mounting on wall or ceiling. It allows for versatile adjustment by panning, tilting and rotating the lens to any camera angle desired.
The built-in Power over Ethernet support enables power to the camera to be delivered via the network, eliminating the need for a power outlet and reducing installation costs. In addition, the consolidation of power gives higher reliability if connected to a central Uninterruptible Power Supply (UPS). These network cameras also offer a comprehensive set of network security features such as multi-level password protection, IP address filtering, HTTPS encryption, network authentication, and access.
4
AXIS P33 Series

Key features

• Superior image quality These cameras offer superior image quality with progressive scan, providing crisp and clear images of both illuminated and dark areas. AXIS M3346 offers superb image quality in 3MP resolution and HDTV streaming in 1080p at 30 fps.
• Easy installation These network cameras are easy to install. They also come with Power over Ethernet that supplies power to the cam­era via the network, eliminating the need for power cables, and reducing installation costs.
• Multiple H.264, and Motion JPEG streams Multiple H.264 and Motion JPEG streams can be provided either in full frame rate or individually optimized for differ­ent quality needs and bandwidth constraints.
• Intelligent video capabilities These network cameras offer intelligent capabilities such as enhanced video motion detection, and detection of cam­era tampering attempts like blocking or spray-painting. The camera also provides capacity for third party analytics modules.
• Improved security These network cameras log all user access, and list currently connected users. They also provide full frame rate video over HTTPS. The vandal-resistant casing in the -V and -VE models make them safe and less vulnerable to destruction.
• Wide temperature range operability These network cameras can function in temperatures ranging from -40°c to +55°c.
• Local storage There is local storage to record to and play back video from an SD card.
• Motorized zoom and focus The zoom and focus for these network cameras can be set remotely over the network.
5

Hardware overview

mounting bracket
unit casing
camera unit
dome cover
holes for cables routed through the wall
holes for cables routed along the wall
SD memory card slot
Camera unit
network connector
control button
LED connectors
audio in
audio out
serial no.
weather shield (AXIS P3343-VE
AXIS P3344-VE AXIS P3346-VE)
Fan output
connector
AXIS P33 Series

LED indicators

LED Color Indication
Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No network connection.
Status Green Steady green for normal operation.
Amber Steady during startup, flashes once during reset to factory default or when restor-
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. To configure, go to Setup > System Options > LED settings. See the online help files for more information.
ing settings.
6
AXIS P33 Series
Pin1
Pin2
Pin3
Pin4
1
2
E.g. push button
3
4
3.3V max. 50mA
D
S
G

Unit connectors

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended.
Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio out - Audio output (line level) that can be connected to a public address (PA) system or an active speaker with a
built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for the audio out.
SDHC memory card slot - The high capacity SD memory card can be used for local recording with removable storage.
I/O terminal connector - Used in applications for e.g. motion detection, event triggering, time lapse
recording and alarm notifications. It provides the interface to:
• 1 transistor output - For connecting external devices such as relays and LEDs. Connected
devices can be activated by the VAPIX Application Programming Interface (API), by the out­put buttons on the Live View page or by an Event Type. The output will show as active (shown under Event Configuration > Port Status) if the alarm device is activated.
• 1 digital input - An alarm input for connecting devices that can toggle between an open and closed circuit, for
example: PIRs, door/window contacts, and glass break detectors. When a signal is received the state changes and the input becomes active (shown under Event Configuration > Port Status).
• Auxiliary power and GND
Function Pin Notes Specifications
GND 1 Ground
3.3V DC Power
Digital Input
Digital Output
2 Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3 Connect to GND to activate, or leave floating (or
unconnected) to deactivate.
4 Uses an open-drain NFET transistor with the source
connected to GND. If used with an external relay, a diode must be connected in parallel with the load, for protection against voltage transients.
Max. load = 50mA
Min. input= - 40V DC Max. input= + 40V DC
Max. load = 100mA Max voltage = + 40V DC
The following connection diagram gives an example of how to connect an auxiliary device.
7
AXIS P33 Series - Accessing the Camera

Accessing the Camera

To install this AXIS product, refer to the supplied installation guide.
The network camera can be used with most standard operating systems and browsers. The recommended browser is Microsoft Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Technical specifications starting on page 52.
Notes:
• To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls and install AXIS Media Control (AMC) on your workstation.
• QuickTime
• If your computer restricts the use of additional software components, the camera can be configured to use a Java applet for viewing Motion JPEG.
• The network camera includes one (1) H.264 decoder license for viewing video streams and (1) AAC audio license. These licenses are automatically installed with AMC. The administrator can disable the installation of the decoders to prevent installation of unlicensed copies.

Access from a browser

1. Start a browser (Internet Explorer, Firefox, Safari).
2. Enter the IP address or host name of the camera in the Location/Address field of your browser. To access the camera from a Macintosh computer (Mac OSX), click on the Bonjour tab and select your AXIS product from the drop-down list (the Bonjour tab is only available in Safari).
3. If this is the first time you are accessing the camera, see Setting the root password, on page 9. Otherwise enter your user name and password, set by the administrator.
4. The camera’s Live View page appears in your browser.
TM
is also supported for viewing H.264 streams.
Note:
The layout of the Live View page may have been cus­tomized to specific requirements. Consequently, some of the examples and functions featured here may differ from those displayed on your own Live View page.
8
AXIS P33 Series - Accessing the Camera
To configure the password directly via an unencrypted connection, enter the password here.
To create an HTTPS connection, click this button.
AXIS P3346

Access from the internet

Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.
For more information, please see NAT traversal (port mapping) for IPv4, on page 40. See also the AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

Setting the root password

To gain access to the product, you must set the password for the default administrator user - ‘root’. This is done in the Configure Root Password dialog, which appears when the network camera is accessed for the first time. To prevent network
eavesdropping the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certificate.
Note:
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. The HTTPS certificate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the first dialog shown above.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Create self-signed certificate.
2. Provide the requested information and click OK. The certificate is created and the password can now be set securely. All traffic to and from the network camera is encrypted from this point on.
3. Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.
Notes:
• The default administrator user name ‘root’ is permanent and cannot be deleted.
• If the password for root is lost, the camera must be reset to the factory default settings. See page 47.
• If prompted, click Yes to install AXIS Media Control, which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this. If using Windows 7 or Windows Vista, you must also run Internet Explorer as administrator; right-click the Internet Explorer icon and select Run as administrator.
Configure capture mode
Capture mode defines how image data is taken from the image sensor with respect to resolution and frame rate, and is set the first time the camera is accessed. Select the desired capture mode from the drop-down list and click OK. See also
Capture mode, on page 17.
9
AXIS P33 Series - The Live View page

The Live View page

How you customize the Live View page determines which buttons are visible. Not all the buttons described below will show up unless configured to do so.
General controls
View size – Click to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream pro­file in the Live View page. Stream profiles are configured under Video > Stream Profiles.
The Action buttons can trigger an event directly from the Live View page. These are enabled under Setup > Live View Config > Layout.
The Snapshot button saves a snapshot of the video image on display. Right-click on the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.
Audio clip – Audio clips can be played manually from the Live View page. Select the audio clip from the drop-down list and click the Play button.
The Fan and Heater buttons help enable the fan and heater for a specified time. These buttons are enabled from Live View Layout. These are only available in the AXIS P3343-VE, AXIS P3344-VE and AXIS P3346-VE network cameras.
AXIS Media Control toolbar
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control (AMC), on page 13 for more information. AMC displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the video stream.
The Snapshot button takes a snapshot of the current image. You can specify the location where the image is saved by using the AXIS Media Control (AMC).
Click the View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the computer keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can be specified using the AXIS Media Control toolbar.
10
Pan/Tilt/Zoom controls
Click the Center mode button and click on a position in the image to center the camera view on that posi­tion.
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.
Pan and Tilt bars – Click a position directly on the bar to steer the camera view directly to the new position in one smooth movement or click on the arrows at the ends of the bars to steer the camera in steps.
Zoom bar – Click a position directly on the zoom bar to zoom all the way to the new position in one move­ment or click the arrows at the ends of the bar to zoom in steps.
AXIS P33 Series - The Live View page
11
AXIS P33 Series - Video Streams

Video Streams

The network camera provides several image and video stream formats. Your requirements and the properties of your network will determine the type you use.
The Live View page in the network camera provides access to H.264, and Motion JPEG video streams, and to the list of available stream profiles. Other applications and clients can also access these video streams/images directly, without going via the Live View page.

How to stream H.264

This video compression standard makes good use of bandwidth, and can provide high quality video streams at less than 1 Mbit/s.
Deciding the combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AMC are:
Unicast RTP This unicast method (RTP over UDP) should
be your first consideration for live unicast video, especially when it is important to always have an up-to-date video stream, even if some images are dropped.
RTP over RTSP This unicast method (RTP tunneled over
RTSP) is useful as it is relatively simple to configure firewalls to allow RTSP traffic.
RTP over RTSP over HTTP
This unicast method can be used to traverse firewalls. Firewalls are commonly configured to allow the HTTP protocol, thus allowing RTP to be tunneled.
Unicasting is used for video streaming, so that there is no video traffic on the network until a client connects and requests the stream.
Note that there are a maximum of 20 simultaneous unicast connections.
Multicast RTP This method (RTP over UDP) should be used for live multicast video. The video stream is always
up-to-date, even if some images are dropped. Multicasting provides the most efficient usage of bandwidth when there are large numbers of cli­ents viewing simultaneously. A multicast broadcast cannot however, pass a network router unless the router is configured to allow this. It is not possible to multicast over the Internet, for example. Note also that all multicast viewers count as one unicast viewer.
AMC negotiates with the camera to determine the transport protocol to use in the order listed above. This order can be changed and the options disabled, to suit specific requirements.
Important!
H.264 is a licensed technology. The network camera includes one viewing client license for each technology. Installing additional unlicensed copies of the viewing client is prohibited. To purchase additional licenses, contact your Axis reseller.

Motion JPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.
The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the network camera is to use the AXIS Media Control in Internet Explorer in Windows.
12
AXIS Media Control (AMC)
AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows is the recommended method of accessing live video from the network camera.
The AMC control panel can be used to configure various video and audio settings. Please see the AMC user manual included in the tool for more information.
The AMC control panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from:
• Windows Control Panel (from the Start menu)
• Alternatively, right-click the video image in Internet Explorer and click Settings to access the AMC window.

Alternative methods of accessing the video stream

You can also access video/images from the network camera in the following ways:
AXIS P33 Series - Video Streams
• Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTP con­nection to the browser and sends data as and when required, for as long as required.
• Still JPEG images in a browser. Enter the path - http://<ip>/axis-cgi/jpg/image.cgi
• Windows Media Player. AMC and the H.264 viewing client need to be installed. The paths that can be used are listed below in the order of preference:
• Unicast via RTP: axrtpu://<ip>/axis-media/media.amp?videocodec=<codec>
• Unicast via RTSP: axrtsp://<ip>/axis-media/media.amp?videocodec=<codec>
• Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/axis-media/media.amp?videocodec=<codec>
• Multicast: axrtpm://<ip>/axis-media/media.amp?videocodec=<codec>
• To access the video stream from QuickTime™ the following paths can be used:
• rtsp://<ip>/axis-media/media.amp?videocodec=<codec>
• rtsp://<ip>/axis-media/media.3gp?videocodec=<codec>
Notes:
• The network camera supports QuickTime 6.5.1 and later.
• QuickTime adds latency to the video stream (up to 3 seconds).
• It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
• <ip> = IP address
• <codec> = h264. The default codec is H.264.
13
AXIS P33 Series - Video Streams

Accessing audio streams

The Live View page provides access to audio through AXIS Media Control; in addition audio can be accessed in the following ways:
VAPIX®
Audio can be accessed through the VAPIX® Application Programming Interface (API). For more information visit http://www.axis.com/techsup
QuickTime and Windows Media Player
Simplex audio can be accessed via QuickTime and Windows Media Player by using the same paths as for video streams (see above). QuickTime supports G.711 and AAC audio encoding.
Java applet
The Java applet supports simplex audio with G.711 encoding.
14
AXIS P33 Series - Video & Audio
Text,
overlay
date & time

Video & Audio

This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access to all settings; and Operators, who have access to the settings for Basic Setup, Video and Events.
You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the configuration menus in the web interface.

Video Stream

The video stream settings appear under four different tabs:
•Image
•Audio
• H.264
•MJPEG
Image
Image Appearance
Use these settings to modify the image resolution and compression, or to rotate the image. Setting the compression level affects the image quality and the amount of bandwidth required; the lower the compression, the higher the image quality with higher bandwidth requirements.
See the online help for more information.
Capture mode - defines how image data is taken from the image sensor prioritizing either resolution or frame rate. The capture mode is configured the first time the camera is accessed (see page 8) but can be re-configured later, see.
View area size - Shows the size of the view are set under View Areas, see View Areas, on page 19.
Mirroring - Mirroring is the horizontal flipping of an image, that gives you another image perspective. This is a useful
function when you need a direct view of the image, for example, in ATMs and door phones.
Video Stream
To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value (1-30) fps in the field.
Overlay Settings
Use these settings to include text, date, and time as overlay. Click for information on available options.
Preview
For a preview of the image before saving, select the Video
format and click Open.... When satisfied with the settings,
click Save.
15
AXIS P33 Series - Video & Audio
Audio
Enable Audio
Check the Enable audio box option to enable the audio functionality.
Note: Audio support must be also enabled under System Options > Security
The settings defined under Audio Settings are displayed under Current Audio Settings.
H.264
GOV Settings
The GOV structure describes the composition of the video stream; setting the GOV-length to a higher value saves considerably on bandwidth but may have an adverse effect on image quality.
Bit Rate Control
The bit rate can be set as Variable bit rate (VBR) or Constant bit rate (CBR). VBR adjusts the bit rate according to image complexity, and thus uses a lot of bandwidth for a lot of activity in the image, and less when the monitored area is quiet.
When using CBR you can set a fixed Target bit rate, which will ensure that the level of bandwidth consumed is predictable.
As the bit rate would usually need to increase for increased image activity, but cannot when CBR is selected, the frame rate and image quality will both be affected negatively. To go some of the way towards compensating for this, it is possible to prioritize either the frame rate or the image quality whenever the bit rate would normally need to be increased. Not setting a Priority means the frame rate and image quality will be affected approximately equally.
MJPEG
Frame Size Control
In some situations the image size may be large due to low light or complex scenery. Adjusting the maximum frame size is a way of controlling the bandwidth and storage used by the MJPEG video stream in these situations. Leaving the frame size as Unlimited will provide consistently good image quality at the expense of increased bandwidth and storage usage during low light. Limiting the frame size will prevent excessive bandwidth and storage usage, but image quality will suffer. To prevent increase in bandwidth and storage usage, the maximum frame size should be set to an optimal amount.
Note: The maximum frame size allowed increases compression in order to maintain a low frame size starting at the com­pression value set under Image settings > Image Appearance > Compression. When compression is 100, the image cannot be made smaller. You may also need to adjust the Resolution setting if a smaller frame size is needed.
16
AXIS P33 Series - Video & Audio

Stream Profiles

There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new customized profiles can be created. Each profile has a descriptive name, describing its use and purpose. The profiles can be accessed from the Live View page.
• To add a new stream profile, click Add... in the
Stream Profile List page. The Stream Profile Settings dialog appears.
• Choose a Profile name and enter a description for your profile.
• Choose the form of Video encoding you wish to use from the drop-down list:
• H.264 - Also known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This
function offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate.
• Motion JPEG - Delivers a high quality video stream, from which individual images can be extracted and saved.
•Select Copy... from the Stream Profile List page to copy an existing stream profile to your system and rename it.
• Click Modify to modify an existing stream profile based on the light situation and motion to be captured by your camera. See the Stream Profile Settings dialog that opens up for more information.
• Highlight the stream profile you wish to remove, then click Remove to remove it from the list.

Camera Settings

This page provides access to the advanced image settings for the network camera.
Capture mode
Capture mode defines how image data is taken from the image sensor prioritizing either frame rate or resolution. The capture mode is set the first time the camera is accessed, see
Capture modes for AXIS P3346:
• 3 MP (4:3 format) @20 fps
• HDTV 1080p (16:9 format) @30 fps
• 2 MP (4:3 format) @30 fps
If the capture mode setting is changed, most other settings, for example view areas, motion detection windows and events, will be removed or reset. Stop all video streams before you change the capture mode.
View Areas
Check the box Enable View Areas to enable the camera’s View areas and digital PTZ functionality.
Image Appearance
Color level - Select an appropriate level by entering a value in the range 0-100. Lower values mean less color saturation,
while the value 100 gives maximum color saturation.
Configure capture mode, on page 9.
Brightness - Image brightness can be adjusted in the range 0-100; a higher value produces a brighter image.
Sharpness - Controls the amount of sharpening applied to the image. A sharper image might increase image noise especially
in low light conditions. A lower setting reduces image noise, but the image would be less sharp.
17
AXIS P33 Series - Video & Audio
Contrast - Adjust the contrast of the image by raising or lowering the value in this field.
White balance
This is used to compensate for the different colors present in different light sources, to make the colors in the image appear the same. The network camera can be set to automatically identify the light source and compensate for its color. Alternatively, the type of light source can be manually selected from the drop-down list. See the online help files each available setting.
Wide Dynamic Range
Wide dynamic range improves the exposure when there is a considerable contrast between light and dark areas in an image.
Note: Wide dynamic range is only possible when the Exposure control setting is set to Automatic.
Exposure Settings
Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth considerations.
Exposure value - Use this slidebar to fine tune the exposure. Increasing the exposure will improve image quality at the expense of the total frame rate. There may also be an increase in motion blur.
Exposure control - Set to Automatic for optimal exposure settings automatically, for example brightness and noise. Flicker-free 50 or 60 Hz is used to remove flicker which can be caused by fluorescent and other light sources. The Hold current option locks the current exposure settings.
for a description of
Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is too bright, or the subject too dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure. The Auto setting can be used in most situations, but for particular requirements, select Defined and click the Edit button to open the Exposure Windows dialog to custom define the exposure zone.
IR cut filter - Set this filter to Off to allow the camera to 'see' infrared light, making the image clearer in low light conditions, e.g. at night or if using an infrared lamp. If set to Auto, the camera will automatically switch between IR cut filter On and Off, according to the current lighting conditions. Note that if this IR cut filter is set to Off, the image is in black and white.
Exposure priority - This defines the balance between image quality and the frame rate. When Motion is prioritized, motion blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide better image quality with a lower frame rate.
Shutter - A smaller value means less motion blur, but requires a well lit scene. A larger value will allow more light in the camera so that even a low lit scene can produce a good image, but at the expense of increased motion blur.
Gain - A lower value means less noise; in dark situations this can lead to a very dark image. A larger value means more amplification making it possible to observe a dark scene, but with increased noise. When Motion is prioritized the shutter time is kept as low as possible. When Low noise is prioritized the gain is kept as low as possible. Setting min/max to the same values is equivalent to setting a fixed value.
Enable automatic iris adjustment - This should always be set to Enabled, except during focusing, or when using a fixed iris lens.
18
AXIS P33 Series - Video & Audio
Iris adjustment - Set the preferred F:value, with this slide bar. When the Enable automatic iris adjustment option is enabled, the precise iris will use this value as long as light conditions are favorable for the setting; otherwise it will adjust itself to the best iris setting. If the automatic iris adjustment is NOT enabled, the precise iris will lock on this setting regardless of light conditions.
The number scale represents the degree to which the iris is open. When the scale is set at 0 the iris opens to the extent allowed. At the setting 100 the iris is closed as much as allowed. The default setting is 50. The actual F-value is shown under the Iris adjustment bar.
View Image Settings
Save the settings and click View... to view the video stream with the current configuration.

View Areas

When setting up a view area it is recommended that video stream resolution be the same size as or smaller than the view area size. Setting the video stream resolution larger than the view area size implies digitally scaled up video after sensor capture, requiring more bandwidth without adding image information. AXIS P3343/ AXIS P3344 allows for one view area; for AXIS P3346 you are allowed to set up a total of 8.
Add a View Area
To add a new view area:
1. Click Add. The new view area appears under Selected view area.
2. Enter a descriptive name in the Name text field.
3. Select an aspect ratio and a video stream resolution. If the Snap to video stream resolutions box option is selected, the view area is automatically resized to equal the size of the video stream resolution.
4. Use your mouse to move and resize the view area. Deselect the Snap to video stream resolutions box option to allow a view area size that differs from available video stream resolutions.
5. Check Enable PTZ to enable digital PTZ for this view area.
6. Click Save to save the settings, or click Reset to revert to the previous settings.
To modify a view area, select the view area in the list and click the Modify... button. Use your mouse to size and position the view area and change settings as needed. Click Save.
To remove a view area, select the view area and click Remove.
19
AXIS P33 Series - Video & Audio
View area
Aspect ratio - is a ratio of width to height in images, 4:3 is a common in television screens and computer monitors while HDTV uses 16:9. Select the aspect ratio for the view area.
Video stream resolution - This drop-down list gives the available video resolutions for the view area, depending on the aspect ratio chosen.
View area size - Shows the size of the view area.
Snap to video stream resolutions - Check this box to automatically size the view area to the same size as the video stream
resolution.
Enable PTZ - Check this box to enable PTZ in the view area.

Overlay Image

An overlay image is a static image superimposed over the video image. An overlay can be used to provide extra information, or to mask a part of the video image.
To use an overlay image, it must be selected from the drop-down list of available images. The overlay (a logo, for example) is then displayed in the video image.
To use your own image, first upload it to the Network Camera. To upload enter the name of the file in the field provided, or click the Browse button, locate the file and click the Upload button.
Once your own image has been uploaded it will be available for selection from the drop-down list. Click Save after selecting the image.

Privacy Mask

Privacy masks are up to three configurable areas of solid color that allow concealment of parts of the image that are not to be viewed. Privacy masks cannot be bypassed via the VAPIX® Application Programming Interface (API).
The Privacy Mask List shows all the masks that are currently configured in the Network Camera and indicates if they are enabled. To define a new mask:
1. Click Add. A rectangle appears on the image.
2. Place the rectangle over the desired area to conceal.
3. To resize, click and pull the bottom right-hand corner.
4. Choose a color, black, white, gray or red for the box from the Privacy mask color drop-down list.
5. Enter a descriptive name in the Mask name field.
6. Click Save.
To edit a privacy mask, select and reshape the mask, move or change color as needed. Refer to the online Help for more information.
20
AXIS P33 Series - Video & Audio

Focus & Zoom

Through this page you can focus and zoom the Network Camera from the web interface. It is recommended that you only use this feature during installation or re-installation of the camera. See the Installation Guide supplied with the product.
An auto focus function is available under the Basic tab. At the bottom of the preview is a pixel counter, which is useful where the image needs to be a certain size; face recognition is a good example. Enable the tool to ensure that an area in the image has the required number of pixels, such as a doorway where people's faces should be recognizable.
Under the Advanced tab fine-tune the focus or run a full range scan to find the optimal focus setting.
Warning: The lens is only guaranteed to function for up to 1000 focus/zoom movements.
Basic
Use the Zoom slide bar to zoom in on a desired area to focus. Changing the zoom will move the focus, which must be adjusted after changing the zoom. If further adjustments are required go to the Advanced tab.
Advanced (AXIS P3343, AXIS P3344)
These tools help to achieve the optimal focus position. The Advanced focus tab can also be used to adjust the zoom. While adjusting the focus manually through the slider, always open the iris first by clicking the Open iris button and enable it when finished by clicking the Enable iris button. (The iris is opened to get a shorter focal depth.) Adjust the size and position of the Focus window as required in the preview.
21
Loading...
+ 47 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use