Axis P32-V, P3214-V, P3215-V User Manual

INSTALLATION GUIDE

AXIS P32-V Network Camera Series

AXIS P3214-V Network Camera

AXIS P3215-V Network Camera

Legal Considerations

www.axis.com/warranty

Video surveillance can be prohibited by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
This product includes one (1) H.264 decoder license. To
purchase further licenses, contact your reseller.

Liability

Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or
use of this material. This product is only to be used for its
intended purpose.

Intellectual Property Rights

Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of the
patents listed at http://www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
This product contains licensed third-party software. See the
menu item “About” in the product’s user interface for more
information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from developer.apple.com/darwin/projects/bonjour/

Equipment Modifications

This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no user-serviceable
components. Unauthorized equipment changes or
modifications will invalidate all applicable regulatory
certifications and approvals.

Trademark Acknowledgments

AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all Java-based
trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. UPnP™ is a
certification mark of the UPnP™ Implementers Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks
of SD-3C, LLC in the United States, other countries or both.
Also, miniSD, microSD, miniSDHC, microSDHC, microSDXC
are all trademarks or registered trademarks of SD-3C, LLC in
the United States, other countries or both.

Warranty

Regulatory Information
Europe

This product complies with the applicable CE marking
directives and harmonized standards:

• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC).

• Low Voltage (LVD) Directive 2006/95/EC. See Safety.

• Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling.

A copy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
Information.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill
applicable standards for:

• Radio frequency emission when installed according to the
instructions and used in its intended environment.

• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used in its
intended environment.

USA

Using an unshielded network cable (UTP) -

equipment has been tested using an unshielded network
cable (UTP) and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Using a shielded network cable (STP) - This

equipment has also been tested using a shielded network
cable (STP) and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician
for help.

To be used in a residential area or a demanding electrical
environment, the product shall be connected using a shielded
network cable (STP) that is properly grounded.

Canada

This digital apparatus complies with CAN ICES-3 (Class B).
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
Cet appareil numérique est conforme à la norme CAN NMB-3
(classe B). Le produit doit être connecté à l'aide d'un câble
réseau blindé (STP) qui est correctement mis à la terre.

This

Europe

ࢇ Е ɼࢽࡈ% ࢷ࢕ળࢶଢԻ۰ ࣯Ի
ɼࢽ߾۰ یࡈଜЕ ʨࡶ ּࢶࡳԻ ଜֲ ֻҘ 
ࠇ߾۰ یࡈଟ ܹ ࢑ݡТЬ ࢶࢸ஢ ࢻѹ 673
VKLHOGHG WZLVWHG SDLU ৼࢇٴࡶ یࡈଜࠆ ࢿ૽
ࡶࠉʼଜݫݤࠝ

この装置は、クラスB 情報技術装置です。この装置
は、家庭環境で使用することを目 的としています
が、この装置がラジオやテレビジョン受信機に近
接して使用されると、 受信障害を引き起こすこと
があります。 取扱説明書に従って正しい取り扱い
をして下さい。 本製品は、シールドネットワーク
ケーブル(STP)を使用して接続してください。また
適切に接地してください。

This digital equipment fulfills the requirements for RF
emission according to the Class B limit of EN 55022. The
product shall be connected using a shielded network cable
(STP) that is properly grounded.
This product fulfills the requirements for emission and
immunity according to EN 50121-4 and IEC 62236-4 railway
applications.
This product fulfills the requirements for immunity according
to EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according
to EN 55024 office and commercial environments

Australia/New Zealand

This digital equipment fulfills the requirements for RF
emission according to the Class B limit of AS/NZS CISPR 22.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.

Contact Information

Axis Communications AB
Emdalavägen 14
22369Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com

Support

Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:

• download user documentation and software updates

• find answers to resolved problems in the FAQ database.
Search by product, category, or phrase

• report problems to Axis support staff by logging in to your
private support area

• chat with Axis support staff (selected countries only)

• visit Axis Support at www.axis.com/techsup/

Should you require any technical assistance, please contact
appropriate channels according to your AVHS license
agreement to ensure a rapid response.

Learn More!

Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.

English

Safety

This product complies with IEC/EN 60950-1, Safety of
Information Technology Equipment. The product shall be
grounded either through a shielded network cable (STP) or
other appropriate method.

Disposal and Recycling

When this product has reached the end of its useful life,
dispose of it according to local raws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.

Europe

This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) is applicable in
the European Union member states. To prevent
potential harm to human health and the environment, the
product must be disposed of in an approved and
environmentally safe recycling process. For information
about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses
should contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
(RoHS).

China

This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).

Safeguards

Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.

• Store the Axis product in a dry and ventilated environment.

• Avoid exposing the Axis product to vibration, shocks or
heavy pressure. Do not install the product on unstable
brackets, unstable or vibrating surfaces or walls, since this
could cause damage to the product.

• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.

• Do not use chemicals, caustic agents, or aerosol cleaners.
Use a damp cloth for cleaning.

• Use only accessories that comply with technical
specification of the product. These can be provided by Axis
or a third party.

• Use only spare parts provided by or recommended by Axis.

• Do not attempt to repair the product by yourself, contact
Axis or your Axis reseller for service matters.

• Use a limited power source (LPS) with either a rated output
power limited to <100 W or a rated output current limited
to <5 A.

• The product shall be connected using a shielded network
cable (STP). All cables connecting the product to the
network switch shall be shielded (STP) and intended for
their specific use. Make sure that the network switch is
properly grounded.

.

• This Axis product shall be used in compliance with local
laws and regulations.

• The Axis product should be installed by a trained
professional. Observe relevant national and local
regulations for the installation.

Transportation

• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.

Battery Replacement

This Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of 5
years. Low battery power affects the operation of the RTC,
causing it to reset at every power-up. A log message will
appear when the battery needs replacing. The battery should
not be replaced unless required!
If the battery does need replacing, please contact
www.axis.com/techsup for assistance.

• Dispose of used batteries according to the manufacturer's
instructions.

• Risk of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent battery, as
recommended by the manufacturer.

Dome Cover Cleaning

• Be careful not to scratch or damage the dome cover. Do
not clean a dome cover that looks clean to the eye and
never polish the surface. Excessive cleaning could damage
the surface.

• For general cleaning of a dome cover it is recommended to
use a non-abrasive, solvent-free neutral soap or detergent
with water and a soft cloth. Rinse well with clean
lukewarm water. Dry with a soft cloth to prevent water
spotting.

• Never use harsh detergents, gasoline, benzene or acetone
etc. and avoid cleaning in direct sunlight or at elevated
temperatures.

Français

Mesures de sécurité

Lisez attentivement le présent Guide d'installation avant
d'installer le produit Axis. Conservez le Guide d'installation
pour une utilisation ultérieure.

• Conservez le produit Axis dans un environnement sec et
aéré.

• Évitez d'exposer le produit Axis aux vibrations, aux chocs
ou à une forte pression. N'installez pas le produit sur un
support instable, ou des surfaces ou des murs instables ou
vibrants, car cela pourrait l'endommager.

• N'utilisez que les outils applicables pour installer le produit
Axis ; une force excessive pourrait endommager le produit.

• Pour le nettoyage, n’utilisez ni produits chimiques, ni
substances caustiques ou aérosols. Utilisez un chiffon
humide pour le nettoyage.

• N’utilisez que des accessoires conformes aux
caractéristiques techniques du produit. Ceux-ci peuvent
être fournis par Axis ou par un fournisseur tiers.

• Utilisez uniquement des pièces de rechange fournies ou
recommandées par Axis.

• Ne tentez pas de réparer le produit vous-même, contactez
Axis ou votre revendeur Axis pour toute réparation.

• Utilisez une source d'alimentation limitée (LPS) dont la
puissance de sortie nominale est limitée à <100 W ou dont

le courant de sortie nominal est limité à <5 A.

• Le produit doit être connecté à l'aide d'un câble réseau
blindé (STP). Tous les câbles reliant le produit au
commutateur réseau doivent être blindés (STP) et destinés
à leur usage spécifique. Assurez-vous que le commutateur
réseau est convenablement mis à la terre.

• Ce produit Axis doit être utilisé conformément aux lois et
réglementations locales en vigueur.

• Le produit Axis doit être installé par un professionnel
qualifié. Veuillez vous conformer aux règlements nationaux
et locaux relatifs à l'installation.

Transport

• Pour transporter le produit Axis et éviter de l'endommager,
utilisez l'emballage d'origine ou un emballage équivalent.

Remplacement des piles

Ce produit Axis nécessite une pile au lithium CR2032 de
3,0 V pour l'alimentation de son horloge en temps réel
interne. Dans des conditions normales d'utilisation, cette pile
est censée durer au moins 5 ans. Si la pile est faible, le
fonctionnement de l'horloge en temps réel peut être affecté
et entraîner sa réinitialisation à chaque mise sous tension.
Un message enregistré apparaît lorsque la pile doit être
remplacée. Ne remplacez la pile qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez contacter
www.axis.com/techsup pour obtenir de l’aide.

• Jetez les piles usagées conformément aux consignes du
fabricant.

• Le remplacement incorrect de la pile peut entraîner un
risque d'explosion.

• Remplacez la pile par une pile identique ou équivalente
uniquement, en respectant les recommandations du
fabricant.

Nettoyer la bulle du dôme

• Veillez à ne pas rayer ou endommager la bulle du dôme. Ne
nettoyez pas la bulle du dôme si elle semble propre à l'œil
nu et ne frottez jamais sa surface. Un nettoyage excessif
peut l'endommager.

• Pour le nettoyage général de la bulle du dôme, il est
recommandé d'utiliser un savon ou un détergent neutre
sans solvant, non abrasif, avec de l'eau et un chiffon doux.
Rincez abondamment avec de l’eau tiède et propre. Séchez
à l'aide d'un chiffon doux pour éviter les tâches d'eau.

• N'utilisez jamais de détergents forts, d'essence, de benzène
ou d'acétone, etc. et évitez toute exposition directe aux
rayons du soleil ou à des températures élevées lors du
nettoyage.

Deutsch

Sicherheitsvorkehrungen

Bitte lesen Sie diese Installationsanleitung sorgfältig durch,
bevor Sie mit der Installation des Axis Produkts beginnen.
Halten Sie die Installationsanleitung bereit, falls Sie darauf
zurückgreifen müssen.

• Lagern Sie das Axis-Produkt in einer trockenen und
belüfteten Umgebung.

• Setzen Sie das Axis Produkt keinen Vibrationen,
Erschütterungen oder starkem Druck aus. Installieren Sie
das Produkt nicht an instabilen Halterungen oder
instabilen oder vibrierenden Oberflächen oder Mauern, da
dadurch das Produkt beschädigt werden könnte.

• Verwenden Sie bei der Installation des Axis Produkts nur
geeignetes Werkzeug; zu hoher Kraftaufwand kann das
Produkt beschädigen.

• Verwenden Sie keine chemischen, ätzenden oder
aerosolhaltigen Reinigungsmittel. Verwenden Sie zur
Reinigung ein feuchtes Tuch.

• Verwenden Sie nur Zubehör, das den technischen
Spezifikationen des Produkts entspricht. Dieses ist von Axis
oder Drittanbietern erhältlich.

• Verwenden Sie nur Ersatzteile, die von Axis empfohlen bzw.
bereitgestellt wurden.

• Versuchen Sie nicht, das Produkt selbst zu reparieren.
Wenden Sie sich bei Service-Angelegenheiten an Axis oder
an Ihren Axis-Händler.

• Verwenden Sie eine Stromquelle mit begrenzter Leistung
(LPS), entweder mit einer Nennausgangsleistung von
<100 W oder einem dauerhaft auf <5 A begrenzten
Nennausgangsstrom.

• Das Produkt sollte mit einem abgeschirmten Netzwerkkabel
(STP) angeschlossen werden. Alle Kabel, die das Produkt
mit dem Netzwerkswitch verbinden, sollten abgeschirmt
(STP) und nur für die bestimmte Anwendung eingesetzt
werden. Stellen Sie sicher, dass der Netzwerkswitch
vorschriftsmäßig geerdet ist.

• Verwenden Sie dieses Axis-Produkt unter Beachtung der
vor Ort geltenden rechtlichen Bestimmungen.

• Das Axis Produkt sollte nur von geschultem Fachpersonal
installiert werden. Beachten Sie bei der Montage die
geltenden nationalen und lokalen Bestimmungen.

Transport

• Transportieren Sie das Axis-Produkt nur in der
Originalverpackung bzw. in einer vergleichbaren
Verpackung, damit das Produkt nicht beschädigt wird.

Batteriewechsel

Dieses Axis-Produkt ist mit einer 3,0 V CR2032
Lithium-Batterie als Stromversorgung für die interne
Echtzeituhr (RTC) ausgestattet. Unter normalen Bedingungen
hält die Batterie mindestens 5 Jahre. Bei entladener Batterie
ist der Betrieb der Echtzeituhr nicht mehr ausreichend
gewährleistet, so dass die Uhr bei jedem Systemstart
zurückgesetzt wird. Sie erhalten eine Protokollnachricht,
wenn ein Batteriewechsel erforderlich ist. Die Batterie sollte
erst bei Bedarf gewechselt werden.
Unter www.axis.com/techsup finden Sie Informationen
darüber, was Sie beim Austausch der Batterie beachten
müssen.

• Verbrauchte Batterien sind gemäß den
Herstelleranweisungen zu entsorgen.

• Explosionsgefahr bei fehlerhaftem Batteriewechsel!

• Die Batterie muss durch dasselbe oder ein gleichwertiges
Fabrikat ersetzt werden, das vom Hersteller zugelassen ist.

Reinigung der Kuppelabdeckung

• Achten Sie darauf, die Kuppelabdeckung nicht zu
zerkratzen oder zu beschädigen. Reinigen Sie die
Kuppelabdeckung nicht, solange sie sauber aussieht, und

polieren Sie niemals die Oberfläche. Übermäßiges Reinigen
kann die Oberfläche beschädigen.

• Zur allgemeinen Reinigung einer Kuppelabdeckung wird die
Verwendung einer nicht aggressiven, lösungsmittelfreien
neutralen Seife bzw. eines solchen Reinigungsmittels
zusammen mit Wasser und einem weichen Tuch
empfohlen. Spülen Sie gut mit sauberem, lauwarmem
Wasser nach. Trocknen Sie die Kuppelabdeckung mit einem
weichen Tuch ab, um Wasserflecken zu vermeiden.

• Verwenden Sie niemals scharfe Reinigungsmittel, Benzin,
Benzol, Aceton o. Ä., und führen Sie die Reinigung nicht
unter direkter Sonneneinstrahlung oder bei hohen
Temperaturen durch.

Italiano

Sicurezza

Leggere attentamente questa Guida all'installazione prima di
installare un prodotto Axis. Conservare la Guida
all'installazione per ulteriori riferimenti.

• Conservare il prodotto Axis in un ambiente asciutto e ben
ventilato.

• Evitare di esporre il prodotto Axis alle vibrazioni, agli urti o
a forte pressione. Non installare il prodotto su staffe
instabili, superfici o pareti instabili o vibranti, poiché ciò
potrebbe danneggiare il prodotto.

• Utilizzare solo strumenti idonei quando si installa il
prodotto Axis. Una forza eccessiva potrebbe danneggiare il
prodotto.

• Non utilizzare sostanze chimiche, agenti caustici o
detergenti spray. Utilizzare un panno umido per la pulizia.

• Utilizzare solo accessori conformi con le specifiche
tecniche del prodotto. Queste possono essere fornite da
Axis o da terze parti.

• Utilizzare solo parti di ricambio fornite o raccomandate da
Axis.

• Non tentare di riparare il prodotto da soli, contattare Axis o
il rivenditore di zona Axis per assistenza.

• Utilizzare una sorgente di alimentazione limitata (LPS) sia
con una potenza di uscita nominale limitata a <100 W o
una corrente nominale di uscita limitata a <5 A.

• Il prodotto deve essere collegato con un cavo di rete
schermato (STP). Tutti i cavi che collegano il prodotto allo
switch di rete devono essere schermati (STP) e destinati al
loro uso specifico. Assicurarsi che lo switch di rete sia
correttamente messo a terra.

• Questo prodotto Axis deve essere utilizzato in conformità
alle leggi e alle disposizioni locali.

• Il prodotto Axis deve essere installato da un tecnico
qualificato. Osservare le disposizioni nazionali e locali per
l'installazione.

Trasporto

• Quando si trasporta il prodotto Axis, utilizzare l'imballo
originale o un imballo equivalente per evitare di
danneggiare il prodotto.

Sostituzione della batteria

Questo prodotto Axis utilizza una batteria al litio CR2032 da

3.0 V per alimentare il real-time clock (RTC) interno. In

normali condizioni questa batteria ha una durata di almeno 5
anni. La batteria scarica influisce sul funzionamento dell'RTC,
che viene reimpostato ad ogni accensione. Un messaggio di
registro apparirà quando la batteria dovrà essere sostituita.

La batteria non deve essere sostituita a meno che non sia
necessario.
Se la batteria deve essere sostituita, contattare
www.axis.com/techsup per assistenza.

• Smaltire le batterie usate secondo le istruzioni del
produttore.

• Rischio di esplosione se la batteria non viene sostituita
correttamente.

• Sostituire solo con una batteria identica o equivalente,
come raccomandato dal produttore.

Pulizia della copertura a cupola

• Fare attenzione a non graffiare o danneggiare la copertura
a cupola. Non pulire una copertura a cupola visivamente
pulita e non lucidare mai la superficie. Una pulizia
eccessiva potrebbe danneggiare la superficie.

• Per la pulizia generale della copertura a cupola si
raccomanda l'uso di un sapone neutro, non abrasivo e privo
di solventi o di un detergente con acqua e un panno
morbido. Risciacquare perfettamente con acqua tiepida
pulita. Asciugare con un panno morbido per evitare
macchie d'acqua.

• Non utilizzare detergenti irritanti, benzina, benzene o
acetone, ecc. ed evitare di pulire alla luce diretta del sole o
a temperature elevate.

Español

• La instalación del producto Axis debe realizarla un
profesional cualificado. Siga las normativas nacionales y
locales aplicables para la instalación.

Transporte

• A la hora de transportar el producto Axis, utilice el
embalaje original o uno equivalente para no dañar el
producto.

Sustitución de la batería

Este producto Axis utiliza una batería de litio CR2032 3.0 de
3,0 V como fuente de alimentación para su reloj de tiempo
real interno (RTC). En condiciones normales, esta batería
durará un mínimo de 5 años. Cuando la batería tiene poca
carga, el funcionamiento del RTC se puede ver afectado, ya
que esto puede hacer que se reinicie cada vez que se
encienda. Aparecerá un mensaje de registro cuando sea
necesario sustituir la batería. No se debe sustituir la batería a
menos que sea necesario.
Si necesita sustituir la batería, visite la página
www.axis.com/techsup para recibir asistencia.

• Deseche las baterías usadas según las instrucciones del
fabricante.

• Existe peligro de explosión si la batería se sustituye de
forma incorrecta.

• Utilice solo baterías de recambio iguales o equivalentes, de
acuerdo con las recomendaciones del fabricante.

Limpieza de la cubierta del domo

Medidas preventivas

Lea detenidamente esta Guía de instalación antes de instalar
el producto Axis. Guarde la Guía de instalación para poder
consultarla en el futuro.

• Guarde el producto Axis en un entorno seco y ventilado.

• Evite exponer el producto Axis a vibraciones, golpes o
presiones excesivas. No instale el producto en soportes
inestables ni en superficies o paredes inestables o con
vibraciones, ya que esto podría dañarlo.

• Utilice solo las herramientas apropiadas para instalar el
producto Axis; una fuerza excesiva podría dañarlo.

• No utilice productos químicos, agentes cáusticos ni
limpiadores en aerosol. Límpielo con un paño húmedo.

• Utilice solo accesorios que cumplan las especificaciones
técnicas del producto. Puede obtenerlos de Axis o de un
tercero.

• Utilice solo piezas de recambio suministradas o
recomendadas por Axis.

• No intente reparar el producto usted mismo, póngase en
contacto con Axis o con el distribuidor de Axis para los
temas de servicio técnico.

• Use una fuente de alimentación limitada (LPS) con una
potencia nominal de salida limitada a <100 W o una
corriente nominal de salida limitada a <5 A.

• El producto se conectará mediante un cable de red
blindado (STP). Todos los cables que conecten el producto
al conmutador de red deberán estar blindados (STP) y
diseñados para su uso específico. Asegúrese de que el
conmutador de red disponga de una conexión a tierra
adecuada.

• Este producto Axis se utilizará de conformidad con la
legislación y normativas locales.

• Tenga cuidado de no arañar ni dañar la cubierta del domo.
No limpie una cubierta del domo que parezca limpia y no
pula nunca la superficie. El exceso de limpieza podría dañar
la superficie.

• Para la limpieza general de la cubierta del domo se
recomienda utilizar un jabón neutro no abrasivo y sin
disolvente o un detergente con agua y un paño suave.
Aclare bien con agua limpia y tibia. Seque con un paño
suave para evitar las manchas de agua.

• No utilice detergentes abrasivos, gasolina, benceno,
acetona, etc., y evite limpiarlo con luz directa del sol o a
temperaturas elevadas.