Axis M1013, M1014 Quick User Guide

QUICK GUIDE

AXIS M10 Series

AXIS M1013 Network Camera
AXIS M1014 Network Camera

Legal Considerations

Video and audio surveillance can be prohibited
by laws that vary from country to country. Check
the laws in your local region before using this
product for surveillance purposes. This product
includes one (1) H.264 decoder license. To pur­chase further licenses, contact your reseller.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, Quick­Time, UNIX, Windows, Windows Vista and WWW
are registered trademarks of the respective
holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks
of Oracle and/or its aliates. UPnPTM is a
certication mark of the UPnPTM Implementers
Corporation.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to
fulll applicable standards for:

Radio frequency emission when installed •
according to the instructions and used in its
intended environment.
Immunity to electrical and electromagnetic •
phenomena when installed according to the in­structions and used in its intended environment.

USA

This equipment has been tested using shielded
cables (STP) and found to comply with the limits
for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.•
Increase the separation between the equipment •
and receiver.
Connect the equipment into an outlet on a •
circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV •
technician for help.

Canada

This Class B digital apparatus complies with
Canadian ICES-003.

Europe

This digital equipment fullls the
requirements for RF emission according

to the Class B limit of EN 55022. This
product fullls the requirements for immunity
according to EN 61000-6-1 residential,
commercial and light-industry environments. This
product fullls the requirements for immunity
according to EN 61000-6-2 industrial
environments. This product fullls the
requirements for immunity according to EN
55024 residential and commercial environments.

Australia

This digital equipment fullls the requirements
for RF emission according to the Class B limit of
AS/NZS CISPR 22.

Korea

이 기기는 가정용(B급) 전자파적합기기로서 주로 가
정에서 사용하는 것을 목적으로 하며, 모든 지역에

서 사용할 수 있습니다.

Japan

この装置は、クラスB 情報技術装置です。この装置は、
家庭環境で使用することを目 的としていますが、この
装置がラジオやテレビジョン受信機に近接して使用さ
れると、 受信障害を引き起こすことがあります。 取扱説

明書に従って正しい取り扱いをして下さい。

Safety

This product complies to EN/IEC 60950-1, Safety
of Information Technology Equipment. The power
supply used with this product shall fulll the
requirements for Safety Extra Low Voltage and
Limited Power Source according to EN/IEC/UL
60950-1.

Equipment Modications

This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthor­ized equipment changes or modications will
invalidate all applicable regulatory certications
and approvals. This product is only to be used for
its intended purpose.

Liability

Every care has been taken in the preparation
of this document. Please inform your local Axis
oce of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible
for any technical or typographical errors and re­serves the right to make changes to the product
and documentation without prior notice.

Axis Communications AB makes no warranty of
any kind with regard to the material contained
within this document, including, but not limited
to, the implied warranties of merchantability and
tness for a particular purpose. Axis Communica­tions AB shall not be liable nor responsible for
incidental or consequential damages in connec­tion with the furnishing, performance or use of
this material. This product is only to be used for
its intended purpose.

RoHS

This product complies with both the
European RoHS directive, 2002/95/EC, and

the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a
Directive 2002/96/EC on Waste Electrical

and Electronic Equipment (WEEE
Directive). This directive is applicable in the
European Union member states. The WEEE
marking on this product (see right) or its
documentation indicates that the product must
not be disposed of together with household
waste. To prevent possible harm to human health
and/or the environment, the product must be
disposed of in an approved and environmentally
safe recycling process. For further information on
how to dispose of this product correctly, contact
the product supplier, or the local authority
responsible for waste disposal in your area.
Business users should contact the product
supplier for information on how to dispose of
this product correctly. This product should not be
mixed with other commercial waste.

Support

Should you require any technical assistance,
please contact your Axis reseller. If your ques­tions cannot be answered immediately, your
reseller will forward your queries through the
appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:

download user documentation and rmware •
updates
nd answers to resolved problems in the FAQ •
database. Search by product, category, or
phrases
report problems to Axis support by logging in to •
your private support area

Safeguards

Store the Axis product in a dry and ventilated •
environment.
Avoid exposing the Axis product to vibration, •
shocks or heavy pressure. Do not install the
product on unstable brackets, unstable or vi­brating surfaces or walls, since this could cause
damage to the product.
Only use applicable tools when installing the •
Axis product; excessive force could cause dam­age to the product.
Do not use chemicals, caustic agents, or aerosol •
cleaners. Use a damp cloth for cleaning.
Use only accessories that comply with technical •
specication of the product. These can be
provided by Axis or a third party.
Use only spare parts provided by or recom-•
mended by Axis.
Do not attempt to repair the product by •
yourself, contact Axis or your Axis reseller for
service matters.

This Axis product must be used in compliance •
with local laws and regulations.

Transportation

When transporting the Axis product, use the •
original packaging or equivalent to prevent
damage to the product.

4 AXIS M1013/M1014

1x

1x 1x 1x 2x

1x 1x 1x 1x

Camera owner authentication key

The authentication key on this label is used to authenticate the owner/administrator of this Axis
camera. The key is associated with the camera’s unique serial number (S/N), as shown at the top of the
label. The authentication key is used for registering the camera with an AVHS service provider for hosted
video. For more information and help to nd a local AVHS Service Provider, go to:

Pleaseretain this document for future reference.

http://www.axis.com/products/avhs/

Label here

©2006-2010 Axis Communications AB.
Axis is a registered trademark. All other company names and products are
trademarks or registered trademarks of their respective companies. We
reserve the right to introduce modications without notice.

Part No. 38655

1 YEAR LIMITED HARDWARE WARRANTY

Warranty Coverage

Axis Communications AB’s (“Axis”) warranty obligations are limited to the terms set forth below:
Axis warrants the original purchaser that the AXIS Network Video product enclosed with this limited hardware warranty will in
respect of the hardware be free from defects in design, workmanship and materials under normal use for a period of one (1) year from
the date of the original end-user purchase (“Warranty Period”).

Notwithstanding the above the Warranty Period shall be limited to a period of three (3) months from the date of the original end-user
purchase for PTZ Network Cameras (not including Dome Network Cameras) which are at any time used in continuous motion
applications (i.e. sequence mode and guard tour). For avoidance of doubt, if said products are not at any time used in continuous
motion applications, the original hardware warranty of one (1) year will apply.

The original purchaser shall without undue delay notify Axis of any defect which appears according to Axis’ RMA Handling, failure
to which shall mean that the purchaser loses its right to have the defect remedied. A valid form of a bill of sale or receipt from an
authorized retailer/distributor with the date of the original purchase must be presented to obtain warranty service. If a valid claim is
received within the Warranty Period, the sole remedy of the original purchaser and Axis’ sole and exclusive liability shall be limited
to, at Axis sole discretion, either repair of the hardware defect using new or refurbished replacement parts, or replacement of the
product. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days,
whichever is longer. When a product or part is exchanged the replacement hardware becomes the property of the original purchaser
and all hardware or part thereof that is replaced shall become the property of Axis.

This Limited Warranty is applicable in all countries and may be enforced by contacting Axis support worldwide, for more
information please visit our web site www.axis.com

Exclusions and Limitations

This warranty does not apply (a) to faulty and improper installation, maintenance, service, repair and/or alteration in any way that is
not contemplated in the documentation for the product or carried out with Axis’ consent in writing, operational adjustments covered
in the operating manual for the product or normal maintenance, (b) to cosmetic damages, (c) if the product is modified or tampered
with, (d) if the product is damaged by acts of God, misuse, abuse, negligence, accident, normal wear and tear and deterioration,
improper environmental conditions (including, but not limited to, electrical surges, water damage and heat exposure) or lack of
responsible care, (e) if the product has had the model or serial number altered, defaced or removed, (f) to consumables (such as
batteries) (g) to products that have been purchased “as is” and Axis, the seller or the liquidator expressly disclaim their warranty
obligation pertaining to the product, (h) to any non-Axis hardware product or any software (irrespective of packaged or sold with an
Axis hardware product) and Axis products purchased from an unauthorized distributor/reseller,(i) to damage that occurs in shipment
or (j) to damages by any other causes not related to defective design, workmanship and/or materials.

NOTE:

• If the product is to be used outdoors or in dusty, humid, or other hostile environments, it must be suitably protected.

• Further, camera products specifically, must be protected, whether in use or not, from exposure to direct sunlight or halogen

light – which may damage the camera image sensor. This applies to both indoor and outdoor use of the cameras.

• For camera products supplied without a lens, extreme care should be used when mounting a lens on these products. Damage to
the product due to incorrectly mounted lenses will invalidate this limited hardware warranty.

• Failure to comply with any of the aforementioned requirements will invalidate this Limited Hardware Warranty.

THE WARRANTY AND REMEDIES PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED
WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. CERTAIN JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF LAWS
UNDER SUCH JURISDICTIONS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY
PERIOD IDENTIFIED ABOVE. UNLESS PROVIDED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER
PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY AND TO THE EXTENT PERMITTED BY LAW,
NEITHER AXIS NOR ANY AFFILIATES SHALL BE LIABLE FOR ANY LOSS, (INCLUDING LOSS OF DATA AND INFORMATION),
INCONVENIENCE, OR DAMAGE, INCLUDING, BUT NOT LIMITED TO, DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE AXIS PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY OR ANY OTHER LEGAL THEORY. NOTWITHSTANDING THE FOREGOING, AXIS’ TOTAL LIABILITY FOR ALL
CLAIMS UNDER THIS WARRANTY SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT. THESE LIMITATIONS ON
POTENTIAL LIABILITIES HAVE BEEN AN ESSENTIAL CONDITION IN SETTING THE PRODUCT PRICE.

Applicable Law

• This Limited Warranty is governed by and construed under the laws of Sweden.

• This Limited Hardware Warranty may be subject to Axis’ change at any time without prior notice.

1Yr Warranty Sheet – Video March 2007 Rev. 4.00 Part no. 28801

4x 4x 1x