This equipment has been designed and tested to
fulfill applicable standards for:
• Radio frequency emission when installed
according to the instructions and used in its
intended environment.
• Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended
environment.
USA - This equipment has been tested using a
shielded network cable (STP) and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Europe - This digital equipment fulfills
the requirements for RF emission according to
the Class B limit of EN 55022.
This product fulfills the requirements for
immunity according to EN 55024 residential and
commercial environments.
Canada - This Class B digital apparatus
complies with Canadian ICES-003.
Australia - This digital equipment fulfills the
requirements for RF emission according to the
Class B limit of AS/NZS CISPR 22.
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment
contains no user-serviceable components.
Unauthorized equipment changes or
modifications will invalidate all applicable
regulatory certifications and approvals.
Liability
Every care has been taken in the preparation of
this document. Please inform your local Axis
office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible
for any technical or typographical errors and
reserves the right to make changes to the
product and documentation without prior
notice. Axis Communications AB makes no
warranty of any kind with regard to the material
contained within this document, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Axis Communications AB shall not be
liable nor responsible for incidental or
consequential damages in connection with the
furnishing, performance or use of this material.
RoHS
This product complies with both the
European RoHS directive, 2002/95/EC,
and the Chinese RoHS regulations,
ACPEIP.
Page 3
WEEE Directive
The European Union has enacted a
Directive 2002/96/EC on Waste
Electrical and Electronic Equipment
(WEEE Directive). This directive is
applicable in the European Union member
states.
The WEEE marking on this product (see right) or
its documentation indicates that the product
must not be disposed of together with
household waste. To prevent possible harm to
human health and/or the environment, the
product must be disposed of in an approved and
environmentally safe recycling process. For
further information on how to dispose of this
product correctly, contact the product supplier,
or the local authority responsible for waste
disposal in your area.
Business users should contact the product
supplier for information on how to dispose of
this product correctly. This product should not
be mixed with other commercial waste. For more
information, visit www.axis.com/techsup/.
Support
Should you require any technical assistance,
please contact your Axis reseller. If your
questions cannot be answered immediately, your
reseller will forward your queries through the
appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:
• download user documentation and software
updates
• find answers to resolved problems in the FAQ
database. Search by product, category, or
phrase
• report problems to Axis support staff by
logging in to your private support area
• chat with Axis support staff (selected
countries only)
• visit Axis Support at www.axis.com/techsup/
Page 4
Page 5
AXIS T8129 PoE ExtenderPage 5
PoE extender
Network connector
LED indicators
Camera
PoE extender
Switch
Midspan
Max 100 m (328 ft.)Max 100 m
AXIS T8129 PoE Extender
Installation Guide
Hardware overview
ENGLISH
Page 6
Page 6AXIS T8129 PoE Extender
Technical Specifications
Item
ModelAXIS T8129 PoE Extender
Data rate10/100 Mbps half/full duplex
ConnectorsShielded RJ-45, EIA 568A and 568B
Network cables Shielded category 5 (or higher)
Display and
indicators
ComplianceIEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
MountingWall or shelf
EnvironmentIndoor
ApprovalsFCC part 15, Class B with FTP cabling, EN 55022 Class B
Operating
conditions
Storage-40 °C to 74 °C (-40 °F to 165 °F)
Dimension
(HxWxD)
Weight45 g (1.6 oz.)
Specifications
LED indicators are located on the RJ-45 connector
Power indicator: PoE enabled (Green)
Network indicator: Link/activity (Yellow)
(Emissions), EN 55024 (Immunity)
-10 °C to 50 °C (14 °F to 122 °F)
Humidity max. 85% RH (non-condensing)
105 x 40 x 22 mm (4.1” x 1.6” x 0.9”)
Page 7
AXIS T8129 PoE ExtenderPage 7
Maximum Distances for Power Sources
Multiple PoE extenders can be connected every 100 meters to obtain
greater distances. The actual figures depend on operating conditions. The
range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where
specified.
Examples for low-power PoE cameras (that are PoE Class 1, or require
under 6 watts):
• AXIS M11 Network Camera Series
• AXIS 221 Network Camera
• AXIS M30 Network Camera Series
• AXIS M31-R/-VE Network Camera Series
• AXIS M32 Network Camera Series
• AXIS P33 Network Cameras (indoor models)
• AXIS 212 PTZ/-V Network Camera
PoE Source
PoE switch or Axis 15 W
midspan (802.3at)
300 m (984 ft.)400 m (1312 ft.)400 m (1312 ft.)
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
ENGLISH
Page 8
Page 8AXIS T8129 PoE Extender
Examples for medium power PoE cameras that are PoE Class 1 or 2, or
require under 12 watts:
• AXIS M1054 Network Camera
• AXIS P13 Network Cameras (indoor models)
• AXIS Q16 Network Cameras (indoor models)
• AXIS Q1755 Network Camera
• AXIS Q19 Network Camera Series
• AXIS P33 Network Cameras (outdoor models)
PoE Source
PoE switch or
Axis 15 W midspan
(802.3at)
200 m (656 ft.)200 m (656 ft.)300 m (984 ft.)
PoE+ switch (802.3at)Axis 30 W midspan
(802.3at)
Page 9
AXIS T8129 PoE ExtenderPage 9
Examples for full power PoE or PoE+ cameras that are PoE 802.3af class
3 that require more than 12 watts, or 802.3at compliant:
• AXIS P13-E Network Cameras
• AXIS Q16-E Network Cameras
• AXIS Q1755-E Network Camera
• AXIS P55 Network Camera Series
• AXIS Q60 Network Cameras (indoor models)
PoE Source
PoE switch or
Axis 15 W midspan
(802.3at)
not applicablenot applicable
Examples for Custom High PoE cameras:
• AXIS Q60-E Network Cameras
PoE switch or
Axis 15 W midspan
(802.3at)
not applicablenot applicable200 m (656 ft.)*
*use 23AWG or heavier cable (typically Cat 6)
PoE+ switch (802.3at)Axis 30 W midspan
PoE Source
PoE+ switch (802.3at) Axis 30 W midspan
(802.3at)
200 m (656 ft.)
(802.3at)
(together
with Axis 60 W
midspan)
*
ENGLISH
Page 10
Page 10AXIS T8129 PoE Extender
Warranty
For information about Axis' product warranty and thereto related
information, see www.axis.com/warranty
Page 11
PoE Extender AXIS T8129Page 11
Rallonge PoE
Connecteur réseau
Voyants lumineux
Caméra
Rallonge PoE
Commutateur
Injecteur
Max. 100 m (328 pi.)
Max. 100 m
PoE Extender AXIS T8129
Guide d’installation
Vue d’ensemble du matériel
FRAN
Ç
AIS
Page 12
Page 12PoE Extender AXIS T8129
Caractéristiques techniques
Élément
ModèlePoE Extender AXIS T8129
Débit10/100 Mb/s duplex intégral ou semi-duplex
ConnecteursRJ-45 blindé, normes EIA 568A et 568B
Câbles réseauBlindé catégorie 5 (ou supérieure)
Affichage et
indicateurs
ConformitéIEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
FixationMur ou étagère
Environnement Intérieur
ApprobationsFCC partie 15, classe B avec câble FTP, EN 55022 classe B
Conditions
d'utilisation
Stockagede -40 °C à 74 °C (de -40 °F à 165 °F)
Dimension
(H x L x P)
Poids45 g
Caractéristiques
Les voyants DEL sont situés sur le connecteur RJ-45
Voyant d'alimentation : PoE activée (Vert)
Voyant réseau : lien/activité (jaune)
(Émissions), EN 55024 (Immunité)
de -10 °C à 50 °C (de 14 °F à 122 °F)
Humidité maximale relative de 85% (sans condensation)
105 x 40 x 22 mm (4,1 x 1,6 x 0,9 po)
Page 13
PoE Extender AXIS T8129Page 13
Distances maximales pour les sources d'alimentation
Plusieurs rallonges PoE peuvent être branchées tous les 100 mètres pour
couvrir de plus grandes distances. Les chiffres réels dépendent des
conditions d'utilisation. La gamme est supérieure à 24 AWG ou un câble
catégorie 5 ou 6 plus lourd, sauf dispositions contraires.
Exemples pour des caméras alimentées par Ethernet (PoE) faible
puissance (ce qui correspond à une PoE classe 1 ou requiert moins de 6
watts) :
• Série de caméras réseau AXIS M11
• Caméra réseau AXIS 221
• Série de caméras réseau AXIS M30
• Série de caméras réseau AXIS M31-R/-VE
• Série de caméras réseau AXIS M32
• Caméras réseau AXIS P33 (modèles d'intérieur)
• Caméra réseau AXIS 212 PTZ/-V
Source de PoE
FRAN
Ç
AIS
Commutateur PoE ou
injecteur
Axis 15 W (802.3at)
300 m (984 pi.)400 m (1312 pi.)400 m (1312 pi.)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
Page 14
Page 14PoE Extender AXIS T8129
Exemples pour des caméras alimentées par Ethernet (PoE) moyenne
puissance (ce qui correspond à une PoE classe 1 ou 2, ou bien requiert
moins de 12 watts):
• Caméra réseau AXIS M1054
• Caméras réseau AXIS P13 (modèles d'intérieur)
• Caméras réseau AXIS Q16 (modèles d'intérieur)
• Caméra réseau AXIS Q1755
• Série de caméras réseau AXIS Q19
• Caméras réseau AXIS P33 (modèles d'extérieur)
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W
(802.3at)
200 m (656 pi.)200 m (656 pi.)300 m (984 pi.)
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
Page 15
PoE Extender AXIS T8129Page 15
Exemples pour les caméras pleine puissance PoE ou PoE+ qui
correspondent à une PoE 802.3af classe 3 qui requiert plus de 12 watts,
ou est conforme à la norme 802.3at :
• Caméras réseau AXIS P13-E
• Caméras réseau AXIS Q16-E
• Caméra réseau AXIS Q1755-E
• Série de caméras réseau AXIS P55
• Caméras réseau AXIS Q60 (modèles d'intérieur)
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W (802.3at)
non applicablenon applicable200 m (656 pi.)*
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
Exemples pour les caméras à PoE élevée personnalisée :
• Caméras réseau AXIS Q60-E
Source de PoE
Commutateur PoE ou
injecteur Axis 15 W
(802.3at)
non applicablenon applicable200 m (656 pi.)*
Commutateur PoE+
(802.3at)
Injecteur Axis 30 W
(802.3at)
(avec l'injecteur Axis
60 W)
*utiliser un câble de 23 AWG ou plus lourd (habituellement de
catégorie 6)
FRAN
Ç
AIS
Page 16
Page 16PoE Extender AXIS T8129
Garantie
Pour plus d'informations sur la garantie des produits Axis et des
informations générales relatives à celle-ci de consulter le site
www.axis.com/warranty
Page 17
AXIS T8129 PoE-ExtenderSeite 17
PoE-Extender
Netzwerkanschluss
LED-Anzeigen
Kamera
PoE-Extender
Switch
Midspan
Max. 100 m
Max. 100 m
AXIS T8129 PoE-Extender
Installationsanleitung
Hardwareübersicht
DEUTSCH
Page 18
Seite 18AXIS T8129 PoE-Extender
Technische Daten
Element
ModellAXIS T8129 PoE-Extender
Datenrate10/100 Mbit/s Halb-/Vollduplex
AnschlüsseAbgeschirmtes RJ-45, EIA 568A und 568B
Netzwerkkabel Abgeschirmtes Kabel der Kategorie 5 (oder höher)
Display und
Anzeigen
KonformitätIEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
MontageWand oder Regal
UmgebungInnenbereich
ZulassungenFCC Teil 15, Klasse B mit FTP-Kabel, EN 55022 Klasse B
Betriebsbedingungen
Lagerung–40 °C bis 74 °C
Abmessungen
(HxBxT)
Gewicht45 g
Technische Daten
LED-Anzeigen befinden sich auf dem RJ-45-Anschluss
Betriebsanzeige: PoE aktiviert (grün)
Netzwerkanzeige: Verbindung/Aktivität (gelb)
(Strahlung), EN 55024 (Störfestigkeit)
–10 °C bis 50 °C
Relative Luftfeuchtigkeit max. 85 % (nicht kondensierend)
105 x 40 x 22 mm
Page 19
AXIS T8129 PoE-ExtenderSeite 19
Maximale Entfernungen für Stromquellen
Mehrere PoE-Extender können alle 100 Meter verbunden werden, um
größere Entfernungen abzudecken. Die genauen Werte hängen von den
Betriebsbedingungen ab. Die Reichweite beträgt, soweit nicht anders
angegeben, über 24 AWG bei schwereren Cat-5e- oder Cat-6-Kabeln.
Beispiele für PoE-Kameras mit niedrigem Stromverbrauch (PoE-Klasse 1
oder unter 6 Watt Verbrauch):
• AXIS M11 Netzwerk-Kamera-Serie
• AXIS 221 Netzwerk-Kamera
• AXIS M30 Netzwerk-Kamera-Serie
• AXIS M31-R/-VE Netzwerk-Kamera-Serie
• AXIS M32 Netzwerk-Kamera-Serie
• AXIS P33 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS 212 PTZ/-V Netzwerk-Kamera
PoE-Quelle
PoE-Switch oder Axis 15 W
Midspan (802.3at)
300 m400 m400 m
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
DEUTSCH
Page 20
Seite 20AXIS T8129 PoE-Extender
Beispiele für PoE-Kameras der PoE-Klasse 1 oder 2 bzw. mit einem
Verbrauch von unter 12 Watt:
• AXIS M1054 Netzwerk-Kamera
• AXIS P13 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS Q16 Netzwerk-Kameras (Modelle für Innenbereich)
• AXIS Q1755 Netzwerk-Kamera
• AXIS Q19 Netzwerk-Kamera-Serie
• AXIS P33 Netzwerk-Kameras (Modelle für Außenbereich)
PoE-Quelle
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
200 m200 m300 m
PoE+ Switch (802.3at)Axis 30 W Midspan
(802.3at)
Page 21
AXIS T8129 PoE-ExtenderSeite 21
Beispiele für PoE- oder PoE+-Kameras mit voller Leistung, die PoE
802.3af-Klasse 3 entsprechen und mehr als 12 Watt verbrauchen oder
802.3at-kompatibel sind:
• AXIS P13-E Netzwerk-Kameras
• AXIS Q16-E-Netzwerk-Kameras
• AXIS Q1755-E Netzwerk-Kamera
• AXIS P55 Netzwerk-Kamera-Serie
• AXIS Q60 Netzwerk-Kameras (Modelle für Innenbereich)
PoE-Quelle
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
nicht zutreffendnicht zutreffend200 m*
Beispiele für individuell angepasste High PoE-Kameras:
• AXIS Q60-E-Netzwerk-Kameras
PoE-Switch oder
Axis 15 W Midspan
(802.3at)
nicht zutreffendnicht zutreffend200 m* (zusammen
*23 AWG oder schwereres Kabel verwenden (normalerweise Cat 6)
PoE+ Switch (802.3at)Axis 30 W Midspan
PoE-Quelle
PoE+ Switch (802.3at) Axis 30 W Midspan
(802.3at)
(802.3at)
mit Axis 60 W
Midspan)
DEUTSCH
Page 22
Seite 22AXIS T8129 PoE-Extender
Garantie
Die Garantiebedingungen für Axis Produkte sowie weitere Informationen
zum Thema Garantie finden Sie unter www.axis.com/warranty
Page 23
AXIS T8129 PoE ExtenderPagina 23
PoE extender
Connettore di rete
Indicatori LED
Telecamera
PoE extender
Switch
Midspan
Max 100 m
Max 100 m
AXIS T8129 PoE Extender
Guida all'installazione
Panoramica dell'hardware
ITALIANO
Page 24
Pagina 24AXIS T8129 PoE Extender
Specifiche tecniche
Elemento
ModelloAXIS T8129 PoE Extender
Velocità di
trasmissione
dati
ConnettoriRJ-45, EIA 568A e 568B schermati
Cavi di reteCategoria 5 (o superiore) schermati
Display e
indicatori
ConformitàIEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
MontaggioA parete o scaffale
AmbientePer interni
ApprovazioniFCC parte 15, Classe B con cablaggio FTP, EN 55022 Classe B
Condizioni
operative
Condizioni a
magazzino
Dimensioni
(HxLxP)
Peso45 g
Dati tecnici
10/100 Mbps half/full duplex
Gli indicatori LED sono posti sul connettore RJ-45
Indicatore alimentazione: abilitato per PoE (Verde)
Indicatore rete: Collegamento/attività (Giallo)
(Emissioni), EN 55024 (Immunità)
Da -10 °C a 50 °C
Max umidità relativa 85% (senza condensa)
Da -40 °C a 74 °C
105 x 40 x 22 mm
Page 25
AXIS T8129 PoE ExtenderPagina 25
Distanze massime per alimentazioni
Più extender PoE possono essere collegati ogni 100 metri per coprire
grandi distanze. I dati effettivi dipendono dalle condizioni operative. Le
distanze si intendono per cavo 24 AWG, Cat-5e o Cat-6, o di sezione
maggiore, eccetto dove sia specificato.
Esempi di telecamere PoE a bassa potenza (PoE Classe 1 o che richiedono
meno di 6 watt):
• Telecamere di rete serie AXIS M11
• Telecamera di rete AXIS 221
• Telecamere di rete serie AXIS M30
• Telecamere di rete serie AXIS M31-R/-VE
• Telecamere di rete serie AXIS M32
• Telecamere di rete AXIS P33 (modelli per interni)
• Telecamere di rete AXIS 212 PTZ/-V
Fonte PoE
Switch PoE o Axis 15 W
midspan (802.3at)
300 m400 m400 m
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
ITALIANO
Page 26
Pagina 26AXIS T8129 PoE Extender
Esempi di telecamere PoE a media potenza che usano PoE Classe 1 o 2 o
richiedono meno di 12 watt:
• Telecamere di rete AXIS M1054
• Telecamere di rete AXIS P13 (modelli per interni)
• Telecamere di rete AXIS Q16 (modelli per interni)
• Telecamera di rete AXIS Q1755
• Telecamere di rete serie AXIS Q19
• Telecamere di rete AXIS P33 (modelli per esterno)
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
200 m200 m300 m
Switch PoE+ (802.3at)Axis 30 W midspan
(802.3at)
Page 27
AXIS T8129 PoE ExtenderPagina 27
Esempi di telecamere PoE o PoE+ full power che usano PoE 802.3af
classe 3, che richiedono più di 12 watt o che sono conformi allo standard
802.3at:
• Telecamere di rete AXIS P13-E
• Telecamere di rete AXIS Q16-E
• Telecamera di rete AXIS Q1755-E
• Telecamere di rete serie AXIS P55
• Telecamere di rete AXIS Q60 (modelli per interni)
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
non applicabilenon applicabile
Switch PoE+ (802.3at)Axis 30 W midspan
(802.3at)
200 m
*
Esempi di telecamere High PoE personalizzabili:
• Telecamere di rete AXIS Q60-E
Fonte PoE
Switch PoE o
Axis 15 W midspan
(802.3at)
non applicabilenon applicabile200 m* (insieme ad
Switch PoE+ (802.3at) Axis 30 W midspan
(802.3at)
Axis 60 W midspan)
*usare un cavo 23 AWG o di sezione maggiore (generalmente Cat 6)
ITALIANO
Page 28
Pagina 28AXIS T8129 PoE Extender
Garanzia
Per informazioni relative alla garanzia del prodotto AXIS ed ogni altra
ulteriore informazione correlata, di consultare la pagina
www.axis.com/warranty
Page 29
Extensión PoE AXIS T8129Página 29
Extensión PoE
Conector de red
Indicadores LED
Cámara
Extensión PoE
Switch
Midspan
Máx. 100 m (328 pies)
Máx. 100 m
Extensión PoE AXIS T8129
Guía de instalación
Presentación del hardware
ESPAÑOL
Page 30
Página 30Extensión PoE AXIS T8129
Especificaciones técnicas
Artículo
ModeloExtensión PoE AXIS T8129
Velocidad de
datos
ConectoresRJ-45 blindados, EIA 568A y 568B
Cables de redBlindado categoría 5 (o superior)
Pantalla e
indicadores
Cumplimiento
normativo
MontajePared o estante
EntornoPara interiores
Homologaciones
Condiciones de
funcionamiento
Almacenamiento
Dimensiones
(Alt. x Anch. x
Prof.)
Peso45 g (1,6 onzas)
Especificaciones
10/100 Mbps semidúplex/dúplex completo
Los indicadores LED están situados en el conector RJ-45
Indicador de alimentación: habilitado para PoE (verde)
Indicador de red: Enlace/actividad (amarillo)
IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
FCC sección 15, Clase B con cableado FTP, EN 55022 Clase B
(emisiones), EN 55024 (inmunidad)
De -10 °C a 50 °C (de 14 °F a 122 °F)
Humedad relativa: 85% como máximo (sin condensación)
De -40 °C a 74 °C (de -40 °F a 165 °F)
105 x 40 x 22 mm (4,1” x 1,6” x 0,9”)
Page 31
Extensión PoE AXIS T8129Página 31
Distancias máximas para las fuentes de alimentación
Se pueden conectar varias extensiones PoE cada 100 metros para
alcanzar mayores distancias. Las cifras reales dependen de las
condiciones de funcionamiento. El rango es superior a 24 AWG o cable
Cat-5e o Cat-6 más pesado salvo donde se especifique.
Ejemplos de cámaras PoE de baja potencia (que son PoE Clase 1 o
requieren menos de 6 vatios):
• Serie de cámaras de red AXIS M11
• Cámara de red AXIS 221
• Serie de cámaras de red AXIS M30
• Serie de cámaras de red AXIS M31-R/-VE
• Serie de cámaras de red AXIS M32
• Cámaras de red AXIS P3343 (modelos para interiores)
• Cámara de red AXIS 212 PTZ/-V
Fuente de PoE
Switch PoE o Midspan
Axis de 15 vatios
(802.3at)
300 m (984 pies)400 m (1.312 pies)400 m (1.312 pies)
Switch PoE+ (802.3at) Midspan Axis de 30
vatios
(802.3at)
ESPAÑOL
Page 32
Página 32Extensión PoE AXIS T8129
Ejemplos de cámaras PoE de media potencia, que son PoE Clase 1 o 2 o
requieren menos de 12 vatios:
• Cámara de red AXIS M1054
• Cámaras de red AXIS P13 (modelos para interiores)
• Cámaras de red AXIS Q16 (modelos para interiores)
• Cámara de red AXIS Q1755
• Serie de cámaras de red AXIS Q19
• Cámaras de red AXIS P3343 (modelos para exteriores)
Fuente de PoE
Switch PoE o
Midspan Axis de 15
vatios (802.3at)
200 m (656 pies)200 m (656 pies)300 m (984 pies)
Switch PoE+ (802.3at)Midspan Axis de 30
vatios
(802.3at)
Page 33
Extensión PoE AXIS T8129Página 33
Ejemplos de cámaras PoE o PoE+ de potencia total, que son PoE 802.3af
de clase 3 que requieren más de 12 vatios o compatibles con 802.3at:
• Cámara de red AXIS P13-E
• Cámaras de red AXIS Q16-E
• Cámara de red AXIS Q1755-E
• Serie de cámaras de red AXIS P55
• Cámaras de red AXIS Q60 (modelos para interiores)
Fuente de PoE
Switch PoE o
Midspan Axis de 15 vatios
(802.3at)
no aplicableno aplicable200 m (656 pies)*
Ejemplos de cámaras High PoE personalizadas:
• Cámaras de red AXIS Q60-E
Switch PoE+ (802.3at)Midspan Axis de 30
vatios (802.3at)
Fuente de PoE
Switch PoE o
Midspan Axis de 15 vatios
(802.3at)
no aplicableno aplicable200 m (656 pies)*
Switch PoE+ (802.3at) Midspan Axis de 30
vatios (802.3at)
(junto con Midspan
Axis de 60 vatios)
*utilice cable de 23 AWG o más pesado (normalmente, Cat 6)
ESPAÑOL
Page 34
Página 34Extensión PoE AXIS T8129
Garantía
Para información sobre la garantía de productos Axis e información
relacionada, consulte www.axis.com/warranty