1. Read Instructions - All the safety and operating instructions
should be read before the unit is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the unit and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and user instructions should
be followed.
5. Electrical Connections - Only a qualified electrician should make
electrical connections.
6. Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Cable Runs -All cable runs must be within permissible
distance.
8. Mounting - This unit must be properly and securely mounted to
a supporting structure capable of sustaining the weight of
the unit. Accordingly:
a. The installation should be made by a qualified installer.
b. The installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the
unit, taking into account both the composition of the mounting
surface and the weight of the unit. Be sure to periodically
examine the unit and the supporting structure to make sure
that the integrity of the installation is intact. Failure to comply
with the foregoing could result in the unit separating from the
support structure and falling, with resultant damages or injury
to anyone or anything struck by the falling unit.
DOME/HOUSING/ELECTRICAL COMPONENT
WARRANTY INFORMATION
Axis, Incorporated warrants that its domes and housing
sold here under shall be fit for the ordinary purpose for which
said products are intended and shall be free from defects in
material and workmanship for a period of three years from date
of sale to buyer. Note that all electrical components will be
warranted for a period of three years from date of sale to buyer.
Axis makes no other warranty of any kind with respect
to this product, whether expressed or implied, including,
without limitation, the implied warranty of fitness for a particular
purpose.
In the event of a breach of the above warranty, Axis shall,
at its option, repair or replace said product. This is Axis's
sole obligation under this warranty. In no event shall Axis
be liable for any incidental or consequential damages, as
defined in section 2-715 of the Uniform Commercial Code by a
breach of this warranty.
SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS
C AUTION
R ISK OF
ELECTRIC SHOCK !
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
UNPACKING
Unpack carefully. Electronic components can be damaged if
improperly handled or dropped. If an item appears to have been
damaged in shipment, replace it properly in its carton and notify
the shipper.
Be sure to save:
1. The shipping carton and packaging material. They are the safest
material in which to make future shipments of the equipment.
2. These Installation and Operating Instructions.
SERVICE
If the unit ever needs repair service, the customer should contact
Axis (1-800-444-2947) for authorization to return and
shipping instructions.
TECHNICAL SUPPORT
If technical support is needed, Axis has set-up a
line for their customers.
DO NOT OPEN COVERS.
NO USER SERVICEABLE PARTS INSIDE.
The lightning flash with an arrowhead symbol,
with in an equilateral triangle, is intended to alert the
user to the presence of non-insulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point with in an equilateral triangle
is intended to alert the user to presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
technical support
Axis shall repair or replace defective products upon
shipment of products returned prepaid to Axis.
Repairs made necessary by reason of accident, misuse or
normal wear shall be charged at Axis's standard rate.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
AXIS TECHNICAL SUPPORT
1-800- 444-2947
24889
Input Power: 24 VAC
Power Consumption: 1.45Amp Total Consumption
Power Output: 27 Watts Heater/Blower
Up to 8 Watts Camera Power
Tools Required: Phillips Screwdriver
7/16 Wrench or Socket
Electrical Specifications
24VAC 50Watts
Wire
Gauge
Distance
22 20 18 16 14 12
55 90 150 230 270 600
Energía De Entrada: 24 VAC
De Consumo De Energía: 1.45Amp Total Consumption
De Salida De Energía: 27 Vatios De Heater/Blower
Up to 8 Vatios De Energía De la
Cámara fotográfica
Herramientas Requeridas: Destornillador Phillips
7/16 llave o zócalo
Puissance D'entrée : 24 VCA
De Puissance D'Énergie : 1.45Amp Total Consumption
De Rendement De Puissance : 27 Watts De Heater/Blower
Up to 8 Watts De Puissance
D'Appareil-photo Les Outils Ont exigé : Tournevis Phillips
7/16 clé ou douille
Zugeführte Energie: 24 VAC
Leistungsaufnahme: 1.45Amp Total Consumption
Abgabeleistung: 27 Watt Heater/Blower
Up to 8 Watt Kamera-Energie
Werkzeuge Erforderten: Kreuzkopfschraubenzieher
7/16 Schlüssel oder Einfaßung
Poder De Entrada: 24 VAC
De Consumo De Potência: 1.45Amp Total Consumption
De Saída De Poder: 27 Watts De Heater/Blower
Up to 8 Watts De Poder Da Câmera
As Ferramentas Requereram: Chave de fenda Phillips
7/16 de chave ou de soquete
Alimentazione in ingresso Di Entrata: 24 VCA
Di Assorbimento di corrente Di energia: 1.45Amp Total
Consuption
Di Uscita Di Alimentazione: 27 Watt Di Heater/Blower
Up to 8 Watt Di Alimentazione Della
Macchina fotografica
Attrezzi Richiesti: Cacciavite "phillips"
7/16 chiave o di zoccolo
!!