Axion AXN-9905 User's Manual

USER MANUAL

DIGITAL PHOTO FRAME

Model: AXN-9905

Please read these instructions before you operate the unit

Manufacturer of this unit follows a principle of constant improvement and is not held responsible for any changes that are made to the unit nor accepts any liabilities for these changes. Thanks for your choice of our products. CAUTION: Only use the AC adapter included with the digital photo frame, Using any other power adapter will void your frame. Unplug the power cord from the outlet when the digital photo frame is not in use.

Contents:

* Digital Photo Frame * AC Adapter * User Guide * Remote Control

Specifications:

Audio format: Mp3 Photo format: JPEG Power source: DC 9V Power consumption: 8W Operating temperature: 5~35 C Dimensions(W*D*H): 280.0 *213.0 *37.8 mm

MAIN UNIT

1. TFT display(screen)

2. Remote sensor

12 13

567891011

3. Power button

4. Play/Enter button

5. Return button

6. Navigation down button

7. Navigation up button

8. Navigation right button

9. Navigation left button

10. Mode button

11. Snooze/Alarm of button

12. Hanging hole

13. Speaker

14. Bracket

15. SD/MMC/XD/MS slot

16. USB port

17. DC jack

18. Phones jack

REMOTE CONTROL

1. Mode button

2. OSD button

3. Menu button

4. Navigation up button

5. Navigation left button

6. Enter button

7. F.BWD & previous button

8. Navigation down button

9. Volume+ button

10. Mute button

11. Power button

12. Play/pause button

13. Stop button

14. Navigation right button

3 4

5 6

7 8

15. F.FWD & next button

16. Volume- button

Power supply

Plug one end of the AC adaptor into the DC input jack, then plug the other end into AC wall outlet.

Phone jack

For private listening, insert a headphone or earphone into the phone jack. CAUTION: Listening at high power for a long moment could damage users' ears.

USB slot

Insert a USB data traveller into the USB port to enjoy the audio files or pictures. When you need to unplug the USB, please enter the main menu firstly, then unplug the USB data traveller.

SD/MMC/XD/MS

Insert an SD/MMC/XD/MS card into the card slot to enjoy the audio files or pictures.

Snooze/Alarm off button

To sleep an extra several minutes when the alarm comes on, lightly touch the SNOOZE/ALARM OFF button, the alarm will stop for several minutes and comes on again. Press and hold SNOOZE/ALARM OFF button about 3 seconds in normal mode to disable the alarm function. (this button works as described above only when the mode option is set to ALARM enabled.)

Play/pause button

Press PLAY/PAUSE button to pause during playback, press this button again will resume playback.

Basic play

Power on the unit then enter the main menu, the screen shows 8 functions, eg: photo, music, photo + music, setup, calendar, clock, alarm and copy/delete . Insert a USB data traveller or SD/MMC/XD/MS card first, press NAVIGATION BUTTON to select one of the following functions.

Photo

Press NAVIGATION buttons to select photo option, then press ENTER to confirm the selection. After the player read it for several seconds, it begins to browse the picture automatically one by one. When photo in Auto Play Off mode, it enters Thumbnail mode directly. During picture playing, press STOP button, thumbnail mode menu appears on the screen as below. Thumbnail of each title: select the thumbnail by using NAVIGATION buttons and press ENTER to play.

Information: Resolution, created date, rotate, and slide show Rotate: Highlight the rotate option and press ENTER to confirm, then enter the rotate mode, there are three options appear in the bottom of the screen including Rotate it, Reset and return. Use NAVIGATION buttons to select picture you desired to rotate, then press ENTER to rotate it. Select reset to restore the picture. Select return to back the thumbnail mode.

Slide show: Select slide show option to slide the picture one by one. Press NAVIGATION LEFT and NAVIGATION RIGHT buttons to rotate the picture Clockwise and Anti-clockwise respectively.

Press NEXT & Previous buttons on the remote control to skip the picture ahead or backward. Press NAVIGATION DOWN button to flip the picture vertically. Press NAVIGATION UP button to flip the picture horizontally. Press STOP button twice to return the file manager.

Music

Press NAVIGATION buttons to select music, then press ENTER to confirm the selection, a browse menu appears on the screen. When music is in Auto Play On mode, the player begins to play the files automatically, use NAVIGATION UP/DOWN button to highlight desired file, then press PLAY/PAUSE to play selected file.

Photo+Music

Press NAVIGATION buttons to select photo + music function and press ENTER to start slide show the pictures and play the music files synchronously. During picture sliding, to rotate or flip picture by pressing NAVIGATION buttons.

Calendar

Use NAVIGATION buttons to select CALENDAR function and press ENTER to confirm, the calendar will be shown on the display. By now you can adjust the calendar by pressing NAVIGATION BUTTONS. Press STOP button, Use NAVIGATION LEFT/RIGHT button to adjust year, use NAVIGATION UP/DOWN button to adjust month, then press STOP button again, use NAVIGATION LEFT/RIGHT/UP/DOWN button to adjust the day and press ENTER button to confirm. To exit this function by pressing MENU button.

Clock

Use NAVIGATION buttons to select CLOCK Function and press ENTER to confirm, then the current time will be shown on the screen in big characters, and the current date, month, year and week will be shown under the time in small characters. To exit this function by pressing MENU button. *Note: The time will not be exactly when remove the power. You need to reset the time.

Alarm

Use NAVIGATION buttons to select ALARM function and press ENTER to confirm. The options of ALARM as follows: Enable: press NAVIGATION UP/DOWN button to make a selection between the two options(on/off) Set time: select this option to set the alarm time after the alarm is enabled. use NAVIGATION UP/DOWN button to select SET TIME option and press ENTER to confirm, use NAVIGATION LEFT/RIGHT button to highlight the time you desired to set, then use NAVIGATION UP/DOWN button to adjust, press NAVIGATION RIGHT button to confirm and press ENTER To exit the alarm time set. Buzzer will sound at the pre-set alarm time. Exit: select exit option to exit alarm setting.

Copy/Delete

Use NAVIGATION buttons to select Copy/delete function and press ENTER to confirm, select COPY or DELETE to enter the correspond windows to do the file copy or file delete function.

Copy function: when copy function is selected, all JPEG files in the USB data traveller or memory card will be displayed in the file manager. use NAVIGATION UP/DOWN buttons to select the files and press ENTER to confirm, then the selected file will be highlight in a rectangle frame. when the selection is finished, use NAVIGATION buttons to select SAVE to save the selected files into the internal memory of the unit.

Slide show: Select slide show option to slide the picture one by one. Press NAVIGATION LEFT and NAVIGATION RIGHT buttons to rotate the picture Clockwise and Anti-clockwise respectively. buttons on the remote control to skip the picture ahead or backward. Press NAVIGATION DOWN button to flip the picture vertically. Press NAVIGATION UP button to flip the picture horizontally. Press STOP button twice to return the file manager.

Music

Custom setup

OSD language: The OSD language options is depend on the software. Style: select one of following style to display different setup menu style. The option of styles as follows: style1/style2/style3/style4 Repeat mode: select one of following option to do a repeat function: off/ one/ folder/ all. Default: select read to restore the setting. Set time: use NAVIGATION UP/DOWN button to select SET TIME option and press ENTER to confirm, use NAVIGATION LEFT/RIGHT button to highlight the time you desired to set, then use NAVIGATION UP/DOWN button to adjust, press NAVIGATION RIGHT button to confirm and press ENTER To exit the clock time set.

Press NEXT & Previous

Mute: Press the MUTE button, the audio output of the main unit will be shut off; pressing this button again or VOLUME button will resume the audio output.

Volume+ & volume-: Press volume + button to increase the volume, and press volume- button to reduce the volume.

Exit

Select this option to exit the setup menu.

Remote function illustration Power button: Press this button to power on or off the player.

Mode button: Press MODE button once display clock time, press this button

twice display calendar, press this button three times to exit.

OSD button: Press this button, the screen will display parts of information.

Menu: Press MENU button during playback to return the main menu.

Play/pause button: Press PLAY/PAUSE button to pause during playback,

press this button again will resume playback.

Navigation buttons: Press navigation buttons to select the desired items or rotate the picture during picture playback.

Enter button: Press this button to confirm selection.

Stop: Press STOP button to stop during playback. Press PLAY/PAUSE to

resume playback.

F.BWD/previous: Press this button once during play to skip a file or picture backward, press and hold this button during normal playback of or audio files, the playback speed will cycle with each press as:2X, 4X, 8X, 16X, 32X, Normal Press PLAY to resume normal playback.

F.FWD/next: Press this button once during play to skip a file or picture ahead, press and hold this button during normal playback of audio files, the playback speed will cycle with each press as:2X, 4X, 8X, 16X, 32X, Normal Press PLAY to resume normal playback.