PDF created with pdfFactory Pro trial version www.pdffactory.com
Content
A. Contents1
B. Powering and installation1
C. Controls, Indicators, and Connectors2
D. Loading and Playing a Disc3
E. Setup4
F. Basic Operation6
G. Connecting to a TV or another monitor7
H. Specifications7
I. Troubleshooting8
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Regional Coding
Both the DVD player and disc are coded by region. These regional
codes must match in order for the disc to play. If the codes don’t
match, the disc won’t play. This unit’s code is region 1. DVD’s with
other regional codes cannot be played in this unit.
A. Contents
1. 1 x 9’’ LCD Monitor & DVD Player Combo
2. 1 x Remote Control with battery
3. 1 x Audio/Video Cable
4. 1 x AC to DC Adapter
5. 1 x Instruction Manual
6. 1 x Car Cigarette Lighter
B. Powering and installation
1. Powering the system indoors
Plug one end of the AC to DC adapter into the DC Input jack on the
back of the DVD player, then plug the other end into the
100~240V AC power receptacle.
2. Powering the system in a car
Plug one end of the cigarette lighter adapter into the DC Input jack
on the DVD player, then plug the other end into the cigarette lighter
socket.
1
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
C. Controls, Indicators, and Connectors
1. Unit View
1
2
3
4
5
6
7
8
9
10
11
19
12
13
14
15
16
20
1) TV Port
2) Headphone Jack
3) Volume Up/Down Control
4) Brightness Up/Down Control
5) SD Slot
6) Power On/Off Switch
7) LCD Panel Shut Off Switch
8) Menu Button
9) Up/Down/Left/Right Button
10) OK Button
11) Cover Open Button
2221
12) Wide Button
13) Stop Button
14) Previous Button
15) Next Button
16) Play/Pause Button
17) DC 9V Input Jack
18) AV Jack
19) AV In/Out Switch
20) Power Indicated LED
21) Remote Control Sensor
22) Charge Indicated LED
2
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2. Remote Control
18
1) DVD/SD Button
2) DISPLAY Button
3) PREVIOUS Button
4) MENU Button
5) REPEAT Button
6) STOP Button
7) SETUP Button
8) NUMBER Button
9) TV/CATV Button
10) SKIP Button
11) AUDIO Button
12) SUBTITLE Button
13) NEXT Button
14) UP/DOWN/ENTER
/RIGHT(FF)/LEFT(REW)Buttons
15) PLAY/PAUSE Button
16) CH+ Button
17) CH- Button
18) AUTO Button
D. Loading and Playing a Disc
a. After connecting power to the unit, power on “DVD player” with the
power switch. The power indicator will light.
b. Open the disc tray by pressing Open button, and place a disc into
the tray with the label side facing up.
c. Close the tray.The unit will load the disc and start playing.
d. Rotate Brightness+/- and Volume+/- to adjust the LCD’s bright-
ness and the DVD player’s volume.
e. To stop playing a disc, press Stop.
3
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
E. Setup
1. Press SETUP on the remote control.
2. Press direction buttons to select the item you want.
3. Press ENTER to confirm your selection.
4. Press SETUP again to exit the setup.
1. General Setup Page
This page includes:
TV DisplayAngle Mark
OSD Lang Screen Saver Last Memory
a) TV Display
* Normal/PS: When the player outputs signal to a normal TV, a nor-
mal picture is shown on the full screen.
* Normal/LB: When the player outputs signal to a normal TV, a nor-
mal picture is shown on the screen with a black strip at both the top
and bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a
wide picture is shown on the full screen.
b).Angle Mark
* On: During playback of an angle disc, a mark appears on the screen,
press number keys to select different angles.
* Off: The screen will not display the angle mark.
c). OSD Lang
Choose the OSD Language as you desire.
English, French, Spanish
4
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
5
d). Screen Saver
*On: Enables screen saver
NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen.
*Off: Disables screen saver
e). Last Memory
2.Video Quality Setup
Brightness Contrast Hue Saturation
3. Password
The password is used to change the parental control level(Refer
to Preference Setup for details on parental control).
When you use the player for the first time,enter the default password
3308.
4. Preference Setup(available only when there is no disc in the
compartment)
This page includes:
Audio Disc Menu Parental Default
Select Default to restore all original settings, but not affect the parental.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
*On: Open the disc tray, your player remembers where you stopped. If you
close the tray with the same disc loaded, your player starts playing at
the point where you stopped.
*Off: The unit will not return to the last position on the disc.
Select a setting and use LEFT or RIGHT button to adjust:
Note: If the selected language is not available, the player will play and
display on the screen the original recorded language contained in the disc.
Select the parental level you desire using UP or DOWN button for discs
with lock-out function or multiple rating levels. These are listed from the
lowest level to the highest level. Press ENTER button, input the password,
then press ENTER button again to confirm the parental level setting.
F. Basic Operation
PLAY /PAUSE
STOP
NEXT
PREVIOUS
FORWARD/RIGHT
REVERSE/LEFT
UP/DOWN
ENTER
NUMBERS
MENU
REPEAT
DISPLAY
SUBTITLE
AUDIO
SETUP
CH+
CHAUTO
TV/CATV
DVD/SD
Start Play/Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play back
Go back to the previous chapter, track or
scene during play back
Scan forward at 2, 4, 8,16 or 32 times speed
Scan backward at 2, 4, 8, 16 or 32 times
speed
Used for Menu Navigation
Execute item or confirm setting
Select item or setting
Display the main menu of the disc
Repeat playing title, chapter, or track
Display information (title, chapter, track,
time, etc.).
Select the subtitle language and turn it on/
Select the audio language
Display the setup menu to select and set
items, and exit the setup menu
Select next channel
Select previous channel
Search for channels automatically
Convert between TV and CATV
Convert between DVD and SD
off
Note: The relative buttons to the TV function are available if you connect
a TV tuner (not included) to the DVD player.
6
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
G. Connecting to a TV or another monitor
You can also connect the DVD player to a TV to enjoy high quality
stereo sound and picture on another monitor.
1. Slide the AV IN/OUT switch to OUT position. Connect one end of
the supplied A/V cable’s stereo plug into the DVD Player's AV jack,
and connect the other end to the AUDIO INPUT and VEDIO INPUT
jacks on your TV or another monitor(white = left channel, red = right
channel, yellow = vedio) through an additional set of A/V cable
(not included).
2. Slide the AV IN/OUT switch to IN position. Connect one end of the
supplied A/V cable’s stereo plug into the DVD Player's AV jack, and
connect the other end to the A/V OUTPUT jacks on another DVD
player.
H. Specifications
Compatible DISC: DVD/CD/MP3
Signal system: NTSC
Panel size: 9 inch
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Power source: DC 9V
Operating temperature: 5~35°C
Dimensions (W x D x H): 238 x 160 x 39mm
Design and Specifications are subject to change
for product improvement without notice
7
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
I. Troubleshooting
No sound or distorted sound?
Make sure your DVD is connected properly.Make sure all cables are securely
inserted into the appropriate jacks.
Can’t advance through a movie?
You can’t advance through the opening credits and warning information that
appears at the beginning of movies because the disc is programmed to prohibit
that action.
The icon ( ) appears on screen?
The feature or action cannot be completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number that is out of range.
Picture is distorted?
1. The disc might be damaged. Try another disc.
2. It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan?
1. Some discs have sections that prohibit rapid scanning or title and chapter skip.
2. If you try to skip through the warning information and credits at the beginning of
a movie, you won’t be able to. This part of the movie is often programmed to
prohibit skipping through it.
IR sensor inoperative?
1. Verify that the batteries in the remote are fresh.
2. Verify that the remote sensor eye is not obstructed.
3. Verify that the infrared transmitter is affixed over thesensor eye of
the component to be controlled.
Disc won’t play?
1. Insert a disc with the label side facing up.
2. Check the type of disc you put into disc tray.This DVD only plays digital
video discs, audio CDs and MP3s.
Play starts, but then stops immediately?
1. Both the unit and the disc are coded by region. If the regional codes
don’t match, the disc can’t be played. This DVD is Region Number 1.
2. The disc is dirty. Clean it.
3. Condensation has formed. Allow player to dry out.
8
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
America Action, Inc. (“AXN”) Product Warranty
Information
What the warranty covers:
America Action, Inc. (“AXN” ) warrants your AXN products against defects in material and
workmanship during the warranty period from the original date of purchase, subject to the
following terms and conditions. If a product proves to be defective in material or
workmanship during the warranty period, AXN will, at its discretion, repair or replace the
product with a similar product provided the purchaser adheres to certain return
authorization procedures and guidelines.
How long the warranty is effective:
AXN products are warranted for one (1) year for parts and ninety (90) days for labor, starting
from the original date of purchase/invoice.
What brand(s) can be covered under the warranty:
Any “ACTION” and “AXION” branded products sold by America Action, Inc.
Whom the warranty protects:
The warranty is valid only for the original purchaser within the continental of USA.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
B. Repair or attempted repair by anyone not authorized by AXN.
C. Any damage of the product due to shipment.
D. Removal from or installation to the product.
E. Causes external to the product, such as electric power fluctuations or failure.
F. Use of supplies or parts not meeting AXN’s specifications.
G. Normal wear and tear.
H. Battery Leakage.
I. Any other cause which does not relate to a product defect.
3. Cosmetic damage by purchaser, such as markings, discoloration, scratches, dents, gouges
or any other defacement.
4. Physically damaged products by purchaser, such as broken PCB, Housing, damaged LCD
Module.
5. No Defect Found (product returned to AXN as defective but failure is not duplicated by
AXN’s test method).
6. Customer instruction, installation, set up adjustments, or signal reception problems.
7. Rechargeable batteries.
8. Product without proof of purchase. (The proof of purchase should be one of the following
documents: purchase receipt, gift receipt, sales invoice, and packing list that contains the
product model number, price, vendor, and purchase date.)
9. Ninety (90) days after the original purchase date of the AXN product, the customer is
responsible for the shipping fees incurred for the product delivery to and from AXN service
center.
PDF created with pdfFactory Pro trial version www.pdffactory.com
How to get service:
1. For additional information on obtaining an extended warranty service, contact your AXN
dealer or AXN’s Customer Service Department by e-mailing to
customerservice@axionzone.com
To obtain warranty service, you will be required to do one of the following: fill out an online
RMA Request Form, print the form, fill it out and fax it to 1-909-869-5545, or call AXN’s
Customer Service number at 1-909-869-6600. You will be asked to provide the following
information:
A. Customer information (name, day-time phone number, and/or residential address).
B. Proof of your purchase (purchase receipt, gift receipt, sales invoice, and/or packing list).
C. Product model number.
D. Product serial number.
E. A description of the problem.
F. Payment information (If any payment is required, you will be asked to provide this
information beforehand. Currently, we only accept personal check, money order or cashier’s
check. The time for us to clear a personal check is approximately 20 days; 10 days for any
money order or cashier’s check.
2. AXN will contact the customer upon receipt of the RMA Request Form, and will issue an
RMA number if the RMA Request Form is completed and delivered as requested.
3. Please take or ship RMA product to AXN or any AXN authorized service center with RMA
number clearly and marked on the outside of the packing. All RMA products should be
returned in secured packaging, preferably in the original package, with the complete set of
accessories. We recommend that you insure the package in case of loss or damage during
shipping.
4. Upon receiving the RMA product, if the correct RMA number is clearly marked on the
packaging, and if the repair payment is pre-paid or is enclosed with the package, depending
on the condition of the defects, AXN will repair or replace all RMA products, and ship the
product back to the customer.
5. For additional information or the name of the nearest AXN service center, please contact
your AXN dealer or AXN Customer Service.
Before contacting us:
In many cases, your product may not need repair. Before contacting us, please consult the
troubleshooting section in your user’s guide or AXN’s FAQ webs page to see if you can easily
remedy the problem yourself.
AXN technical support services:
During the period of product warranty, we support your basic configuration, setup and
troubleshooting questions; and when necessary, we will provide you with all the instructions on
how to return your product for repair.
For customer service and support inquiries, please call 1-909-869-6600 or e-mail us at
customerservice@axionzone.com
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. AXN SHALL NOT BE LIABLE FOR ANY
PDF created with pdfFactory Pro trial version www.pdffactory.com
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BYAPPLICABLE LAW,ANYIMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
allow limitations on how long an implied warranty lasts, so the above limitations or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
AMERICA ACTION INC.
100 EXCHANGE PL
POMONA, CA 91768
PH: (909) 869-6600
FAX: (909) 869-5545
CONTACTUS@AXIONZONE.COM
HTTP://WWW.AXIONZONE.COM
PDF created with pdfFactory Pro trial version www.pdffactory.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.