User Manual
Outdoor PoE Extender
AVN-PO-EXT22G
PoE extender
A quality product for PoE network point-to-point up to 500m. Works with PoE standards
IEEE802.3af and IEEE802.3at.This device serves as a data switch port that is powered by
PoE, and transmits it further on another 100m together with the data.
Depending on the amount of power consumption, may use up to 4 PoE Extender in the
same chain, thereby increasing transmission distance up to 500m (IEEE802.3af class 1,
see table. “Maximum distance)
Features
• Mini-size, wall mounting
• Requires no external power supply
• Low power consumption, only 2W
• Auto=sensing PoE devices
• Compatibility with 802.3af and 802.3at
Maximum distance
PoE Device (PD)
IEEE802.3af class 1
no more than 4W
IEEE802.3af class 2
no more than 6W
IEEE802.3af class 0&3
no more than 12W
IEEE802.3at
no more than 22W
PoE Injector or Switch
IEEE802.3af (max 15.4W)
400m (3pcs PoE Extender)
300m (2pcs PoE Extender)
200m (1pcs PoE Extender)
Not applicable
PoE Plus Injector or Switch
IEEE802.3at (max 30W)
500m (4pcs PoE Extender)
400m (3pcs PoE Extender)
300m (2pcs PoE Extender)
200m (1pcs PoE Extender)
www.aivonet.com www.aivonet.com
Typical Connection Diagram
Technical Characteristics
Number of channels
Pass Through Data Rates
Power over Ethernet input
Power over Ethernet
Connectors
Network cables
Dimensions
Mounting
Environment
Environmental Conditions
Regulatory Compliance
Electromagnetic
1
10/100/1000 Mbps half/full duplex
Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
Output
Output Power: up to 22W
Shielded RJ-45, EIA 568A and 568B
Shielded category 5 (or higher)
140mm x 40mm x 30mm (W x D x H)
Wall of shelf
Outdoor IP65
Operating Ambient Temperature: -40°C to 75°C
Operating Humidity: Maximum 90%, Non-condensing
Storage Temperature: -40°C to 75°C
Storage Humidity: Maximum 95%, Non-condensing
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
RoHS Compliant, CE, FCC
FCC Part15, Class B
www.aivonet.com
www.aivonet.com