Avycon AVM-PCMT-FE1 Quick Start Guide
CAMERA BRACKET MOUNTING
QUICK START GUIDE
Thank you for purchasing our product. This manual is applicable to the wall
mounting bracket and the ceiling mounting bracket of the fisheye camera.
All pictures in this manual are for reference only.
MOUNTING EXAMPLE
INSTALLATION
Before installation, please make sure the wall or ceiling is strong enough to withstand three times the weight of the camera and the bracket.
Please install your camera and bracket in a dry environment. Here we will introduce the installation of the wall mounting bracket and the ceiling
mounting bracket of the fisheye camera
CEILING MOUNTING
1 2 3
Attach the drill template to the place where you want to
fix the bracket. Then drill the screw holes according to
the drill template.
Tear off the drill template and insert the plastic plugs.
4 5 6
a
Fix the mounting base to the wall with the
screws provided.
Install a to the mounting base according to the
screw thread.
Rubber Plug
Install the sponge and the rubber plug respectively
to the mounting base.
Mount the waterproof ring to b and screw b with the
waterproof ring into a
Sponge
b
Waterproof Ring
7 8 9
Gap
Remove the fixed ring from the gap of the camera
and open the cover of the micro SD card slot.
Insert the micro SD card.
WALL MOUNTING
Fixed Ring
Install the cover of micro SD card slot and
fasten the camera on the the bracket with screws.
1 2 3
Install the fixed ring back to the camera and fix
the bracket with screws.
Rubber Plug
Install the sponge and the rubber plug respectively
to the mounting base.
Sponge
c
Install c to the mounting base according to the
screw thread.
4 5 6
Tear off the drill template and insert the plastic plugs.
7 8 9
Gap
Waterproof Ring
Fix the mounting base to the wall with the
screws provided.
Attach the drill template to the place where you
want to fix the bracket. Drill the screw holes according
to the drill template.
d
Waterproof Ring
Mount the waterproof ring to d and screw d with
the waterproof ring into c
Remove the fixed ring from the gap of the camera
and open the cover of the micro SD card slot.
Insert a micro SD card.
Install the cover of micro SD card slot and fasten the
camera onto the bracket with screws.
Install the fixed ring back to the camera and fix the
bracket with screws.
Loading...