Page 1
ANCP3005Q
PROFESSIONAL Wi-Fi CPE NETWORK BRIDGE
CONTENTS
Quick Start Guide
ANCP3005Q
Installation Guide
ANCP3005Q
FEATURES
• High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset
- Range up to 6 miles away with line of sight
• Can be used to connect remote IP cameras to existing NVR’s / DVR’s
- Supports up to 300Mbps
• Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz
bandwidth in use on most Wi-Fi today.
• Dual 14dBi antennas
• Supports the following operation modes:
Bridge, Access Point, Router and Repeater
• Supports providing PoE power to a single IP camera attached to CPE
• Includes 48V PoE power injector which allows for powering CPE from
up to 330ft. away
• LEDs provide information about system status and signal strength for
alignment in Bridge mode
• Hardware Reset button
• Outdoor Rated down to -40°F
• Supports Pole, Wall or Rack Mounting
DIMENSIONS
• CPE
• Stainless Cable tie
• PoE Power Adapter
SPECIFICATION
ANCP3005Q
CPU
Antenna
Wi-Fi Standards
RF Output Power
RF Sensitivity
RF Frequency
Bandwidth
Physical Ports
LED Indicators
Power
Power Consumption
Installation Methods
Product Dimensions
Net Weight
Working Environment
Storage Environment
Qualcomm AR9344 560Mhz CPU
SE2576L PA Chipset - 64MB DDR2 / 16MB SPI
Integrated Dual 14dBi Antennas
IEEE802.11a/an
200mW (23dBm)
-96dBm
802.11a/n: 5.180Ghz - 5.825Ghz
300 Mbps
1 x 10/100 Mbps WAN Ethernet Port
1 x 10/100 Mbps LAN Ethernet Port
1 x Toggle switch for PoE output for IPC
1 x Reset Button
Power / WAN / LAN / Wi-Fi
Level Signal Strength
PoE 802.3at/af
Adapter: 48V PoE Power Adapter
<8W
Pole Mounting, Wall Mounting or Rack Mounting
10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm)
0.7lbs
-40
-58
• Power Cord
• Installation Guide
• Quick Start Guide
˚F ~ 131˚F / 10% ~ 90% RH, Non-condensing
˚F ~ 167˚F / 5% ~ 90% RH, Non-condensing
3.1” (80mm)
10.2” (262mm)
2.1” (53mm)
949-752-7606 www.avycon.com info@avycon.com
Copyright © Avycon All Rights Reserved. Design and specifications are subject to change without notice.
Loading...