Page 1
ANAP3002Q
PROFESSIONAL Wi-Fi ACCESS POINT
CONTENTS
Installation Guide
ANCP3005Q
FEATURES
• Indoor 2.4ghz Wi-Fi Access Point
• Supports bandwidth of up to 300 Mbps
• Supports the following operation modes: Residential Access Point,
Router, Commercial Access Point (managed with the ANAC100
[provide link to ANAC100])
• Easy wireless setup mode allows for configuration with any mobile
device or computer
• Supports the following wireless encryption:
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
• Includes 48V PoE power injector which allows for powering AP
from up to 330ft. away
• Configurable Tri-color LED ring to indicate power and network activity
• Hardware Reset Button
• Supports Wall or Ceiling Mounting
DIMENSIONS
• APAP3002Q
• Cat5e Ethernet Cable
• PoE Power Adapter
SPECIFICATION
ANAP3002Q
Chipset
Ethernet Standard
Wi-Fi Frequency
Maximum Users
RAM
Flash
Bandwidth
Power Amplifier
Hard Buttons
Power Supply
Wireless Encryption
Max. Transmit Power
Antenna
LED Indicator
Dimensions
Work Environment
Storage Environment
OS
Operating Modes
Qualcomm QCA9531
IEEE802.11n/g/b , IEEE802.3af
2.4 Ghz - 2.4835 Ghz
85 Users
64MB DDR2
16MB SPI
300Mbps
SE2576L x 2
Reset
48V PoE Power Adapter
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
110mW
2 x 3dBi Loop Antenna
Tri-Color RGB
7.9” x 7.9“ x 0.7” (200mm x 200mm x 18mm)
14˚F ~ 149˚F, 10% ~ 90% RH, Non-condensing
-40˚F ~ 158F, 5% ~ 95% RH, Non-condensing
Linux / OpenWRT
AP, Repeater, Router, WDS
• Power Cord
• Screws and anchors
• Quick Start Guide
7.9” (200mm)
7.9” (200mm)
0.7” (18mm)
949-752-7606 www.avycon.com info@avycon.com
Copyright © Avycon All Rights Reserved. Design and specifications are subject to change without notice.
Loading...