![](/html/19/19d8/19d8d2667931b69addcd604c98535691809a94087cf2c37ce2c896f9605ab27c/bg1.png)
Utility Distribution System
Available for Electrical, Gas and
Kettle/Braising Pan Integral Arm
Usage
Utility Raceways
Description:
The R-series Raceway is a Utility Distribution System
comprised of a stainless steel sheet metal housing enclosing
electrical and plumbing services that provide connections
for individual appliances. Raceways with plumbing services
are Listed by Underwriters Laboratories (UL) as Commercial
Appliance Outlet Centers. Raceways with only electrical
services are Listed by UL as Multi-outlet Assemblies. These
raceways are intended primarily for use with cooking batteries,
or cooking appliance line-ups, on both sides of the Raceway,
or with appliances along one side and an aisle on the other
side. Individual Point-of-use connection plates are located on
the bottom along the length of the raceway.
Specifications:
Dimensions: Horizontal Chase Width: 12”, Height: 18” – 30” plus 6” peaked top, Length: 4’-0” to 40’-0”. Service Towers Width:
12” Height: Finished Floor to Exhaust Hood or Finished Ceiling, Length: 18” Nominal to 42” Nominal. Intermediate Pedestals
Width: 10” Height: Finished Floor to bottom of Horizontal Chase, Length: 10”. Construction: 430-series Stainless Steel. Removable panels held in place with threaded fasteners. Electrical Data: 50 to 225 amperes. 120/208-240/480 volts, single or
three-phase. Water: 150 psig & 140° F (60° C) maximum. Gas (Natural gas or LP): 1.25 psig.
R Series
model RID
Standard Features: Optional Accessories:
• End mounted panel-board in service
tower-125 amp maximum with
out main service breaker, 100 amp
maximum with main service breaker.
Maximum twenty-four (24) circuit
breaker pole spaces available [Four
(4) positions used by main service
breaker with shunt-trip, 120/208-240V]
• Receptacle or exible liquid tight
metal conduit (pigtail) mounted on
5x9” connection plates located along
the bottom of the length of the
horizontal chase
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
• Ground fault circuit interrupter for
15 & 20 amp, 120/1, straight blade
receptacles
• Copper hot and cold water supply
lines, if required
• Black iron gas supply line, if required
• Quarter-turn shut-off valves on
all individual connections
• Quarter-turn shut-off valves on
individual steam supply and
condensate return connections
• 2” High collar at top of service tower
allows ±1/2” vertical adjustment to
compensate for oor and/or exhaust
hood mounting irregularities
• Steam purging system
Avtec Utility Raceways, Page 5
PP SPEC1049 Rev. A
Revised 11/07
![](/html/19/19d8/19d8d2667931b69addcd604c98535691809a94087cf2c37ce2c896f9605ab27c/bg2.png)
Optional Accessories:
Model RID
Quick-disconnect ttings for individual
gas connections in addition to quarter-turn shut-off valves for movable
appliances
Quick-disconnect ttings for individual
water connections in addition to quarter-turn shut-off valves for movable
appliances
Vent light switch in service tower
Duplex convenience outlet in
Service tower(s)
Gas delay reset (GDRI)
120V AC re-fuel shut-off solenoid
valve(s) for gas supply. 1 1/2” And
smaller located in service tower(s)
(2” and larger are remotely located)
Ventilation system control panel
Temperature/pressure gauge at water
incoming service location
Security package (includes):
• exposed fasteners to be tamper-resistant, pin-in-head torx-head, shipped
loose and installed in eld
• hinged doors equipped with eye for
customer-supplied padlock
Dormer mounted faucet or pot ller
Dormer mounted point-of-use
connection plate
Optional Electrical:
100 To 225 amperes ,480Y/277 volts,
three-phase, Four-wire. Eighteen
(18) single-pole positions (100 amp
maximum)
Main service breaker with shunt trip
available. (Does not use any of the
available branch breaker positions.)
Front, Top & Side Views
Front, Top & Side Views
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.