Avtec CRGN User Manual

Conveyors Roller Conveyor Systems model CRGN

Description:

Gravity roller conveyor sections utilized to move trays/
racks in the dish room environment. Rollers can be
utilized for drop-off of trays, moving racks into and out
of rack type dish machines or various other dish room
applications. Rollers are available in removable sections
and rollers can be spaced varying distances apart,
depending on the product being conveyed. Rollers are
available in PVC plastic or stainless steel.

Specifications:

Provide AVTEC model GRNP (gray PVC) (stainless steel) (straight) (curved) roller sections, (17”) (21 ½”) (26 ½”) wide as shown
on drawings. Roller shall consist of 1.9” diameter (PVC) (stainless steel) tubing with stainless steel bearings mounted in lift out
sections. Removable sections shall be supported above dish table in recessed cavity. Rollers shall have anodized aluminum
axles for maximum corrosion resistance and shall be mounted with stainless steel hardware.

Standard Features:

• 11 Ga side rails

• Easily removable sections

• 7/16” Hex aluminum shafts, tapped
for 5/16-18 x 5/8” deep,
anodized clear

• Roller sections, when applicable,
are placed on pins for easy
cleaning

• Interroll rollers with S/S bearings

• Three rollers per shaft, instead of
one, for all turns

• 1 5/8” S/S legs with 1.5”
cross-members

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Optional Accessories:

S/S rollers can be substituted for PVC
Skate wheels substituted for rollers:

• 1.9Dia skate wheels

• Individually bolted through work surface

• On 3” to 5” centers
Pitched work surface to drain
Open pan construction
Rollers sections on work surface instead
of pins
Spring loaded shafts
Blue rollers
Rollers with side rails only
Pitched down from power rollers
Hinged roller bridge, counter weighted
for easy lifting

Avtec Conveyors, Page 10

PP SPEC1060 Rev. A

Revised 11/07

Front, Top & Side Views

2.000

14GA S/S (TYP.)

4.500

1.500 24.875

28.375

10.000

1 5/8" S/S TUBING

10.000

21.468

UNDERSHELF

SECTION VIEW

A

31.125

34.250

OPTIONAL UNDERSHELF

1.9ÿ PVC ROLLERS

DISHMACHINE CONNECTION

(PER CUT CHEET)

PLAN VIEW

CRGN

30.875

Model CRGN

BUILT IN GUIDE RAIL

1 1/2" WASTE

22.000

R36.000

117.875

A

1.9ÿ PVC ROLLERS

1.500 24.875

14GA S/S (TYP.)

4.500

31.125

10.000

34.250

UNDERSHELF

SECTION VIEW

28.375

21.468

2.000

A

1 5/8" S/S TUBING

OPTIONAL UNDERSHELF

10.000

OPTIONAL DISH MACHINE MOUNTED

LIMIT SWITCH (PROVIDED BY

DISH MACHINE MANUFACTURER)

28.375

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.