Avtec CITW User Manual

Conveyors Slat Belt Conveyor System model CITW

Description:

The AVTEC Model CITW is a tray assembly conveyor utilizing
an interlocking style plastic slat connected by stainless steel
pins to move trays through a tray assembly system. Belt is
returned in self-cleaning slider pan for easy cleaning and
maintenance. The model CITW is used for straight applications
only. Unit is provided with or without an automatic detergent
injection wash system.

Specifications:

Provide AVTEC NSF Approved tray make-up conveyor system, Model CITW. Unit shall be the size and shape as shown in project drawings.
Top and slide bed shall be constructed of 14 gauge 300 series stainless steel with #4 mill nish. Drive housing shall be of uni-body
construction, completely constructed of 300 series stainless steel. Legs shall be 1 5/8” diameter stainless steel with 1 ½” diameter welded
cross members for support. Drive motor to be stainless steel (½)(¾) hp, 208/3 and shall be water resistant. Unit is to include wash housing
with strategically designed spray jets for cleaning of both sides of belt. Belt returns on self-cleaning return track system. Detergent designed
to drip on belt for maximum exposure to cleaning action. Wash housing is designed with large access panels for inspection of wash chamber
and comes complete with stainless steel latches to seal openings and removable scrap basket for waste. Housing is to be provided with
door safety shut-off switch. Belt is to be interlocking style gray plastic on continuous length UHMW tracks, driven by a UHMW sprocket
mounted on stainless steel bearings and shafts utilizing slip collar in lieu of keyways. Tail section includes auto-tensioning device to keep
constant equal tension on the belt. Motor control panel to be designed with main service disconnect switch, variable speed controls and of
sealed water-tight construction. Conveyor is designed to include a photo electric accumulation switch at terminal end of unit to shut down
system when conveyor is full.

Standard Features:

• S/S drive housing

• Door conveyor shut off
safety switch(s)

• Removable scrap basket in
drive and tail housings

• Access panel for wash housing

• 1 ½” Drain in drive

• S/S drive motor

• Anti-jam safety switch at
drive opening

• Detergent pump housing

• Auto belt tensioner

• 1 5/8” S/S legs with 1 1/2”
S/S crossmembers

• Work surface: 14 ga S/S construction,
fully welded and polished.

• 1/2 HP S/S drive motor

• Interlocking belt slats, gray

• UHMW drive sprockets

• Self cleaning top and return tracks

• Lifetime drive bearings

• Tail cover

• Belt wash, with auto wash option
(PLC programmed timer for optimal
cleanness and performance)

• Main control panel with start/stop,
wash selector, belt speed, limit
switch, main disconnect

• Limit switch

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Optional Accessories:

Additional start/stop box(s)
Post mounted tubular overshelf
Starter station
Hinged tail access door
Modular energy distribution system
Momentary run foot switch
Side skirting:
Hinged
Removeable

Avtec Conveyors, Page 7

PP SPEC1057 Rev. A

Revised 11/07

Front, Top & Side Views

Model CITW

HINGED TAIL ACCESS

MCOE

1 1/2" WASTE

SIDE SKIRTING

A

ELEVATION VIEW

PLAN VIEW

RECESSED MAIN CONTROLS

DETERGENT PUMP HOUSING

1

1/2 H&C WATER

DETERGENT PUMP

HOUSING

1

1 1/2" WASTE

LIMIT SWITCH

ANTI-JAM

RECESSED MAIN CONTROLS

SECTION VIEW

MCOE

A

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.