Avtec CISW User Manual

Conveyors Slat Belt Conveyor System model CISW
Description:
The AVTEC Model CISW is a soiled tray/dish return conveyor utilizing an interlocking style plastic slat connected by stainless steel pins. The model CISW is used to return soiled trays from the dining room to the dish room or to move dishes or racks within the dish room. Belt is returned in self-cleaning slider pan for easy cleaning and maintenance. The model CISW is used for straight applications only and cannot make turns. Unit is provided with automatic detergent injection wash system.
Specifications:
Provide AVTEC NSF Approved soiled tray/dish conveyor system, Model CISW. Unit shall be integral with dish table and tray scrapping system and will be size and shape as shown in project drawings. Top and slide bed shall be constructed of 14 gauge 300 series stainless steel with #4 mill nish. Drive housing shall be of uni-body construction, completely constructed of 300 series stainless steel. Legs shall be 1 5/8” diameter stainless steel with 1 ½” diameter welded cross members for support. Drive motor to be stainless steel (½)(¾) hp, 208/3 and shall be water resistant. Motor is to be located in separate housing from wash tank compartment. Housing is to be provided with door safety shut-off switch. Unit is to include wash housing with strategically designed spray jets for cleaning of both sides of belt. Belt returns on self-cleaning return track system. Detergent designed to drip on belt for maximum exposure to cleaning action. Wash housing is designed with large access panels for inspection of wash chamber and comes complete with stainless steel latches to seal openings and removable scrap basket for waste. Belt is to be interlocking style gray plastic on continuous length UHMW tracks, driven by a UHMW sprocket mounted on stainless steel bearings and shafts utilizing slip collar in lieu of keyways. Tail section includes auto-tensioning device to keep constant equal tension on the belt. Motor control panel to be designed with main service disconnect switch, variable speed controls and of sealed water-tight construction. Conveyor is designed to include a photo electric accumulation switch at terminal end of unit to shut down system when conveyor is full.
Standard Features:
• S/S drive housing
• Door conveyor shut off safety switch(s)
• Removable scrap basket in drive and tail housings
• Access panel for wash housing
• 1 ½” Drain in drive
• S/S drive motor
• Anti-jam safety switch at drive opening
• Detergent pump housing
• Auto belt tensioner
• 1 5/8” S/S legs with 1 1/2” S/S crossmembers
• Work surface: 14 ga S/S construction, fully welded and polished.
• 1/2 HP S/S drive motor
• Interlocking belt slats, gray
• UHMW drive sprockets
• Self cleaning top and return tracks
• Lifetime drive bearings
• Tail cover
• Belt wash, with auto wash option (PLC programmed timer for optimal cleanness and performance)
• Main control panel with start/stop, wash selector, belt speed, limit switch, main disconnect
• Limit switch
1055 Mendell Davis Drive, Jackson, MS 39272 888-994-7636, unifiedbrands.net
Please reference our website for the most updated product information and specifications.
Optional Accessories:
Auto (APRs) or manual (MPRs) plate rinses Additional start/stop box(s) Auto-index Wall or post mounted overshelf Wall or post mounted tubular overshelf Hose reel: 30’ hose 50’ hose Laminated or S/S panels at drop off Sight and sound barrier Security door Hinged tail access door Side skirting: Hinged Removeable
Avtec Conveyors, Page 6
PP SPEC1056 Rev. A
Revised 11/07
Front, Top & Side Views
Model CISW
A
OVERSHELF
LIMIT SWITCH
14" TO 18" TYP.
PLAN VIEW
POST MOUNTED OVERSHELF
16" MAX.
SELF CLEANING TRACKS
H-FRAME SINK BRIDGE
TRANSFER EDGE
SECTION VIEW
A
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered trademarks in the United States [and various other countries] of Unified Brands, a wholly-owned subsidiary of Dover Corporation.
Loading...