Avtec CFBS User Manual
Conveyors Fabric Belt Conveyor System model CFBS
Description:
The AVTEC Model CFBS is a fabric belt conveyor utilized for
tray or plate assembly lines. The slim-line low prole design
allows for only an 8 5/8” conveyor housing. The conveyor
uses a PVC coated fabric belt to move trays or plates through
the tray assembly or banquet plating line. Belt material is
durable and easily cleaned. Unit may be specied with a
Modular Energy Distribution System for powering ancillary
equipment, such as hot food tables or refrigerated units. This
design is utilized for lengths up to 15 feet in length.
Specifications:
Provide AVTEC tray/plate make-up conveyor system, Model CFBS. Unit shall be the size and shape as shown in project drawings. Top and
slide bed shall be constructed of 14 gauge 300 series stainless steel with #4 mill nish. Drive housing shall be of uni-body construction,
completely constructed of 300 series stainless steel. Legs shall be 1 5/8” diameter stainless steel with 1 ½” diameter welded cross
members for support. Unit is driven by a 4 1/2” diameter drive pulley mounted on stainless steel bearings and shafts utilizing slip collar in
lieu of keyways. No chain or sprockets required. Belt returns on support roller return system. Low-prole housing includes belt scraper and
is designed with access panels for inspection of chamber and comes complete with stainless steel latches to seal openings and removable
scrap basket for waste. Belt is to be 10.75” wide PVC coated fabric material, easily cleaned and connected with stainless steel pin assembly.
Tail section includes auto-tensioning device to keep constant equal tension on the belt. Motor control panel to be designed with main
service disconnect switch, variable speed controls and of sealed water-tight construction. Conveyor is designed to include a photo electric
accumulation switch at terminal end of unit to shut down system when conveyor is full.
Standard Features:
• Tail auto-belt take-up
• Hinged safety plate on drive
opening
• 1 5/8” S/S legs with 1 1/2”
S/S crossmembers
• Fabric belt scraper with removable
scrap basket
• Limit switch
• Main control panel with start/stop,
speed control, limit switch, and
main disconnect
• PVC return rollers.
• 16 Ga S/S construction
• 4.5” High output belt drive roller the belt rides on an anti-spill raised
edge, for easier cleaning and better
performance
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Optional Accessories:
Momentary run foot switch
Modular energy distribution system
Casters, bullet or ange feet
Cord and receptacle
Floor box
(2) 20 Amp duplex convenience outlets
with water proof cover on each end
Stainless steel lift-off cover for covering
unit with handles
Starter Station
Avtec Conveyors, Page 2
PP SPEC1052 Rev. A
Revised 11/07
Front, Top & Side Views
Model CFBS
B
ACCUMULATION SWITCH
8 5/8"
2"
REMOVABLE S/S SCRAP TRAY
10"
1 1/2" S/S CROSSMEMBERS
PLAN VIEW
1 5/8" S/S LEG
ELEVATION VIEW
(MAX OF 18')
A
RETURN IDLERS
(7" MIN.)
16GA S/S SLIDEBED
OPTIONAL CORD & PLUG
1'-8 1/2"
AUTO TAIL TAKE-UP
RECESSED CONVEYOR CONTROLS
(2) 120V, 20A OUTLETS,
W/WATER PROOF SNAP COVERS
5" SWIVEL CASTERS W/BRAKES
C
A
1'-8 1/2"
CONVEYOR CONTROL STATION
SECTION VIEW
ANTI-SPILL RAISED EDGE (SEE DETAIL)
RETURN IDLERS
RECESSED 120V RECEPTACLE
W/WATER PROOF COVER (2)
B
1'-8 1/2"
2" 2"
10 1/2"
2"
CONVEYOR CONTROL STATION
MAIN DISCONNECT
ON
OFF
3
OFF0AUTO
2
4
1
5
6
START STOP
SPEED
ACCUM SWITCH
CONTROL
120 KENDALL POINT DR. OSWEGO, IL 60543-8898
SECTION VIEW
8 5/8"
3"
(2) 120V, 20AMP, OUTLETS
W/ WATER PROOF SNAP COVERS
C
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Loading...