Avtec CFBK User Manual
Conveyors Fabric Belt Conveyor System model CFBK
Description:
The AVTEC Model CFBK is a fabric belt conveyor utilized
for tray or plate assembly lines. The conveyor uses a PVC
coated fabric belt to move trays or plates through the
tray assembly or banquet plating line. Belt material is
durable and easily cleaned. Unit may be specied with a
Modular Energy Distribution System for powering ancillary
equipment, such as hot food tables or refrigerated units.
This design is utilized for lengths up to 30 feet in length.
Specifications:
Provide AVTEC UL Listed and NSF Approved tray/plate make-up conveyor system, Model CFBK. Unit shall be the size and shape as shown
in project drawings. Top and slide bed shall be constructed of 14 gauge 300 series stainless steel with #4 mill nish. Drive housing shall
be of uni-body construction, completely constructed of 300 series stainless steel. Legs shall be 1 5/8” diameter stainless steel with 1 ½”
diameter welded cross members for support. Drive motor to be stainless steel 1/2 hp, 208/3 and shall be water resistant. Belt returns on
support roller return system. Housing includes belt scraper and is designed with large access panels for inspection of chamber and comes
complete with stainless steel latches to seal openings and removable scrap basket for waste. Housing is to be provided with door safety
shut-off switch. Belt is to be 10” wide PVC coated fabric material, easily cleaned and connected with stainless steel pin assembly. Belt is
driven by a chain driven 6” diameter drive pulley and s/s sprocket mounted on stainless steel bearings and shafts utilizing slip collar in lieu
of keyways. Tail section includes auto-tensioning device to keep constant equal tension on the belt. Motor control panel to be designed with
main service disconnect switch, variable speed controls and of sealed water-tight construction. Conveyor is designed to include a photo
electric accumulation switch at terminal end of unit to shut down system when conveyor is full.
Standard Features:
• Tail auto-belt take-up
• Hinged safety plate on drive opening
• 1 5/8” S/S legs with 1 1/2” S/S
crossmembers
• Fabric belt scraper with removable
scrap basket
• Limit switch
• Main control panel with start/stop,
speed control, limit switch, and
main disconnect
• PVC return rollers.
• 14 Ga S/S construction
• S/S ½ HP Motor with
S/S drive housing
• Drive door shut off safety switches the belt rides on an anti-spill raised
edge, for easier cleaning and better
performance
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Optional Accessories:
Momentary run foot switch
Modular energy distribution system
Casters, bullet or ange feet
Cord and receptacle
Floor box
Stainless steel lift-off cover for covering
unit with handles
Starter Station
Avtec Conveyors, Page 1
PP SPEC1051 Rev. A
Revised 11/07
Front, Top & Side Views
THROUGH-BEAM
ACCUMULATION SENSOR
Model CFBK
D
(30' MAX LENGH)
10" STANDARD
BELT SPEED 5 TO 30 FT/MIN.
(7.5" MIN.)
C
CONVEYOR CONTROLS
10 3/8"
1'-8"
1'-4 3/4"
SPRING LOADED SAFETY PLATE
PLAN VIEW
CFBK WITH MULTI-OUTLET
POWERCHAIN ASSEMBLEY
A
OPTIONAL FIELD JOINT
AUTOMATIC BELT TAKE-UP
10 3/8"
10"
2'
DRIVE
ELEVATION VIEW
A
RECESSED CONTROLS
DRIVE HOUSING
1'-8"
1'-4 3/4"
120 KENDALL POINT DRIVE, OSWEGO, IL 60543
(630) 851-4800 FAX (630) 851-5777
3
2
STOP SPEED CONTROL
START
SECTION VIEW
ANTI-SPILL RAISED
BELT DECK (SEE DETAIL)
1'-8"
10"
MAIN DISCONNECT
I ON
5
ONOFF
4
6
7
8
0 OFF
1
9
LIMIT SWITCH
CONVEYOR CONTROLS
10 3/8"
10"
C
SECTION VIEW
D
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Loading...