Avtec CCTN User Manual

Conveyors Cordveyor Conveyor System model CCTN

Description:

The AVTEC Model CCTN is a tray assembly conveyor utilizing
a dual poly cord to transport trays through a tray assembly
system. Dual poly cords are easy to maintain and keep
clean. Turns are accomplished by use of micro-roller
sections, which take the strain off of the cord and relieve
stretching and extend cord life. Unit is available with or
without wash system.

Specifications:

Provide AVTEC NSF Approved tray assembly conveyor system, Model CCTN. Unit shall be size and shape as shown in project drawings. Top
and slide bed shall be constructed of 14 gauge 300 series stainless steel with #4 mill nish. Drive housing shall be of uni-body construction,
completely constructed of 300 series stainless steel. Legs shall be 1 5/8” diameter stainless steel with 1 ½” diameter welded cross mem­bers for support. Drive motor to be stainless steel (½)(¾) hp, 208/3 and shall be water resistant. Motor is to be located in separate housing
from wash tank compartment. Housing is to be provided with door safety shut-off switch. Unit is to include wash housing with perforated
stainless wash arm for cleaning of cords and separate detergent tank. Housing is to be provided with cord wipers to clean and dry cords
upon exit from housing. Cords are to be ½” blue/green reinforced polyurethane, riding in continuous length UHMW tracks, driven by stainless
steel pulleys mounted on stainless steel shafts and bearings. Corners are to be designed with Micro roller turn assemblies to relieve strain
on the cords. Roller assemblies are designed to be easily removable for cleaning. Drive section includes auto-tensioning device to keep
constant equal tension on the cords. Motor control panel to be designed with main service disconnect switch, variable speed controls and of
sealed water-tight construction. CordVeyor is designed to include a photo electric accumulation switch at terminal end of unit to shut down
system when conveyor is full.

Standard Features:

• S/S drive housing

• Door shut off safety switch(s)

• Removable scrap basket in

• 3/4 HP S/S drive motor (typ. for over
60’ with one or more turns)

• Fixed side skirting

drive housing

• 1 ½” Drain in drive

• S/S drive motor

• Main control panel with start/stop,
wash selector, belt speed, limit
switch, main disconnect.

• Limit switch

• Cord take-up bracket

• 1 5/8” S/S legs with 1 1/2”
S/S crossmembers

• Work surface: 14 ga S/S construction

• UHMW guide strip for cord

• 1/2” Blue/green reinforced poly-cord

• 1/2 HP S/S drive motor (typ. for under
60’ with one turn)

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Optional Accessories:

Tail loading deck (the drip pan is not
offered or required with this option)
1 ½” Drains over drive unit, at tray
drop-off, or intermediate
90 and 45 degree micoturns
Additional start/stop box(s)
Momentary run foot switch
Overshelf
Tubular overshelf
Starter station
Modular energy distribution system
Belt wash, with auto wash option
Detergent pump housing

Avtec Conveyors, Page 4

PP SPEC1054 Rev. A

Revised 11/07

Front, Top & Side Views

ELEVATION VIEW

1 5/8" S/S LEGS

Model CCTN

REMOVABLE SCRAP BASKET

RECESSED CORDVEYOR CONTROLS

24.000
DRIVE

A

17.000 LOADING DECK

19.000 8.750

14GA S/S WORK SURFACE

8.750

1 5/8" S/S LEGS

10.000

SECTION VIEW

B

PLAN VIEW

1 1/2" S/S CROSSMEMBERS

B

15.000 UNLOADING DECK

C

LIMIT SWITCH

A

120 KENDALL POINT DRIVE, OSWEGO, IL 60543
[phone] FAX [phone]

SECTION VIEW

MAIN DISCONNECT

I ON

5

OFF ON

436

7

2

8

0 OFF

9

1

START

SPEED CONTROLSTOP

LIMIT SWITCH

TM

CORDVEYOR CONTROLS

C

RECESSED MAIN CONTROLS

MCOE

1 5/8" S/S LEGS

SHOWN WITH OPTIONAL
DETERGENT PUMP HOUSING
FOR BELT WASH

ELEVATION VIEW

31.125

A

DRIVE

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.