Avtec BLEH Service Manual
Project: Item
#
Prepared for: Date:
Island Utility Distribution System Model IL * *
APPLICATION DATA
The Loco UDS is a low cost electrical chase and/or plumbing
manifold ready to be mounted on finished floor. It provides a
sanitary method of distributing utilities to a battery of equipment,
and flexibility for change. Matching AVTEC electric and plumbing
connectors are available, or equipment may be direct connected.
Optional mechanical or electrical gas valves may be supplied to
shut off gas upon discharge of fire suppression system mounted
on Loco Ventilator.
DESIGN FEATURES
• U. L. Listed. Complies with all national codes.
• Pre-engineered, S/S construction.
• Flexibility for change
• Ease of cleaning and service
• S/S Service Tower Each End
OPTIONS AND ACCESSORIES
• Matching Cord Sets
• Matching Plumbing Connectors
• Gas Solenoid Valve
• Mechanical Gas Valve
• Manual Gas Shut Off Valve
AVTEC INDUSTRIES INC. 120 KENDALL POINT DR. OSWEGO, IL 60543 [630] 851-4800
** MODEL NUMBER GUIDE
Island model IL is available with the following services. All
models are 12" high x 6" deep, except models I LEO and ILGO,
which are 6" high. Lengths are in 6, 9 and 12 ft. increments.
Model IL * *
EO = Electric only GH = Gas, hot water
GO= Gas only GC = Gas, cold water
EG = Electric, gas GW = Gas, HW, CW
EH = Electric, hot water UH = Electric, gas, hot water
EC = Electric, cold water DC = Electric, gas, cold water
EW = Electric, HW, CW UW = Electric, gas, HW, CW
SPECIFICATIONS
Provide AVTEC U.L. Listed, island type, LOCO UDS System,
Model No. __________ with (electric chase)(1 1/2" N.P.T. gas
manifold) (1/2" N.P.T. (hot) (and) (cold) water manifold). System
shall be (6")(12") hiqh x 6" wide x __ft. long O/A, in (6')(9')(12')
increments, and constructed of (#304) (#430) stainless steel with
#4 finish. Provide service tower each end and tubular legs with
flanged feet at each field joint. Provide NEMA receptacles and
plumbing connections for (3/4" gas) (1/2" hot water) (1/2" cold
water) where indicated on drawing.
Also Provide:
Matching cord sets where indicated
Watertight receptacles
1/4 turn ball valves where indicated
Matching (gas) (water) QD & connectors where
indicated.
(Mechanical)(Electric solenoid) gas valve(s) and
manual shut off (one)(each) end.
LOCO ISLAND UDS MODEL #IL__ PROJECT:_______________________________ ITEM #______
AVTEC INDUSTRIES INC. 120 KENDALL POINT DR. OSWEGO, IL 60543 FAX [630] 851-5777
AVTEC's policy of continuous product improvement includes the right to change specifications without notice.
Project item #______
Prepared for Date:
Backsplash Utility Distribution System Model BL * *
APPLICATION DATA
The Loco Backsplash UDS is a low cost electrical chase available
with a hot or cold water plumbing manifold, ready to be mounted
to 2" min. high backsplash (see detail on reverse). It provides a
sanitary and aesthetically pleasing method of distributing electric
and water both on top and below the counter. AVTEC electrical
and water connectors are available, or equipment may be direct
connected. The water connectors are highly flexible; specifically
for counter top use. System will accommodate up to 20A,
120/208/3/ electrical circuits and either hot or cold water.
DESIGN FEATURES
• U.L. Listed. Complies with all national codes
• Pre-engineered, S/S construction
• Flexibility for change
• Ease of cleaning and service
• Highly Flexible S/S Water Connectors
OPTIONS AND ACCESSORIES
• Matching Cord Sets
• Matching Water Connectors
• Matching Water Quick-Disconnect
**MODEL NUMBER GUIDE
Backsplash model BL is available with the following services.
Electric and water models are 9" high x 2" deep; electric only
are 6" high x 2" deep. Lengths are in 3, 6, 9, 12ft.
increments. Filler pieces are provided and cut to size in the
field. Lengths over 12 ft. and filler pieces must be field
attached.
Model BL * *
EO = Electric only
EH = Electric and hot water
EC = Electric and cold water
SPECIFICATIONS
Provide AVTEC U.L. Listed, backsplash mounted, LOCO
UDS System, Model No. __________, with (electric
chase)(3/8" (hot) (cold) water manifold). System shall be
(6")(9") high x 2" deep x __ ft. long O/A in (3') (6') (9') (12')
increments, and constructed of 300 Series stainless steel
with a # 4 finish. Provide NEMA receptacles on front, K.O's
on bottom, and capped nipples on front and bottom where
indicated.
Also provide:
Matching cord sets where indicated.
Watertight receptacles
Matching quick-disconnect
Matching hose connector
AVTEC INDUSTRIES INC. 120 KENDALL POINT DR. OSWEGO, IL 60543 [630] 851-4800
Loading...