RA2 Owner's Manual Rev. B - 0499
RA2 Owner's Manual Rev. B - 0499
Standard Features of Remote Access
5- Year War ranty — Avital Technologies guarantees the operation of the
þ
control unit and remote controls for five full years from the date of
purchase (see the enclosed warranty card for details).
Two Avi Glo 4- Button/9- Channel Re mote Con trols — Designed for
þ
easy fingertip control, these 4-button remotes allow you to operate your
car’s power door locks as well as optional accessories from up to 100 feet
away. Once exposed to light, the AviGlo remote control buttons will glow,
making the buttons visible in the dark.
User-Friendly Pro gram ming — With a few flicks of the valet switch, you
þ
can easily customize several features of your system to fit your lifestyle.
(See "User-Programmable Features" on page 8.)
Starter Dis able Ca pa bil ity — With the addition of an optional relay, your
þ
Remote Access2 will electronically disengage your vehicle’s starter motor
every time you remotely lock all the doors. If a thief gets into your car, he
won’t be able to start the engine even if he breaks open the steering
column and forces the ignition switch. In fact, he wouldn’t be able to start
the engine if he had a copy of your car keys. This “Starter Disable” feature
may also qualify you for a discount on your vehicle insurance.
User- Programmable Pas sive Starter Dis able — If the op tional starter
þ
dis able re lay was added, you can pro gram your sys tem to auto mati cally
dis able the starter 30 sec onds af ter the ig ni tion key is turned "OFF."
2
System
User- Programmable Pas sive Door Lock — You can program your Remote
þ
Access2 system to automatically lock all the doors if you forget to lock them
with your remote control. You must have the "Passive Starter Disable" feature
programmed ON to access the Passive Door Lock feature.
LED Sys tem Status In di ca tor — A flashing red light on the dashboard or
þ
console warns away thieves while visually confirming that the doors are
locked and the Starter Disable is engaged.
One- Step Re mote Con trol Code Learn ing — You can easily add up to
þ
four Avital remote controls to your system. (See "Programming Table for
Remote Controls" on page 9.)
1
RA2 Owner's Manual Rev. B - 0499
In stant Re mote Con trol Code De le tion — Removes the code of a lost or
þ
stolen remote so it can no longer control your system. (See "Programming
Table for Remote Controls" on page 9.)
Elec tronic Scan Pre ven tion (ESP) — Some thieves use digital code
þ
"scanners" that rapidly transmit one remote control code after another until
they hit the one code that activates the unlock function of a keyless entry
system. Electronic Scan Prevention recognizes scanners and blocks their
codes to prevent unlocking by anyone but you.
Re mote Panic with Safety Locks™ (op tional) — In a threatening
þ
situation, you can activate a siren/horn, flash the parking lights and unlock
the doors for immediate entry into your vehicle. (Requires the addition of
an optional siren or interfacing with the vehicle horn.)
Audi ble Lock/Un lock Con fir ma tion Capability — This programmable
þ
feature will chirp the siren or beep the horn two times when the LOCK
button is pressed and once when the UNLOCK button is pressed. (Requires
the addition of an optional siren or interface with the vehicle horn).
Vis ual Confirmations — The Remote Access
þ
parking lights to confirm door locking and unlocking.
In te rior Light Il lu mi na tion — Turns on the interior lights for 30 seconds
þ
when you remotely unlock or until the ignition key is turned "ON."
User-Pro gram ma ble Il lu mi nated Exit — The system can be programmed
þ
to turn on the interior lights for 30 seconds after the ignition key has been
turned "OFF."
2
will flash your vehicle’s
Re mo te -Con trolled Door Lock/Unlock — Allows you to lock and unlock
þ
your doors without using your key.
Two-Stage Un lock Ca pa bil ity — For personal safety, when you press the
þ
remote control UNLOCK button, only the driver’s door will unlock. Simply
press the remote button again to unlock the passenger doors (may require
an additional relay).
User- Programmable Ignition- Controlled Door Lock/Un lock —
þ
Automatically locks your vehicle’s doors when you turn the ignition "ON"
and unlocks them when you turn the ignition "OFF."
2
RA2 Owner's Manual Rev. B - 0499
Pro tected Valet Mode — If you have the Passive Lock and Passive Starter
þ
Disable features turned on, Valet Mode temporarily overrides these feature
so you can have your car washed, serviced or valet parked without giving
up your remote control. You can put the system in Valet Mode via a flick of
a hidden switch. Just repeat the action to return the system to its normal
operating mode.
Two Remote- Controlled Accessory Out puts — Allows you to add up to
þ
two remote-controlled optional accessories such as a remote engine starter,
remote headlight activation, window roll-up/down and many other
available accessories.
Re mote Trunk Re lease Ca pa bil ity — Allows you to activate your
þ
vehicle’s electronic trunk release from up to 100 feet away. (May require an
optional relay. For vehicles with a manual trunk release, a trunk unlock kit
is also required.)
3
RA2 Owner's Manual Rev. B - 0499
Op er at ing Your Remote Access2 System
Remote Controls
Included with your system are two AviGlo™ 4-button/9-channel remote
controls. Once exposed to light, the AviGlo remote control buttons will glow,
making the buttons visible in the dark.
Your remote control (remote) is a miniature transmitter powered by a small +12
volt battery. Obstructions, electrical or radio interference, weather conditions,
window tint or a weak battery can reduce this range. Your remote is the key to
your system and can be used to lock and unlock your doors, "pop" your trunk,
control a remote engine starter or other optional accessories
Your system can accept up to four Avital remote controls. Additional remote
controls and remote control batteries can be purchased from any authorized
Avital dealer, or by calling Avital Technologies toll-free at 1-800-253-0334
(within the U.S.) or 1-847-215-2233.
To Lock the Doors
Press the remote control LOCK button for 1-2 seconds. The doors will lock,
the parking lights will flash twice and the dash mounted LED will blink slowly.
If the optional panic feature was connected, the horn or siren will sound two
times. This feature can be programmed ON or OFF. (See "Programming Table
for System Features" on page 8.) If the optional starter disable relay was added,
the starter will be disabled.
To Un lock the Doors
Press the remote control UNLOCK button for 1-2 seconds. The doors will
unlock, the interior lights will turn on, the parking lights will flash once and
the dash mounted LED will turn off. If the optional panic feature was
connected, the horn or siren will sound one time. If the optional starter disable
was added, it will disengage allowing you to start the vehicle.
Two-Stage Un lock
If the optional two stage unlock feature was installed, press the UNLOCK
button for 1-2 seconds. The driver door only will unlock. Within 3 seconds,
press the UNLOCK button again and the passenger doors will unlock.
User-Pro gram ma ble Ig ni tion-Con trolled Door Lock/Un lock
For the ultimate in security and convenience, the Remote Access2 will
automatically lock the doors when the ignition key is turned "ON" or the
engine is started, and the doors will unlock when the ignition key is turned
"OFF." This feature can be programmed ON or OFF. (See "Programming Table
for System Features" on page 8.)
4
RA2 Owner's Manual Rev. B - 0499
User-Programmable Passive Starter Disable
If the optional starter disable relay was added, your system can be
programmed to automatically disable the starter 30 seconds after the ignition
key is turned "OFF." (See "Programming Table for System Features" on page 8.)
1. Turn the ignition key to the "OFF" position.
2. The LED will flash rapidly for 30 seconds.
3. The LED will then flash slowly to indicate the starter has been disabled.
User-Programmable Passive Door Lock
If the Passive Starter Disable and Passive Lock features are programmed "ON,"
the system will automatically disable the starter (optional) and lock the doors
30 seconds after the ignition key is turned "OFF." (See "Programming Table for
System Features" on page 8.)
1. Turn the ignition key to the "OFF" position and remove the key.
NOTE: Keep the key in your possession.
2.The LED will flash rapidly for 30 seconds.
3. The doors will lock and the LED will flash slowly to indicate the starter has
been disabled.
Remote Panic with Safety Locks™ (optional)
In a threatening situation, you can activate Remote Panic with Safety Locks .
When activated, the siren/horn will sound and the parking lights will flash. If
you are inside your vehicle and the ignition key is "ON," the doors will lock. If
you are outside the vehicle with the ignition key "OFF," the doors will unlock
allowing you to move to safety. (Requires the addition of a siren or interfacing
with your vehicle horn.)
Ac ti vate
1. Press the remote control LOCK button for 3-4 seconds.
2. The siren/horn will sound and the parking lights will flash on and off.
3. If the ignition key is "OFF," the doors will unlock. If the ignition key is
"ON," the doors will lock.
De ac ti vate
1.
Press the remote control LOCK button for 1-2 seconds.
2. The siren/horn will shut off and the parking lights will stop flashing.
Interior Light Illumination
When you unlock the doors with your remote control, the system will turn on the
vehicle’s interior light(s) for 30 seconds or until the ignition key is turned "ON."
5
RA2 Owner's Manual Rev. B - 0499
User Programmable Illuminated Exit
The system can be programmed to turn on the interior lights for 30 seconds
after the ignition key has been turned "OFF." Turning the ignition key "ON" or
remotely locking the doors will turn off the interior lights. (See "Programming
Table for System Features" on page 8.)
Remote-Controlled Trunk Release
Press the remote control TRUNK button for 1-2 seconds. The trunk will
unlatch (pop open).
Remote-Controlled Accessories
You can operate up to two remote-controlled accessories such as a remote
engine starter, window roll-up/down, headlight activation, fuel filler door
release or remote garage door opener.
To operate one of the accessories, press the remote control OPTION button
for 1-2 seconds to activate or deactivate the optional accessory.
By pressing the remote control LOCK and UNLOCK buttons simultaneously
for 1-2 seconds, you can operate an additional optional accessory.
Valet Switch
The valet switch is a small hidden toggle switch that allows you to control
many of the system's programmable features and prevents Passive Lock and/or
Passive Starter Disable. In the event of a lost or stolen remote control, you can
use this switch to bypass (shut off) the entire system and add or delete remote
controls. (See the "User-Programmable Features" on page 8).This switch can
only be controlled with the use of your ignition key.
NOTE: Be sure to have your dealer show you where the valet switch is located.
Protected Valet Mode
If the Passive Lock and/or Passive Starter Disable features are turned on, you
should use your valet switch to place your system in Protected Valet Mode
whenever your car is being serviced by mechanics, car wash personnel or
driven by a valet attendant. While in Protected Valet Mode, all system features
are bypassed to prevent unauthorized or accidental activation.
To Turn on Pro tected Valet Mode
1. Turn your ignition key to the "ON" position or start the engine.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in Protected Valet
Mode.
4. Turn the ignition key to the "OFF" position.
6
RA2 Owner's Manual Rev. B - 0499
To Turn OFF Pro tected Valet Mode
1. Turn your ignition key to the "ON" position or start the engine.
2. Flick the valet switch to the "OFF" position.
3. The LED will turn off to indicate the system is no longer in Protected Valet
Mode.
4. Turn the ignition key to the "OFF" position.
LED Status
Off System is disarmed
On solid In Protected Valet Mode
Slow flash System is armed
Rapid flash Passive arming
7
RA2 Owner's Manual Rev. B - 0499
User-Programmable Features
All system and remote control programmable features are accomplished by
turning the ignition key "ON" (or starting the engine) and flicking the valet
switch on and off a preset number of times.
The system also allows you to add new remote controls in one step, delete lost
or stolen remote controls or rearrange the factory preset remote control
functions.
1. Remove the system from Protected Valet Mode. Programming cannot be
accessed while the system is in Protected Valet Mode indicated by the LED
on solid red.
2. Select the feature you wish to program from the "Programming Table for
System Features" below or the "Programming Table for Remote Controls"
on page 9. Note the number of beeps associated with that feature.
3. Turn the ignition key to the "ON" position.
4. Within 10 seconds, begin flicking the valet switch on and off. The siren
will beep once each time you flick the switch on then off.
5. Continue flicking the switch on and off, counting the number of beeps.
NOTE: Stop when you reach the number of beeps as so ci ated with your
cho sen fea ture.
6. Follow the "Secondary Action." You will hear a number of beeps to
confirm that you have changed the setting of that feature.
7. Turn the ignition key to the "OFF" position.
8. Repeat steps 1-7 for any other feature you wish to program.
Pro gram ming Ta ble for Sys tem Fea tures
Fea ture
Ignition Controlled
Door Lock/Unlock
Illuminated Exit ON 8
Passive Starter Disable OFF 9
Passive Door Lock OFF 10
Audible Lock/Unlock
Confirmation
Fac tory
Set ting
ON 4
OFF 13
RA2 Owner's Manual Rev. B - 0499
# of
Beeps
8
Sec on dary Action
Wait 3 seconds. The system will beep once
for OFF, twice for ON.
Wait 3 seconds. The system will beep once
for OFF, twice for ON.
Wait 3 seconds. The system will beep once
for OFF, twice for ON.
Wait 3 seconds. The system will beep once
for OFF, twice for ON.
Wait 3 seconds. The system will beep once
for OFF, twice for ON.
Pro gram ming Ta ble for Re mote Con trols
Feature
Door Lock
Door Unlock
Trunk Release Output
Accessory Output
Accessory Output
One-Step Code
Learning
Instant Code Deletion
Fac tory
Set ting
LOCK
Button
UNLOCK
Button
TRUNK
Button
OPTION
Button
LOCK
and
UNLOCK
# of
Beeps
14
15
16
17
18
19
20
Sec on dary Action
Press the LOCK button. The system will
beep once for learned confirmation.
Press the UNLOCK button. The system will
beep twice for learned confirmation.
Press the TRUNK button. The system will
beep 3 times for learned confirmation.
Press the OPTION button. The system will
beep 4 times for learned confirmation.
Press the LOCK and UNLOCK buttons. The
system will beep 5 times for learned
confirmation.
Press the LOCK button. The system will
beep once. The remote will operate at
factory preset order.
Wait 3 seconds. The system will beep twice.
All remote controls are erased from memory.
9
RA2 Owner's Manual Rev. B - 0499
© 1999 Avital Technologies, Inc. Part Number: 32-5003 Rev. B
RA2 Owner's Manual Rev. B - 0499
Loading...