Avision IS15 User Manual
Sheet-fed type
Photo Scanner
User Manual
Regulatory model: FS-0913B
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows and MS-DOS are trademarks of Microsoft Corporation.
IBM, IBM PC are registered trademarks of International Business Machines Corp.
ENERGY STAR
®
is a U.S. registered mark.
Other brands and product names herein are trademarks or registered trademarks of their
respective holders.
Copyright
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of Avision Inc.
Material scanned by this product may be protected by governmental laws and other
regulations, such as copyright laws, the customer is solely responsible for complying with
all such laws and regulations.
Warranty
The information contained in this document is subject to change without notice.
Avision makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
ii
FCC Radio Frequency Interference Statement
This product has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. The FCC Class B limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult your point of purchase or service representative for additional suggestions.
CE Warning
This product satisfies the Class B limits of EN55022, EN55024 and safety requirements of
EN 60950.
Disposal of Waste Equipment by Users in Private Union
This symbol on the product or on its packaging indicates that the product can not be
disposed of with your other household waste. Instead it should be sent to appropriate
facilities for recovery and recycling in an effort to protect human health and the
environment. Fore more information about where you can drop off your waste equipment
for recycling, please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
iii
System Requirements
¾ IBM compatible PC 586, Pentium or higher
¾ Microsoft Windows 2000, Windows XP, Windows Vista/Windows 7
¾ At least 100 MB of free hard disk space (500 MB is recommended)
¾ At least 128 MB of system memory (512 MB of RAM is recommended)
At least 1 GB of RAM for Windows Vista/7
¾ USB port 2.0 (compatible with USB 1.0)
iv
Table of Contents
1. Introduction.........................................................................................................1-1
2. Scanner Overview.............................................................................................2-1
2.1 Scanner View ...................................................................................2-1
3. Installation & Operation..................................................................................3-1
3.1 Initial setup......................................................................................3-2
3.2 Scan an original................................................................................3-3
3.3 Using Plastic sheaths .........................................................................3-4
3.4 Scan dark or night pictures.................................................................3-5
3.5 Power off the scanner........................................................................3-6
4. Connecting to a Computer..............................................................................4-1
4.1 How to connect to a computer ............................................................4-1
4.2 Disconnecting the scanner from a computer..........................................4-3
5. Scanning To PC Manager.................................................................................5-1
5.1 Starting the Scan To PC Manager ........................................................5-1
5.2 Uninstalling the Scan To PC Manager ...................................................5-2
6. Maintenance.........................................................................................................6-1
6.1 Cleaning the roller.............................................................................6-1
6.2 Calibrating the scanner......................................................................6-2
6.3 Cleaning the image sensor .................................................................6-3
7. Troubleshooting..................................................................................................7-1
7.1 Frequently asked questions ................................................................7-1
7.2 The indicator light pattern ..................................................................7-2
8. Specifications ......................................................................................................8-1
v
1. Introduction
Congratulations on your purchase of the scanner. Now you can scan and
store your printed photos directly to your memory card or flash disk without
connecting to any computer.
Simply insert a memory card or flash disk into the scanner, and power it on.
When the scanner is ready, feed your printed photo into the scanner and
your images will be stored in the memory card or flash disk. If you want to
store your photos directly into your computer, just plug in a USB cable
and/or use the supplied Scan To PC utility.
Before you install and operate the product, please take a few minutes to read
through this manual. It provides proper instructions for you to install,
operate and maintain the product.
The following figure indicates the package contents. Please check all the
items against your checklist. If you do not receive all the items, please
contact your authorized local dealer immediately.
1-1
1
5
2
3
6
4
7
1. Scanner
2. Sensor Cleaning Swab
3. Roller Cleaning Tool
4. Calibration Chart
5. Power Adapter
6. USB Cable
7. Black Plastic Sheath/White Plastic Sheath
Note:
1. Only use the AC adapter DSA-12PFA-05 FUS 050200 (DEE VAN) included
in the machine. Using other AC adapters may damage the machine and
void the warranty.
2. Please unpack the packing carefully, and check the contents against the
checklist. If any items are missing or damaged, please contact your
dealer immediately.
1-2
2. Scanner Overview
1
2.1 Scanner View
No. Name Function/ Description
1
2
1 Indicator light
2 Feeding Slot Insert an original to begin scanning.
Indicates the operating status of the
scanner.
2-1
6
5
3
4
7
No. Name Function/ Description
To power on the scanner, connect the
supplied power adapter to the scanner.
3 Power connector
To power off the scanner, disconnect the
supplied power adapter from the
scanner.
4
Mini USB
connector
For connecting to a computer via a USB
cable.
5 Flash disk slot For inserting a flash disk.
6 Memory card slot For inserting a memory card.
Press to start cleaning the scanner’s
roller (Refer to the Cleaning the roller
section on page 6-1).
Press to eject paper during paper jam
condition. (Refer to the 2-blink
description of The indicator light
pattern section on page 7-2).
7
Function Button
Press until the indicator light starts
blinking to calibrate the scanner.
to the Calibrating the scanner section
on page 6-2).
(Refer
2-2
Loading...