Aviosys IP Power 9258AU, IP Power 9258DK, IP Power 9258GE, IP Power 9258FR, IP Power 9258SW User Manual

Ref#92550806002

IP Power 9258xx

User Manual

Release Date: 11/09/2012

Manual Version: 1.0

Firmware: Ver. 4.00

- 1-

Ref#92550806002

Warning: Any changes made to this equipment without permission may cause
damages to the device!

IMPORTANT NOTICE

1. IP Power 9258xx is designed to be used with a protective covering, the user is
responsible for any damages caused from misuse, use under inappropriate
conditions or from wrong power adaptor.

2. Please use the power adapter provided by the dealer, the manufacturer is not
responsible for any damage caused from using power adapters not.

3. Do not shake the IP Power 9258xx in any fashion

4. Please contact the dealer If IP Power 9258xx is not working properly.

5. Do not direct exposure to the sun to use indoor ventilated environment
Copyright © 2012 All rights reserved. No part of this publication may be

reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent of us.
All trademarks and products mentioned in this document are the properties of us.

- 2-

Ref#92550806002

Table of Contents

1.) WELCOME .........................................................................................................................5

INTRODUCTION ..........................................................................................................................5

MINIMUM SYSTEM REQUIREMENTS ...............................................................................................5

2.) PRODUCT OVERVIEW ........................................................................................................6

FEATURES .................................................................................................................................6

SPECIFICATION ..........................................................................................................................6

PACKAGE CONTENTS ...................................................................................................................7

3.) INTERFACE DESCRIPTION ...................................................................................................9

HARDWARE INTERFACE ................................................................................................................9

4.) SETTING UP YOUR DEVICE ............................................................................................... 10

BEFORE WE START .................................................................................................................... 10

SETUP FOR INTERNET ACCESS ...................................................................................................... 10

9258XX QUICK INSTALLATION ..................................................................................................... 11

USING IP EDIT ......................................................................................................................... 12

USING IP SERVICE .................................................................................................................... 14

5.) WEB INTERFACE .............................................................................................................. 16

POWER CONTROLS ................................................................................................................... 17

POWER CONTROL ............................................................................................................................... 17

CURRENT VALUE, CURRENT LIMIT SETTING & TEMPERATURE VALUE ............................................................ 18

SCHEDULER ............................................................................................................................. 20

PING SETTINGS ........................................................................................................................ 21

SETUP ................................................................................................................................... 23

SYSTEM ............................................................................................................................................ 24

DDNS .............................................................................................................................................. 26

E-MAIL ............................................................................................................................................. 27

CHANGE PASSWORD ........................................................................................................................... 28

WAKE ON LAN ................................................................................................................................... 28

IP SERVER CONFIGURATION ................................................................................................................. 29

TIME ................................................................................................................................................ 29

LOGOUT ................................................................................................................................. 30

6.) CONTROLLING THE DEVICE .............................................................................................. 30

- 3-

Ref#92550806002

CGI HTTP COMMANDS ............................................................................................................. 30

A.) SET POWER COMMAND ................................................................................................................. 31

B.) READ POWER COMMAND ............................................................................................................... 31

C.) POWER DELAY .............................................................................................................................. 31

D.) READ SCHEDULE ........................................................................................................................... 32

E.) SETUP SCHEDULE .......................................................................................................................... 32

F.) READ CURRENT VALUE ................................................................................................................... 33

TELNET COMMANDS ................................................................................................................. 33

7.) FREQUENTLY ASKED QUESTIONS (F.A.Q) .......................................................................... 35

- 4-

Ref#92550806002

1.) Welcome

Introduction

The 9258xx is an industrial grade 4 ports output remote power management
through an Ethernet connection. This device can easily cooperate integrate with
other devices and allow power control with your integrated system. And also
control each output through each button locally.

It can Detect consume current and control their pocket and with higher safety
designs like Dual Cut Relay , Power leakage protection and zero cross
circuit which make 9258xx the most safety & friendly IP Power solution.

With the 9258xx robust design and high quality components it provides an added
incentive to other devices or can be used independently. The 9258xx brings an
economical solution to a professional industry power , human resource and time.

Minimum System Requirements

Operating Systems:

∙ Windows Operating Systems
∙ Web Broswer : IE, Firefox , Google Chrome
∙ 10/100m Ethernet switch/hub
∙ Ethernet network port/card
∙ Internet (For remote access) or Ethernet Network (Internal Network use) with

some type of Internet connection, (i.e. ADSL, Cable, Dial up or any other
forms of Internet service)

- 5-

Ref#92550806002

2.) Product Overview

Features

1. Embedded web server - No PC is required for it to work

2. 4 ports Industrial Dual Cut Relay design network controller.

3. Accessible with web browsers - IE , Google Chrome & Firefox.
and also with the browser of smart phone - like iPhone and Android system.

4. Network protocols supported: Http, DDNS, DHCP, Virtual and Dynamic IP.

5. Detect " total Current " and " internal Temperature "

6. Power leakage protection- turn off as leakage over 3mA

7. Over current Protection : Auto Turn off all outlets as total current over 10Amp

8. Auto Ping - Watch Dog - Ping assigned IP to turn on/off each outlet.

9. Time Schedule -- pre-set your planned time to switch on/off

10. CNT technology -- Just Plug & Play no need to port forward

11. Designed for light control : Like for T5 light Tube - energy savings & increasing
brightness

12. Inrush Current protection HI - Grade relay select for extra protection

13. Supports " Zero Cross " to protect relay contacts and to suppress noise generated
when the load current rises suddenly .

14. Power surge protection design to protect against high voltage power surge.

15.Designed to meet high voltage and current safety standard design and regulation.

16. Wide range of electric Power Module can be used in both 110V &
220V environment

17. SDK provided for own software development.

18. 7 different countries power socket type for choosing :
Australia, Danish, France Germany, Swiss. UK , USA

Specification

Power Input:

Specification: 10AMP 18AWG 0.75 x 3C (Standard PC Power Cable)

Power Output :

Maximum current of Each Output: 8A
Maximum current of Total Output: 10A

Weight: 990g ( without packaging) .
Dimensions: 220 x 130 x 55 mm (L x W x H)

Relay Specification:

Regular Use: Max. 8A / port
T5 fluorescent light control: 240Watt

- 6-

Ref#92550806002

Package Contents

1.) 9258xx Unit x 1

2.) Installation CD

CD contain manual, software, and documentation

3.) Power Cable (Optional)

Standard PC power cable.

Specification: 10AMP 18AWG 0.75 x 3C

4.) Spare Fuse

Spare Fuse in the socket.

Fuse type：U/C GFE 10A 250V (PF)

* 7 Models with different plugs :

* 9258AU

* 9258FR

- 7-

Ref#92550806002

* 9258GE

* 9258UK

* 9258USA

* 9258DK & 9258SW

- 8-

Ref#92550806002

3.) Interface Description

Power Output

Simply plug & play in the device that you would like to
power control. (Comes in different plug standards)

4 Buttons Control

* ON/OFF Control : User can control each output
ON/OFF by keep pressing each button for few seconds.
The button light is RED as turn off or Blue as turn ON .

Reset

To revert to manufacturer default, please turn off the
power input switch then keep hold button #1 & #2 .
Switch on the power and wait for a long beep sound then
release the button #1 & #2 . After the long beep sound
you should log in as default value.

Ethernet port :

Plug in the RJ45 Ethernet cable to the Ethernet port

Power Input:

The Power Input locates on the back of the device.
Include On/ Off Switch , plug input and fuse socket :
* Plug : For power in. Support 100VAC ~240VAC
* Fuse Socket : To prevent damaging from over
loading . 9258xx comes with fuse and there is one spare
fuse in the socket. Fuse type: U/C GFE 10A 250V (PF)

Hardware Interface

- 9-

Ref#92550806002

Fix Ears ( Option )

User can fix 9258xx on with screws and ear.Notice: The
fixed screws SPEC is type M3 and the length of the
screw do not over 5mm.

4.) Setting up your Device

Before we Start

*Before setting up the device make sure of the following:

1.) All the package contents are all included if anything is missing please
contact the dealer where the device was purchased from.

2.) Check that the power input cable is working correctly.

3.) Check the cables to make sure there are no problems with the cable.

Setup for Internet Access

To access the 9258xx from the internet, the router will require port forwarding to
be activated for your IP Power device.

* Please refer to your routers manual on how to port forward the device.

For example
9258xx IP Address: 192.168.100.200

Port: 8080

* On the router you will need to port forward both TCP / UDP to the IP Address

192.168.100.200 on Port 8080.

- 10-

Ref#92550806002

9258xx Quick Installation

1.) Connect the Ethernet cable (RJ45) to the 9258xx to your local area network.

2.) Then connect the power cable into the power cable input of the 9258xx.

3.) Connect the device that you would like to control to the output plug on the top

of the 9258xx.

4.) Open the IP Edit device search tool from the CD.

5.) The device will automatically be set to DHCP and will show on IP Edit. (Refer

to Using IP Edit for more details)

a. If no DHCP is detected the default IP and Login for the device will be

the following

Default IP: 192.168.1.100 (When no DHCP is apparent)
Default Login: admin
Default Password: 12345678

6.) Then on IP Edit double click on your device and a Internet Explorer window

will appear with the login screen.

7.) Simply login with the default login and password.

Default Login: admin
Default Password: 12345678

- 11-