How it Works
Aviosys
Loading...
IP Power 9258+Ping
User Manual
32 pgs1.38 Mb0

Aviosys IP Power 9258S, IP Power 9258T, IP Power 9258T+Ping, IP Power 9258+Ping User Manual

IP POWER 9258 USER MANUAL
IP Power 9258S / 9258T
9258S+Ping / 9258T + Ping
USER MANUAL
IP POWER 9258 USER MANUAL
VER. 5.01
- 1 -
Warning:
Any changes to this equipment without permission may cause damages to your equipment! This equipment has been proved by CE & FCC to can be prevented from the influence of harmful electronic jamming in normal business use condition.
IMPORTANT NOTICE
1. We have no responsibility for the possible damage caused by improper usage or abnormal working environment.
2. Do not use IP POWER in strong shaking condition.
3. Please contact the dealer If IP POWER works improperly.
Copyright © 2015 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of us
All other products mentioned in this document are trademarks of their respective
manufactures.
We are exempt from notify any change of our products.
IP POWER 9258 USER MANUAL
- 2 -
Table of Content
1. INTRODUCTION ...................................................................................................................................... 3
FEATURE ........................................................................................................................................................ 3
SPECIFICATION ............................................................................................................................................... 3
2. SPECIFICATION .................................................................................................................................. 4
PACKAGE CONTENTS .................................................................................................................................... 4
MINIMUM SYSTEM REQUIREMENTS........................................................................................................... 4
3. INTERFACE DESCRIPTION ................................................................................................................. 5
4. HARDWARE & SOFTWARE INSTALLATION .......................................................................... 6
HARDWARE INSTALLATION ........................................................................................................................... 6
SOFTWARE INSTALLATION .......................................................................................................................... 7
5. INITIAL SETTINGS .................................................................................................................................. 7
INITIAL SETTING THROUGH THE ETHERNET .............................................................................................. 7
6. HARDWARE CONTROL & SETTINGS............................................................................................ 10
7. CONTROL & SETTINGS ...................................................................................................................... 11
DEVICE NAME & TIME ............................................................................................................................. 12
POWER ......................................................................................................................................................... 13
SYSTEM SETTING ......................................................................................................................................... 17
SETTING OF SOFTWARE SHUT DOWN CONTROLLED PC/ SERVER ......................................................... 23
8. SNMP – MIB TREE ................................................................................................................................. 25
9. HTTP COMMAND & TELNET ........................................................................................................... 26
CGI / HTTP COMMANDS............................................................................................................................ 26
a.) Set Power Command ......................................................................................................................... 26
b.) Read Power Command ..................................................................................................................... 26
c.) Power Delay ...................................................................................................................................... 27
d.) Read Schedule ................................................................................................................................... 27
e.) Setup Schedule .................................................................................................................................. 28
f.) Read current value ............................................................................................................................ 28
TELNET ...................................................................................................................................................... 29
10. FAQ ........................................................................................................................................................... 31
11. FAQ ……………………………………………………………….…………………….28
12. Webpage Customization ….………………………………….…………………….28
IP POWER 9258 USER MANUAL
VER. 5.01
- 3 -
1. Introduction
IP POWER 9258 is a web controller which can be easily used in the industry field. With the remote network control technology, user can control or query the power supply of equipment. User can do this in any computer connected to the internet or local area network, there is no special program needed, also there is no need to open the external case of the computer. Try to imagine that while traveling in a foreign country, you can control the power supply of your electric equipments, such as a computer, a server, a router, an entrance guard or security / surveillance system directly or use a time schedule comes with the IP POWER 9258. You can remotely control the power switch with any computer connected to the network, which is not only convenient, but it also big saving on the manpower and time.
Feature
1. Built in web server, can be used through the Ethernet or Internet network.
2. Support multiple browser, such as Internet Explore.
3. Control 4 sets AC outlet equipment at the same time.
* 9258T / T+Ping - Outlet NEMA5-15P * 9258S / S+Ping - Outlet IEC320 - C13.
4. Supported HTTP , TCP/IP , DHPC , DDNS , SMTP, SNMP & TELNET .
5. Security passwords identify. Easily installed and can be updated online.
6. Supported RS232 port communication, indicate all kinds of real time state of 9258.
7. Safely designed for high voltage resistance and protection for leakage of electrical currency,
using nonflammable material
8. Network Server reboot -- can remote control to reboot the power on for the PC or Server at
remote site ,
9. Timer Schedule -- can pre-set the time schedule to turn power on / off thru Internet /
Ethernet.
10. Support NTP (Network Time Protocol) - synchronize the time of 9258 to the Internet web
address time.
11. Arrange own webpage design : Change the user-defined graphics and hyperlinks to
customize the web pages by webpage SDK
12. Provide SDK for own Software develop and application.
13. Safety shut down controlled PC/ Server ( WINDOWS OS )
14. Auto Ping function : Control On/ Off by Ping setting
( S + Ping & T + Ping model only )
Specification
* Maximum rated voltage for each 4 outlet: 250V AC, 24V DC * Maximum rated currency for each 4 outlet: (Total) 15A AC/DC, * Maximum rated currency: (Individual outlet) 6A AC/DC * Action delay: Max 10ms * Working temperature: 0~ 50°C
IP POWER 9258 USER MANUAL
- 4 -
2. Specification
Package contents
* 9258S /S+Ping - For EU / AU / UK
* 9258T / T+Ping - For USA / TW / JP
Option; RJ45 (Cat5) net wire
Option : Power Cable
Minimum System Requirements
◼ Web Browser like Google Chrome , Firefox & IE
◼ Network card with RJ45 port & Ethernet HUB or Switcher ◼ Internet network (Ethernet, ADSL or other ways, depends on whether you need far end
control ability or not)
NOTICES:
1. IP Power 9258S: for 220-250V, please use power (IN) wire at 10A current. Max output current: (total) 10A. Max (individual) 6A.
2. IP Power 9258T: for 100-120V, please use power (IN) wire at 15A current.
Max output current: (total) 15A. Max (individual) 6A.
IP POWER 9258 USER MANUAL
VER. 5.01
- 5 -
3. Interface Description
IP Power 9258 Front interface shown below:
From left to the right
1. RESET: self-protect AC reset button. IP Power 9258 can cut off the power supply of outlets
automatically if there is a shortcut or current overload. After user having solved the problem, push the reset button, the AC power supply will become normal.
2. LED: 4 LED indicator lights. If the LED is on, means the corresponding outlet is power on.
3. RS232 port: provide the power output state and get IP address to re-update if update fails
4. Circle sign and On & Off: Hardware power ON /OFF setup. Please do o refer page
11 for proper operation.
5. RJ45 Ethernet port: link to the net wire.
Rear interface shown below: 9258S:
9258T:
Port description (from left to the right)
1. 90-240VAC power input port
2. Power switch: the power switch ON /OFF of IP Power 9258.
3. OUT 1- 4: 4 individually switched AC outlets
IP POWER 9258 USER MANUAL
- 6 -
4. Hardware & Software installation
Before you star to use IP Power 9258, please follow the steps below
◼ Check the package to make sure the contents is complete. ◼ Prepare one Ethernet HUB or Router ◼ Check the voltage of the power supply to make sure it is AC 110-240 volt ◼ Please confirm the specification of your power cable.
⚫ IP Power 9258S: for 220-250V, please use the 10A power cable. ⚫ IP Power 9258T: for 100-120V, please use the 15A power cable.
Hardware installation
a) Connect the 9258 to HUB through network wire. b) Connect the HUB or Router to the internet (either through DSL or Cable modem). c) Connect the power adapter to the 9258. d) Connect the power adapters of under control electric equipment to corresponding
out port of 9258.
＊ For 220-250V, please use power wire can support 10A current.
Max. Output current: (total) 10A, (individual) 6A.
Max. Output current: (total) 15A, (individual) 6A
IP POWER 9258 USER MANUAL
VER. 5.01
- 7 -
Software installation
Please follow the steps below to install the software.
1.Insert the Installation CD in the package and windows will auto-run. If not please browse for
the Autorun.html file in CD.
2. Click 9258S & 9258T in the IP POWER section of the installation CD
3.In stall IP Family to your desktop or any other place of your choosing
4. After you have saved it onto your desktop it is ready to be used.
5. Initial Settings
Initial setting through the Ethernet
Open “IPEdit.exe”. Make sure that the IP Power 9258 is properly turned on and there is an ethernet connection connected by a RJ45 cable.
In the local devices section of IPEdit all products under the same subnet network will appear. Please refer to below:
.
IP POWER 9258 USER MANUAL
- 8 -
IPEDIT will search and display all IP Products 9XXX series under the same local Ethernet. The default name for the IP Power 9258 is “IP9258”
1. Double click and highlight your IP Power 9258 device. The default device name and
IP/Network settings will all be displayed on the right hand side of IPEdit.
Make sure that the IP Address of your 9258 is setup on the same subnet network as your PC’s (Subnet mask, Gateway)
* Represents that your 9258 does not match the gateway of your router.
(E.g. If the Default Gateway of your computer is 192.168.1.1 The IP Address of your 9258 will need to be set up to 192.168.1.XXX.)
2a. Automatically Detect Network settings (Please go to 2b. for steps on how to manually enter network settings)
a.) Click on the REF button to the right of IPEdit b.) Please wait a few seconds while IPEdit detects your network settings. Then click the Apply
button to apply the new network settings
2b. Manually enter network settings In Ipedit: a.) You can manually enter the networks settings for the following:
The name: (please use numbers or letter) Gateway IP: (The default gateways IP can be found using IP Address: (please set in the same subnet as your PC) in the text windows.
b.) Then click Submit after the settings have been selected. Wait about 20 seconds for the new settings to be updated.
c.) Click Rescan, and the new device settings will display in text window.
Note:
1.) Make sure the RJ45 network cable is connected and the 9258 is powered on.
IP POWER 9258 USER MANUAL
VER. 5.01
- 9 -
2.) * The default IP address of the 9258 is 192.168.1.100. If you cannot get into the webpage of
the 9258, please make sure to set subnet of the IP Power 9258 to match with your PC Subnet Mask.
To obtain the IP information manually:
In Windows Go to:
a.) Start --> Run --> type in “cmd” --> Hit enter and the MS –DOS window will open, b.) Now type in “ipconfig”
The last set of numbers of the IP address can be any number between 1~254, but cannot be same as your PC, hub, router or any device in the network. Please use “IPDdit.exe “ to get the IP of IP Power .
* Same SUBNET: The first 3 sections of IP address is same - XXX.XXX.XXX.abc. The part of XXX must be the same. (E.g. If IP address is 192.168.1.100 , then another IP address 192.168.1.123 then these IP Addresses are in same subnet.) 5 .The default username and password of IP Power 9258 are:
Username: admin Password: 12345678
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use