Warning: Any changes made to this equipment without permission may cause
damages to the device!
IMPORTANT NOTICE
1. IP Kamera 9070 was designed for indoor use, it is the responsibility of the user for any possible
damages caused by outdoor use, especially in the rain.
2. Please use the power adapter provided by the dealer, the manufacturer responsibility for the
possible damage from using power adapters not .
3. Do not shake the IP Kamera 9070 in any fashion
4. Please contact the dealer If IP Kamera 9070 is not working properly.
The IP Kamera 9070 provides reliable, high quality solution to IP Kameras. Its distinctive 720P HD quality
picture, Tri-mode video capability, RTSP broadcasting capability, wide angle lens, built in 2GB microSD
memory, and much more functions makes this small device very powerful and unique. Also with innovative
features like My Web and EZ blog technology the 9070 can take your IP Kamera and make it a wonderful
promotional tool, blogging camera.
Using innovative IP technology, the built in web server of the IP Kamera 9070 will allow you to view your IP
Kamera from any remote locations around the world while bringing you world class surveillance and ease of
mind. Furthermore, with CNT technology the 9070 is easy to setup & use, simply just plug and play.
- 6-
Ref#90020326K0709
Minimum System Requirements
CPU Minimum Requirements
Intel(R), Pentium(R), DUAL Core (D),CPU 3.0GHz or equivalent
Operating Systems: WINDOWS Operating Systems (IE5.0+SPI)
512 MB system memory or above
Video Card: 3D hardware accelerator card required – 100% DirectX 9.0c compatible
10/100 Ethernet switch/hub
Sound Card: DirectX 9.0c compatible sound card
Ethernet network port/card
Network cable
Internet (For remote access) or Ethernet Network (Internal Network use) with some type of Internet
connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)
Software
VLC media player 0.8.6b or above.
Windows XP Service Pack 2 or above.
Resolution of screen setting: 1280x960 or higher for the display of 720P
2.) Product Overview
Features
1. Tri-Mode Camera (MPG4-1/MPEG4-2/M-Jpeg )
2. Advance Motion detection trigger AVI /Jpeg save on FTP / SD card or Email
3. 3 layers (Admin, Operator, and User) Password protected
4. Resolution from CIF 352x192 up to HD 1280x720P
5. Supports NTP protocol to get correct time schedule.
6. 1/2.5‖ Advance CMOS sensor, with highly sensibility for quick response insufficient lighting.
7. Supports HTTP CGI command set. Easy for system integration
8. IP Service Search utility, to find your IP Kamera on internet with ease
9. Watchdog / Event log design
10. TV Output capabilities
11. Built in LED Spotlight
12. Automatic alarm recording buffer
13. CNT Technology – Just Plug and Play no need to port forward
18. Supports: HTTP Web Server (HTTP), SSL, FTP client, SMTP client, NTP client, DHCP client,
UPnP client, RTSP over UDP, RTP
Specification
Casing: Lightweight plastic
Case Color: Black
Weight: 105 Grams (0.231 Lbs)
Dimensions (W x L x H): 108 X 58 X 28mm
Operating Conditions: 5 – 50 °C (41 – 122 °F)
Humidity 20 – 80% RH
(non-condensing)
Power: AC Adaptor
Input: 100-240V~0.3A MAX 10-20VA, 50-60Hz
Output: +5V 1.0A Max 5W
- 7-
Ref#90020326K0709
Package Contents
1.) 9070 Unit x 1
2.) 9070 Installation CD
3.) AC Adaptor
(One AC adaptor will be included and will correspond
to the countries power standards)
Specs:
Input: 100-250Vac /47-63Hz, 1A
Output: 5Vdc/1A
4.) Camera Mounting Bracket
5.) RJ45 Cable x 1 (Optional)
- 8-
Ref#90020326K0709
3.) Interface Description
Rear View
Device Reset:
Reset to Manufacturer Default:
Hold Reset button for 5-10 Seconds and the device
will reset to manufacturer default
Video Out:
The Video out requires a RCA connector to output
video to a different source.
RJ45 Ethernet:
Plug in the RJ45 Ethernet cable to the Ethernet port
DC 5 V Power Input:
Plug in the Power Adapter to the DC 5V
Rear Panel View
- 9-
Ref#90020326K0709
4.) Hardware Setup
*Before setup the device make sure of the following:
1.) Make sure that all the package contents are all included
if anything is missing please contact the store or your distributor.
2.) Make sure the power adaptor is the correct specification.
3.) Make sure that all the cables are working correctly
Internet Accessible Setup
The internet connection can be setup in two main ways so that the 9070 can be accessed
through the internet
Router / Firewall Setup
Using a Router/Firewall to connect each device to the internet
Note: The device needs to be port forwarded on the router so that it can be accessed by the
internet.
For example
9070-Basic IP Address: 192.168.1.882
9070-Basic Port: 9070
On the router that is being used port forwarded (port triggered) IP Address 192.168.1.882 and
port 9070. For this section you may be required to refer the user manual for the router due to the
fact that each router has a different way of setting up the device.
Note: Please refer to page: 43 on how to use CNT (Cross Network Technology). With CNT no
port forwarding is required to view the camera. But for normal functionality please use the web
browser to view the camera.
- 10-
Ref#90020326K0709
Static IP Setup
Static IP Address provided by the ISP.
In this case, the 9070-Basic is being connected to the internet through a hub, which is different
from a router. The hub does not provide DHCP, and therefore would require that this setup have
a static IP Address that is provided by the ISP.
Contact the ISP to find out the static IP address so that your device can be accessed through the
internet. Once a Static IP has been assigned the device will be able to automatically go onto the
internet.
Connecting the Device
1.) Connect the IP Kamera 9070 to a HUB or Router with a RJ45 network cable.
2.) Connect the HUB or Router to the internet (May through ADSL/XDSL modem).
3.) Connect the power adapter to the DC 5V port of IP Kamera 9070.
- 11-
Ref#90020326K0709
5.) Software Setup
The software for the device is located on the Media Link-IP Family CD that came with the device.
IP Kamera Pack is located on the main page of the CD. Please follow the directions carefully and
install the necessary files
Software for IP Kamera 9070
Software
1.) First place the Media Link-IP Family CD that came with your device into your CD/DVD Rom drive.
The CD should auto run but if it does not go to the CD/DVD Rom drive and select the file
―autorun.html‖.
2.) Select the IP Kamera section and pick the IP Kamera and Model that you are using.
- 12-
Ref#90020326K0709
3.) Download the following software and save them to the appropriate locations.
a. IP Edit - Device search tool which allows you to modify IP settings, find your on the local
network and IP Service.
b. Surf 16 CH – 16 Channel DVR, Monitoring, & Recording Software. Views up to 16
channels on one screen.
c. Surf Pop – Surf Pop is a new interactive IP Kamera monitoring software
4.) Once installation is complete please double click the IP Edit to configure and search for your
device.
Installing VLC Codec
The files that are recorded by the 9070 IRW requires this codec so that you are able to view the view.
Download the latest version of the VLC codec and install it into your computer. You can find the latest
version of the codec from here
Hhttp://www.videolan.org/
- 13-
Ref#90020326K0709
IP Edit
IP Edit is a search tool designed to setup and access the IP Kamera 9070 IRW.
IP Service is an additional feature which searches for the device easily without having to remember long
complicated IP addresses. Instead, this technology allows the user find his or her device through the internet
just by device name.
Note: Please allow the IP Kamera 9070 IRW 1 to load before using IP Edit .
Default IP: 192.168.1.168 (When 9070 IRW is connected to PC directly)
Default Login: Admin
Default Password: 12345678
1.) Double click on the IP Edit icon to run the program.
2.) Open IP Edit and any device in the same network should automatically be detected and listed in
the local devices sections.
Note: If the device is not showing up, please hit the rescan button and wait about 1 minute
Setup the Device:
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
- 14-
Ref#90020326K0709
Quick Easy Setup (Recommend for Beginner Users)
1.) Click on the REF button, and wait a few seconds. IP Edit will automatically
detect the network settings and setup the device.
2.) Once settings have been detected hit the apply button to apply the new settings.
3.) Hit yes to confirm and Enter the login and password for the Device to Approve changes
4.) Then hit the rescan button on IP Edit to confirm the changes have been made.
- 15-
Ref#90020326K0709
Custom Setup (Advance Users)
1.) Highlight the device on the local devices section and on the right side of IP Edit all
network information on the device will be displayed.
If the device is not on the same network a Red Exclamation mark will appear in the IP
Network information section
2.) To setup the device, you will need type in the correct Gateway and IP Address.
The Gateway Address: The gateway address can be obtained in Windows under the network
connections page
IP Address: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IP Edit and hit the submit button.
- 16-
Ref#90020326K0709
4.) Then hit the rescan button on IP Edit to confirm the changes have been made.
- 17-
Ref#90020326K0709
IP Service
How to use IP Service on IP Edit:
IP service allows the user to directly connect to his / her device through the internet without having to
remember long confusing IP Address. Instead you only need to remember the name of the device that the
you have selected. Then the user can connect to IP Service, type in the device name, and connect directly
to the device.
Note: The IP Kamera 9070 IRW requires you to select Server 2 on IP Service
Open IP Edit , the device will show up in the Local Device Section. If you have not selected a name for the
device, please refer to the section on the manual labeled: ―Naming your device‖.
To start IP Service, Hit the green connect button on the top of IP Edit .
3.) Once you have been connected search for your device by typing in at least the first 3 letters that you
named your device with. Then hit the search button.
4.) Double click on your device and an Internet Explorer window will appear connecting directly to your
device.
Note:It is crucial to have the IP Address of the device port forwarded from the router that you are using so
you can connect to your device from anywhere. Please refer to your routers user manual on how to port
forward your device.
- 18-
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.