Caution: Any changes or modifications not approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for FCC and CE. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
commercial environment.
Important Notice
1. IP Video 9100(B) is for indoor use only.
2. IP Video 9100(B) is not waterproof. Therefore we will not hold any
damage responsibility if IP Video is used under raining condition.
3. Be sure to use the DC adapter that is provided by your dealer. We will
not hold any responsibly if wrong DC adapter is in use.
4. Be caution in handling IP Video 9100(B) for physical shocks may
occur serious damage.
5. If IP Video 9100(B) does not operate properly, please contact your
local dealer for after sale service. In all cases, you are prohibited to
disassemble the product. If so, we do not hold any responsibility for
mal-function nor service warranty.
ADDITIONAL INFORMATION : FAQ ......................................................................................
- 3 -
VER. 2.32,
1. Product Overview
IP Video 9100(B) has an IP digital web server inside. With this great gadget you
can put up 4 different sources with only one set of IP, for example (live security
observing, online education, TV shows, video games and etc) make remote
locations immediately accessible through standard web browsers. IP video
9100( A) is equipped with cutting edge technology, includes 4 video in, either 1
video out (IP Video 9100) or 1 audio in ( Ip Video 9100B Plus ) , a web server, and
physical Ethernet connection. Therefore it does not need to plug in front of
computer, you can simply just plug into an internet line and start observing or
broadcasting from any where in the world.
FEATURES
IP Video 9100(B) features:
1. Embedded Web Server
2. Support 1 Video out (IP Video 9100) or 1 audio in ( Ip Video 9100B Plus )
3. With 4Video Input for Multi - video source from different area.
4. Round Robin (IP Video 9100B Plus only ) : display 4 video at same
screen – update in turns. and can record all four channel in
7. Color adjustment: Brightness, Contrast, Hue, and Saturation
8. Motion Detection:
- Three-Sensitivity Level.
- E-mail the Detected Images to preset e-Mail address.
- FTP the Detected Images to preset FTP server.
9. Support Network - Fixed IP, DHCP or PPPoE , and DDNS
10. Browser by Internet - IE (internet Explore) , NETSCAPE,
Mozilla Firefox ( LINUX ).
11. Support Active X control.
12. A Linux based server
‧10/100BT LAN supported
‧Built in JPEG Decoder
‧Motion detection
‧User may setup his email address in the system, let the system
notice the user when an event occur
‧Provide some GPIOs for different application
13. Support GlobalSign – no need to lower security level.
14. Work with MSN& Yahoo Messenger, AMCAP, and WMCAP & VIDCAP
program
15. Supply Exclusive IP Service for easily find on Internet by name
16. Report IP Address every two hours
- 4 -
2. Physical Description
BOX CONTENT
IP Video 9100 package content:
1 x IP Video 9100(B)
IP VIDEO 9100 & 9100B PLUS USER MANUAL
1 x RJ 45 internet line
1 x DC Power adopter (110~240V)
2 x Composite Cable (RCA jacks)
4 x BNC to RCA jacks
1 x CD (a. IP Editor program b. User Manual book)
1 x Quick Installation Guide
Minimum Requirement
≥ 300MHz Intel Pentium II and above
Windows 98 / SE / 2000 / ME / XP, or LINUX, MAC system
≥ 64MB memory
VGA Card:support Hi - Colors and above and direct draw
Internet card - RJ 45 (CAT 5)
Internet Hub / Router
Internet : one set of IP provided by your ISP
EX: xxx.xxx.xxx.xxx
- 5 -
VER. 2.32,
3. Panel Description
Back Panel: from left to right:
1. Power On / Off
2. 4 Video Input
3. Audio input
4. Reset Button
Side Panel:
1. DC Power - 5V, 110 ~ 240.
2. Network - RJ 45
- 6 -
4. Installation
Before using IP Video 9100(B), follow bellow:
Before installation:
Reconfirm your package content
Prepare a Hub for Internet monitor
Electricity 110 ~ 240 V
Hardware installation
IP VIDEO 9100 & 9100B PLUS USER MANUAL
1. Plug in IP Video 9100(B) Power 2. Plug in RJ 45 line to a HUB
3. Connect the HUB to Internet modem (ADSL/XDSL modem)
4. Connect Video source for IP Video box.
5. Turn you computer on
- 7 -
VER. 2.32,
SOFTWARE INSTALLER
Please follow the steps below to install the software.
1. Insert the CD in package and windows will auto-run. If not please browser the file
Autorun.html in CD. Chose the langrage you can read.
2. Click IP KamVid 1070 in driver of CD and click OPEN top install the driver
procedure.
3. Please follow the wizard to install all the program we suggest.
4. After install , you can see the shortcut of “IPEDIT” & “INFINITY Cam” on Desktop
and in program list of start
Add IP Service in IPEDIT
Click “ipEdit.exe” . Please affirm the power of 9100B
had been turn on and the Ethernet connection of RJ45 is correct.
A. LOCAL Devices area:
IPEDIT will searching all IP Products 9XXX series in the same local Ethernet, the
default name of 9100B is Cam-location, and display the information as Select.
1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be
displayed below. The IP address of IP Video 9100B should in the same subnet with
your PC, subnet mask, and default gateway mast same as 9100B.
For example, the IP address of 9060 is 192.168.10.9, so your computer needs to add
an IP address looks like 192.168.10.XXX to get connection to 9100B.
- 8 -
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.